ReviewsCastle 141slash 4x4

Traxxas Slash 4X4: 1/10 Scale 4WD Electric Short Course Truck with TQi Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 68086-4 - Slash VXL 1/10 4x4 Short Course Truck RTR w/TSM, Orange.
  • Features: Traxxas Stability Management TM (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 reaches speeds in excess of 60+mph!*. Maxx Cable 12-gauge wire. Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow. Velineon VXL-3s Electronic Speed Control. LiPo and NiM.
  • Includes: (1) Slash 4X4 Short Course Race Truck w/TQi 2.4GHz Radio System (1) Brushless ESC and Motor (1) Body, Decals Illustrated Instruction Manual.
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Side-to-Side Center Ground Clearance: 2.83" (72mm) Body Dimensions: Length: 21.25" (540mm) Width: 11.5" (292mm), Height: 5.5" (140mm) Spur Gear: 54 tooth, 0.8 Module 32 Pitch Pinion Gear: 13 Tooth.
  • Part number(s) included (in factory packaging): 68086-4.
Check Stock

OGRC 4PCS Aluminum Front & Rear RC Shocks Absorber Assembled Full Metal Big Bore Shocks Upgrades Parts for 1/10 Traxxas Slash 4x4 Shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 RC Car Replace 5862 (Red)

  • 【Compatible】The RC Shocks is perfect compatible with:1/10 Traxxas Slash 4x4 / Stampede VXL 4x4 / Rustler 4X4 VXL / Hoss 4X4 VXL Trucks etc. Replacement of Stock Model Part# 5862 (Notice: Not compatible with Slash 2WD, Stampede VXL 2WD, Rustler VXL 2WD, Ford F-150 Raptor, Bandit)..
  • 【Sturdy Material】The slash shocks is made of lightweight All aluminum alloy material, which is durable and corrosion resistance, improves the performance of the rc trucks..
  • 【4 RC Shocks Absorber Set】2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm), with screws..
  • 【Provide Nice Damping Effect】For the ultimate in bump and jump control. metal shock bores, and metal shafts offer incredible durability and near frictionless operation for ultra smooth damping and long-lasting performance..
  • 【Thoughtful and Practical】The main body part adopts the threaded design, which allows an easier and quicker installation, also will help to quick ride height adjustments and pre-load tuning ability, and improve the stability when the RC car run on the road..
Check Stock

Traxxas Slash 4X4: 1/10 Scale 4WD Electric Short Course Truck with TQi Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 68086-4 - Slash VXL 1/10 4x4 Short Course Truck RTR w/TSM, Vision Ed..
  • Features: Traxxas Stability Management TM (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 reaches speeds in excess of 60+mph!*. Maxx Cable 12-gauge wire. Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow. Velineon VXL-3s Electronic Speed Control. LiPo and NiM.
  • Includes: (1) Slash 4X4 Short Course Race Truck w/TQi 2.4GHz Radio System (1) Brushless ESC and Motor (1) Body, Decals Illustrated Instruction Manual.
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Side-to-Side Center Ground Clearance: 2.83" (72mm) Body Dimensions: Length: 21.25" (540mm) Width: 11.5" (292mm), Height: 5.5" (140mm) Spur Gear: 54 tooth, 0.8 Module 32 Pitch Pinion Gear: 13 Tooth.
  • Part number(s) included (in factory packaging): 68086-4.
Check Stock

FriHobby RC Shocks All Metal Aluminum Threaded Absorber Damper Upgrades Parts for Traxxas Slash 4x4 Rustler 4X4 Stampede 4X4 Hoss 4X4 Replace 5862 Big Bore Shock Set (Navy Blue)

  • Compatible with:1/10 Traxxas Slash 4x4, Stampede 4x4 VXL, Rustle 4x4 VXL, Hoss 4X4 VXL, Bandit RC Trucks.(Notice: Not compatible with Slash 2WD, Stampede VXL 2WD, Rustler VXL 2WD, Ford F-150 Raptor).
  • The slash shocks is made of Aluminum Alloy material,high protection and long durability, improves the performance of the rc trucks. Ideal replacement of 5862 Big Bore Shock Set, with springs (come without pre oiled, so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

Gens ace 4S LiPo Battery 7000mAh 14.8V 60C 4S HardCase with Deans Plug for RC Car Boat Truck

  • Gens Ace 14.8V 7000mAh Lipo battery Specification：Battery Voltage：14.8V；Configuration：4S1P；Capacity：7000mAh；Discharge：60C；Plug: Deans Plug..
  • Dimensions: Gens Ace 7000mAh 4S Lipo battery dimensions is: 138*47*49mm/5.43*1.85*1.93inch(L*W*H).
  • High Performance: Gens Ace 4S 7000mAh Lipo battery with 60C discharge rate hardcase offers high power and very long time for your RC Model..
  • Application: Gen Ace 4S 7000mAh Lipo battery specially compatible with 1/8 & 1/10 RC car model such as Slash 4X4 Ultimate, Slash 4X4 Ultimate, Slash VXL, Traxxas Bandit Bandit VXL E-Maxx (Brushed), ect.
  • What you get: The Gens Ace battery comes with a 60 days money back and a 18 months warranty and with 24 hours friendly customer service. Please enter “YOU ORDER” to contact us directly if you have any problems with our product..
Check Stock

Hobbypark 4PCS Aluminum Front & Rear Shocks Absorber Assembled for 1/10 Traxxas Slash 4x4 4WD 2WD Rustler Stampede Upgrades Option Parts, Replacement of 5862

  • ✔Compatible with 1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 / Hoss 4x4 VXL, etc..
  • ✔Check Size before Buying.2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx mm 115mm),w/Screws.
  • ✔Replacement of Stock Model Part# 5862.
  • ✔Pack of 4 (These Shocks come without pre oiled so make sure you get some before installing).
Check Stock

for Traxxas Slash Rustler Bandit Vxl 4X4 4WD 2WD Orange Parts Shocks Absorber Front Rear 1 10 Damper Short Course Racing Truck Upgrade 4-Pack

  • ✔ Compatible With traxxas slash 4x4/ traxxas rustler 4x4 vxl/traxxas slash 2wd/traxxas rustler/traxxas bandit/traxxas stampede/Rally 4X4/Hoss 4x4 VXL.
  • ✔ Fitted Really Well.Oil Filled Style,Adjustable Tension,Very Smooth And Durable.Good for Big Jumps..
  • ✔ Alloy Aluminum Front Shock Absorber : Approx.100mm.
  • Alloy Aluminum Rear Shock Absorber : Approx.110mm.
  • ✔ 4 Shocks Per Package. All Hardware For Assembly Included..
  • ✔ Premium Quality Aluminum Shocks Upgrade Parts Ship Fast .Responsive Customer Service..
Check Stock

RC R/C car Truck Decal Sticker kit - Dukes of Hazzard - Black & White Version ONLY - 1/10 1/8 Scale

  • This is the custom body with painting and decals for the Slash and Slayer. It is the same specs as the stock body..
  • These are for bodies ONLY, truck not included..
  • Can be used on 1/10 Slash 6811 T/E Maxx, Summit 4x4 VXL 2WD Slayer Baja Truck or Car..
  • Body already painted, holes already drilled for the Slash..
  • Please note: in order to mount to models other than the Slash, you will need to drill new holes and possibly adjust mounting posts height..
Check Stock

Hobbypark 4PCS Aluminum Front Rear Shock Absorber Assembled for 1/10 Traxxas Slash 4x4 4WD Slash 2WD Upgrade Parts,Replace 5862

  • ✔Compatible with:1/10 Traxxas Slash 4x4 2WD / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc.
  • ✔Check size,2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx mm 115mm),w/Screws.
  • ✔Replacement of Stock Model Part# 5862.
  • ✔Pack of 4 (These Shocks come without pre oiled so make sure you get some before installing).
Check Stock

Hobbypark Shock Absorber Assembled Front & Rear Shocks Replace 5862 for 1/10 Traxxas Slash 4x4 4WD Upgrade Parts (4-Pack) (Blue)

  • Compatible with:1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc..
  • 2x Front Shock Absorber ,Aluminum Cap & Plastic on the bottom (Total length:approx 100mm).
  • 2x Rear Shock Absorber, Aluminum Cap & Plastic on the bottom (Total length:approx mm 115mm).
  • Pack of 4 (These Shocks come without pre oiled /Just Little for testing purpose,so make sure you get some before installing).
Check Stock

Compatible Custom Body Black Replacement for 1/10 Scale RC Car or Truck (Truck not Included) SSJ-BK-01

  • This is the custom body with painting and decals for the Slash and Slayer. It is the same specs as the stock body..
  • These are for bodies ONLY, truck not included..
  • Can be used on 1/10 Slash 6811 T/E Maxx, Summit 4x4 VXL 2WD Slayer Baja Truck or Car..
  • Body already painted, holes already drilled for the Slash..
  • Please note: in order to mount to models other than the Slash, you will need to drill new holes and possibly adjust mounting posts height..
Check Stock