ReviewsCasting Valve Handwheel

Yongxingjin Metal Tire Valve Stem Caps Suit for Toyota TRD All Models car Accessories Stylish car Wheels air caps with Logo 2021122814

The valve cover is made of aluminum alloy, which is corrosion-resistant and durable..
One time die casting, surface exquisite electroplating, avoid metal oxidation, rust, effectively improve wear resistance, texture and gloss..
With the Rubber Seals inside，the cap can replace the original bad valve cap of the tyre and also show the beauty characteristic of the tyre. your tire valves, extend their serving life. of the tyre and also show the beauty characteristic of the tyre..
Protecting the valve core , corrosion due to direct contact with clay, water and snow..
Package included 4 valve caps. Any assistance,pls feel free to contact us..

Check Stock

TCP Global Commercial 5 Gallon (20 Liters) Spray Paint Pressure Pot Tank with Manual Mixing Agitator

2.5 Gallon Pressure Pot for Casting with Rubber Feet & Handle.
Features a Teflon coated steel tank for easy clean up..
Internal Dimensions : Wide: 9 ¼” , Deep : 10” with lid assembled.
Input connector, regulator, On/Off ball valve and pressure relief valve..

Check Stock

awagas 8\ x 8\ Lab Scissor Jack, 200mm Stainless Steel Laboratory Lifting Platform Lab Lift Table Lab Jack Stand Rack Scissor Lab-Lift Lifter, Height Range from 85mm to 280mm Load Capacity 15Kg

...se plate 200*200mm. The maximum load capacity is 15KG..
❥【NOTE】100% brand new. There is a protective film on the surface of the product, PLEASE peel off the protective film before use! The protective film of the product may be warped or burrs, but it does not mean that the product has been used. Tightening the handwheel helps to maintain stability. But pay attention to the rotation force, and avoid excessive force causing the handwheel to be unable to tighten..
❥【DURABLE AND ANTI-CORROSION MATERIAL】Lab lifting platform is made of sturdy and high-quality stainless steel material, anti-rust and corrosion resistant, strong and durable. Stainless steel top and bottom plate is NOT magnetic, galvanized iron stand is magnetic. The platform is flat, and the edge is not sharp..
❥【STEADY HEIGHT ADJUSTMENT】Stainless steel laboratory scissor jack has a very firm and steady base and a stable structure, which makes the lifting very steady and not easy to shake! The lab lifting platform is composed of an upper panel, a lower base plate, a rotating shaft, and a handwheel. Place the lifting platform steadily, and rotate the handwheel to adjust the upper panel of the lifting platform to the desired height..
❥【WIDE RANGE OF USES】The laboratory lifti....

Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.

Check Stock

Mr. Heater Handwheel

ALUMINUM ALLOY MATERIAL: This handle is made of high quality aluminum alloy, which is thick and durable. The handle can bear the pressure of hand pressing and not easy to be worn out..
EASY TO STORAGE: This black hand wheel is easy to fold and store without taking up too much space. The handle is made of reinforced nylon, which is more antiskid..
CONFORTABLE TO USE: The surface of hand wheel is smooth and comfortable. This foldable handwheel can bring you a better work experience, let you work more comfortable..
CONVENIENT OPERATION: This aluminum alloy hand wheel shank has smooth surface, flexible rotation and convenient operation. This hand-wheel is mainly used for processing cutting tools..
NICE HANDWHEEL: A good accessory to replace your old or bad hand-wheel, let you get rid of the trouble of machine parts difficult to use..

Check Stock

Partman Fit for 190627GS 16031 Excell EXWGV

Pressure Washer Manifold Kit 16031 190627GS 190574GS.
Kit Includes: Chemical Injector, Inlet Check Valve, 4 Mounting Bolts, and 4 Mounting O-Rings.
To fit model number 020228 -- Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold..
Excell Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like, you can remove the short one and install the longer one that is on the manifold.
Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..

Check Stock

Upgraded Mini Lathe 7\X14\

...iron with a powerful lathe motor:550W. High grade iron construction makes it more sturdy during turning, drilling, threading and cutting processing.Two rails provides smooth and durable moving..
【NEW UPGRADE DESIGN】-This upgrade mini lathe uses metal gear instead a nylon one,increase service life.Adopts aluminum handwheel is more durable than plastic handwheel,and not easy to be damaged.Digital display screen is convenient for you to follow up the processing.Add automatic power-off protection switch to make the operation safer.An extra lamp can help you finish processing in places with insufficient light.We provide one extra gear belt and free 7PCS lathe carbide tool..
【PRECISION DESIGN】-Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). A accurate self-centering 3-jaw is supplied,for holding a variety of round or square cylindrical materials stability.The metal lathe features forward and reverse design. The variable speed of MT4 Spindle range 0-2500RPM, two speeds are available for meet your different metal workings: Low Speed 0-1250RPM, High Speed 100-2250 RPM..
【PROFESSIONAL COMPOUND REST】-4-way quick change tool post can install 4 common turning tools at the same time.....

Check Stock

American Standard 4175701.002 Colony Choice 1-Handle Kitchen with Side Spray Faucet, Polished Chrome

Ceramic Disc Valve Cartridge - assures a lifetime of drip-free performance.
Cast Brass Waterways with "City Shanks" - strong and durable and integral tabs on casting provide a wobble-free installation.
Memory Position Valving - allows user to turn valve on and off at preferred temperature setting without readjusting handle position each time.
Large "Comfort Zone" - allows easy fine tuning of temperature.
Simple Installation - fast and easy one person installation. Faucet drops in from top. Quick spin nuts secure faucet in place.

Check Stock

Aupoko Propane Refill Adapter Hose 36’’ Propane Refill Hose with POL Type 1LB Tank Bottle Adapter and ON/Off Control Valve 350PSI Rated High Pressure Propane Extension Hose

Perfectly replace the 16.4 oz/1 pound small propane tank-connect the 1 pound propane equipment directly to the 5-100 pound internally threaded propane....
Out of the box-no need to purchase additional regulators, directly connected to gas grill, camping stove,griddle,outdoor heater, trailer, propane....
1lb Propane refill adapter-add a 1lb inflation valve, suitable for all small cylinders of 1lb tanks, fill 1lb cylinders with gas from large tanks,....
Easy to install-don't need any tools, just use your hands, follow the instructions on the handwheel and turn it counterclockwise, you can easily....
100% after sales service-If it is found to be unsuitable after purchase, or damaged in transit, you can get a 100% refund service, please rest assured....

Check Stock

Valve stem Cover 4 Pieces Black Metal tire Cover with Logo Badge Applicable to Mercedes-Benz Valve Cap New C-Class A-Class E-Class C200L E300L GLC GLA GLK GLE Accessories

[Aluminum] High-grade anodized aluminum tire valve cover.
4 pieces/pack. Customized tire valve stem caps, suitable for all valve stems, conform to....
[Process] One-time die-casting, exquisite plating on the surface, to avoid metal oxidation, rust, and effectively improve wear resistance, texture and....
[Functions] FIRST:Protecting the valve core , corrosion due to direct contact with clay, water and snow. SECOND:Preventing the flat tire and ensure....
[Easy to install] It can be easily installed and disassembled without any tools, everyone can tighten the tire valve stem in a few seconds..
[100% Satisfaction Guarantee] High-quality materials to ensure driving safety! If you have any questions, please feel free to contact us..

Check Stock

Yosoo Health Gear 6 Terminal CNC Pulse Encoder, Electronic Hand Wheel Manual Pulse Generator Encoder, 5V 60MM(White)

[6 terminal]: This CNC electronic handwheel has 6terminal, and the diameter is 60mm/2.36in.
[Material]: Made of high grade metal and plastic, this electronic handwheel is durable in use and easy to install.
[High Performance]: High reliability, 6mm terminal connection type.
Ultra-thin and lightweight design, metal gear, smooth rotation, no sticking point position.
[Application]: Widely used for CNC numerical control system, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc.
[100% Satisfaction]: If you have any question about this item, please feel free to contact us, we will help you within 24 hours on weekdays.

Check Stock