ReviewsCast in place Anchors

Qualihome Heavy Duty ZINC Self Drilling Drywall Anchors and Screws Kit | Includes 50 Drywall Anchors 50#8 1-1/4 Inch Screws & Reusable Storage Case | Anchors are Made in The USA

  • Drill Point Pre-drills precise hole in wood or double drywall etc. No hole preparation required.
  • Starts easier than other drywall anchors, drills directly into drywall even if you hit a wood stud.
  • Deep thread design provides strong engagement in 3/8”, 1/2” or 5/8” gypsum wallboard.
  • Zinc die-cast design for maximum durability. Can be easily removed.
  • Kit Includes 50 Zinc Anchors, 50 #8 x 1-1/4'' Phillips Screws and a Plastic Case, Hangs up to 50 lbs. Packaging design may vary..
Check Stock

Blue Wave NE1228PR Aluminum Deck Flanges for Above Ground Pool Ladder, Pair

  • Anchors your in-pool ladder to your deck.
Check Stock

USTAR Truck Tie Down Anchors Bracket Plates Compatible with Ford F150 F250 F350 Raptor Replaces FL3Z-99000A64-B FL3Z-9928408-AB

  • [ FITMENT ] - This Tie Down set includes 4 Brackets (+ hardware) & 4 Locking Cleats (also known as Ford Box Link Cleats), fit Ford Trucks 2015-Present....
  • [ QUALITY ASSURANCE ] -Cconstructed of Die-cast Zinc with A Heavy-duty Plastic Housing, this Tie Down Bracket&Plate set featuring being Resists....
  • [ WIDELY USE ] - Bearing About 1000 Lbs for 4Pcs. Perfect for Commercial and Home Use..
  • [ EASY INSTALLATION ] - Easy bolt mounting, sliding bolts, and locking them in place. For Ford removable tie down anchors. No drilling is required.....
  • [ PACKAGE INCLUDED ] - Bed tie down undergo a strict quality test. Free and safe use, with our quality promise, use it easily and stay asured. 365....
Check Stock

WORKSITE 102PCS Drill Bits Set and Screwdriver Bits for Metal, Wood, Masonry, Drilling and Driving Accessories with Screws, Anchors and Roll Tool Pouch

  • Size list: 1 pc magnetic bit holder, 10 pcs CRV 1-inch screwdrive bits.
  • Drill bits: 4 pcs 5/32”, 4 pcs 3/16”, 4pcs 15/64”, 4pcs 5/16”.
  • Screws: 17pcs 1/8”screws, 10 pcs 1/6”screws, 10pcs 1/5”screws.
  • Plastic wall anchors: 22pcs 1/5”anchors,12 pcs 1/4”anchors, 8pcs 1/3”anchors..
  • Sturdy Drill Bits - The wood, metal, masonry drill bits are made of High Speed Steel (HSS) with titanium coating for hardwood, softwood, plywood, wood board, plastic, metal, concrete and other woodworking jobs..
  • Magnetic Bit Holder and Screwdriver Bits: The magnetic hex shank extension bit holder fits with almost familiar kinds of impact drivers. The screwdriver bits are made of S2 tool steel, hardness up to 60HRC, which has higher resistance of vibration and impact forces to chrome vanadium steel(CR-V)..
  • Anchors and Screws: Drywall anchors offer you the most effective solution for hanging or installing almost any type of item to drywall especially when there is no convenient stud located behind the wall..
  • Easy to Store and Portable - It comes with a roll tool pouch designed with different slots inside to make bits stay in place, without falling everywhere and missing..
Check Stock

Architectural Mailboxes 2541B-10 Villa Mailbox, Black

  • Mailbox is 18.7 in. W x 11.2 in. H x 5 in. D.
  • Constructed of die cast aluminum and then fully powder coated inside and out for corrosion resistance.
  • Durably constructed with stainless steel hinge pins.
  • Roof lifts opens for easy access mail retrieval.
  • 4-pre-drilled holes makes for an easy installation. Includes installation instructions and mounting hardware which includes.
  • screws and plastic anchors for brick and other masonry installations.
Check Stock

LEIMO KPARTS F150 F250 F350 Boxlink Tie Down Anchors Cleats Bed Tie Downs for Ford 2015-2021, Replaces for Ford FL3Z-99000A64-B Bed Cleats Box Link Kit (4 Pack)

  • WIDELY USE: Boxlink Bed Tie Down Anchors Compatible for 2015 2016 2017 2018 2019 2020 2021 ford truck F150 F250 F350 and Raptor Models.
  • Replace OE# FL3Z99000A64B/FL3Z-9928408-AB. design meets or exceeds OE specifications..
  • EXCELLENT QUALITY: Bed Cleats Box Link anchors constructed of Die-cast Zinc with heavy-duty ABS plastic housing and stainless steel lock assembly.
  • the Surface is sprayed with black anti-corrosion paint feature water-resistant and corrosion-resistant features perfect for all weather..
  • SAFE & RELIABLE: 4 boxlink cleat are heavy duty 1000 lb rings, They are perfect for adding tethering points to the truck, firmly fixing things on the inside of the truck bed, keeping you away from the swing and noise of the cargo. It makes your truck more efficient and safer..
  • EASY TO INSTALL: Easy installation without any tools, just slide the clip into the tie Down brackets, and then lock it with a key. Fits for Ford Removable Tie Down Anchors. No drilling is required..
  • QUALITY ASSURANCE: 100% Brand New Box link Bed Tie Down Anchors. To guarantee 100% customers’ satisfaction, we accept unconditional return service, please contact us if there’s any quality or other problem.
Check Stock

100 Pcs 1/4 x 3 Heavy Duty Nail Drive Anchors Rustproof Drive Pins Zinc Plated Drive Anchors for Metal Steel Aluminum Angles Wood Concrete Hammer Fasteners Kit

  • A Box of 100: there are 100 pcs of 1/4" x 3" drive nail anchors in the package, plenty enough to use and replace to easily meet your daily and party needs.
  • Size Information: with a size of approximately 1/4" in diameter and 3" in length, this heavy duty nail drive anchor requires drilling a 1/4" diameter hole in concrete prior to installation.
  • Please confirm the size before placing an order.
  • Strong and Reliable: featuring zinc plated steel material, heavy duty drive nail in anchors are strong and reliable, not easy to break, deform, bend or rust, easy to serve you for a long time.
  • Practicality: these zinc plated nail drive anchors can fasten sheet metal, steel, aluminum angles, wood, etc., to concrete, ideal for structural anchoring, shelf anchoring, mechanical and handrail installations.
  • Easy to Install: 1/4 x 3" drive anchors are simple to apply, hit them into the reserved hole with a hammer, and they can be easily installed without additional tools, saving time and effort.
  • Note: anchors cannot be taken out after use, please confirm the insertion point before use.
Check Stock

BEIJIAOFLY 4 Pack 2015-2021 F150 F250 F350 Boxlink Tie Down Anchors Cleats Bed Tie Downs with Tie Down Plates Brackets Anti-Theft Screws01

  • [ EXCELLENT QUALITY ] - This product is constructed of die-cast zinc with heavy-duty ABS plastic housing and stainless steel lock assembly. Black powder anticorrosive coating, you don't need to worry about the rain or other matters to make them rusted, they must keep in good condition to water.
  • [ FIT THE FOLLOWING MODEL ] - 2015 2016 2017 2018 2019 2020 2021 F150 F250 F350 and Raptor Models. Replace OE# FL3Z99000A64B or FL3Z-9928408-AB. Direct replacement for a proper fit every time, design meets or exceeds OE specifications, better option than the Ford original parts.
  • [ EASY TO INSTALL ] - Includes 4 Pack F150 BoxLink Tie Downs with keys and plates. Fits for Ford Removable Tie Down Anchors/ Bed Cleats. Quick 15 minute or Less Install.
  • [ WIDE RANGE FOR USE ] - The tie down anchors are heavy duty 1000 lb rings, they are ideal to add tie down points for a truck and let you far away from cargo's swing and noise.Excellent for commercial or home use.
  • [100% Satisfaction Guarantee] - Please make sure your model before you buy. If you have any question about our Tie Down Anchors, please contact us directly. We promise that you will get friendly customer service..
Check Stock

Fashion Anchor | 1 Pack of 36 Collar Stays for Men | No metal. No magnets. Just hold. | With discrete carrying sleeve

  • The most unique aspect of the Fashion Anchor is its ability to prop your collar up in a way that no other stays on the market can compete with. Great when wearing a blazer..
  • Fashion Anchors also work perfectly on those pesky polo shirt collars that seem to have a mind of their own... flopping out of place and curling at the edges..
  • You like an open collar but don’t want to look like John Travolta? Using the Anchor as a hidden button provides an easy solution to achieve that perfect amount of freedom you desire..
  • When wearing a tie, place the Anchors at the point of the collar. This gives your collar a very natural lay around the knot, unlike metal collar stays which can look stiff and unnatural..
  • Money back guarantee - If you don't find the anchors to be significantly better than the magnetic, metal, white 2.0, 2.2, 2.5 inch collar stays of the past, just let us know. We will refund you in full!.
Check Stock

Buhbo Floating Shelf Wall Mounted (8 inch x 12 inch) Heavy Duty Industrial Modern Steel, Black

  • CLEAN SIMPLE MODERN DESIGN: The wall mounted shelf has a thin profile that compliments any décor. The simple minimalist design is perfect for displaying items in the home bedroom, office, living room, bathroom, and commercial business spaces..
  • QUALITY FINISHED STEEL: The industrial steel will last a lifetime and can be reinstalled over and over. Made durable to be used in spaces like kitchens, garages, retail displays, and much more..
  • EASY INSTALLATION: 1/4 inch pre-drilled holes make it simple to place anchors into the wall for installation. Please use correct screws and anchors based on your wall type and intended use. Consult your local hardware store for more information. *Mounting hardware is NOT included*.
  • STURDY STORAGE: Heavy-duty shelf can be mounted and hold as much weight as the anchors you choose can support. Using drywall anchors/toggles, weights can be around 30 lbs, and 50 plus lbs when screwed directly into wood studs..
  • Included: (1) 1.5mm steel shelf, powder coated.
Check Stock

Buhbo Floating Shelf Wall Mounted (8 inch x 12 inch) Heavy Duty Industrial Modern Steel, White

  • CLEAN SIMPLE MODERN DESIGN: The wall mounted shelf has a thin profile that compliments any décor. The simple minimalist design is perfect for displaying items in the home bedroom, office, living room, bathroom, and commercial business spaces..
  • QUALITY FINISHED STEEL: The industrial steel will last a lifetime and can be reinstalled over and over. Made durable to be used in spaces like kitchens, garages, retail displays, and much more..
  • EASY INSTALLATION: 1/4 inch pre-drilled holes make it simple to place anchors into the wall for installation. Please use correct screws and anchors based on your wall type and intended use. Consult your local hardware store for more information. *Mounting hardware is NOT included*.
  • STURDY STORAGE: Heavy-duty shelf can be mounted and hold as much weight as the anchors you choose can support. Using drywall anchors/toggles, weights can be around 30 lbs, and 50 plus lbs when screwed directly into wood studs..
  • Included: (1) 1.5mm steel shelf, powder coated.
Check Stock