ReviewsCellulose Fiber Cement Board

Ghostrunner - PlayStation 5

  • Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM.
  • Perfect for slicing through fiber cement board and laminate flooring.
  • Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts.
  • Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear.
  • Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws.
Check Stock

AAWipes Lint Free Wipes Disposable Cleaning Wipes Cleanroom Wipes Cellulose/Polyester Blend 6\ x 6\ (Grade B, 56 GSM) Bag of 300 Pcs General Purpose Lab Wipes Dry Dustless Wipes

  • MATERIAL: Fabricated from a hydro-entangled, non-woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic wiper..
  • EATURES: Combination of polyester with excellent wet and dry strength and cellulose with high absorbency of most common solvent. Truly 68 Gram Heavy Duty Wipes with superior oil absorbance, abrasion and chemical resistant. Designed for all-purpose wiping where economy and cleanliness are of critical importance, Excellent for picking up aqueous or oil spills. Suitable for cleaning precision components and lab apparatus. Low unit cost with repeatably use and good quality..
  • APPLICATIONS: Non-woven wipes designed for SMT electronics factory to remove excess solder paste on the circuit board, it can keep the circuit board spotless, optical instruments to manufacture a variety of electronic, electrical, precision instruments wipe. Cleaning of printing machines.
  • PACKAGEļ¼š6" Length x 6" Width, 300 wipers/bag. They are all treated with proper edge treatment and....
Check Stock

Malco TSF2 TurboShear Fiber Cement Backer Board Shear

  • Attaches to a drill or impact driver you already own.
  • Easily cuts 1/2-inch backer board and 5/16-inch Fiber Cement Siding Plank with minimal dust.
  • 360 degree rotating head for optimum tool clearance and material flow.
  • Able to cut precise arcs, straight lines and fine trimming.
Check Stock

DEWALT DCS498B 20V Max Cordless Fiber Cement Shears (Tool Only)

  • Variable speed trigger allows operator to adjust speed of cut during use..
  • Led light with 20 second delay after trigger release.
  • Little to no dust created during cutting action.
Check Stock

MAGBIT 625.4016 MAG625 2-1/2-Inch Carbide Grit Holesaw with 1-1/2-Inch Depth

  • CUTS BRICK, CONCRETE BLOCK, FIBER CEMENT SIDING AND BACKER BOARD, STUCCO, OLD PLASTER, CONCRETE PAVERS.
Check Stock

SENCO 08T125W 8-Gauge 1-1/4 in. Collated Cement Board Screws (1,000-Pack) Pack of 2

  • 08T_W Series 08T125W Cement Board Screw with Nibs, #8 Thread, 1-1/4 in L, Flat Head, #2 Drive, Steel.
  • Cement board to wood screws with exterior finish..
  • For cement board to wood. Fits DS440AC (557.4876), DS425AC (557.4827), DS332AC (264.0720), DS212-18V (264.0662), DS312-18V (305.6512)..
Check Stock

cSeao 20 Pieces 3/16-24 x 2 Drywall Toggle Anchors Bolts Wing Nuts for Heavy Duty Drywall Ceiling TV Zinc Plated

  • - Product name: Drywall Toggle Anchors Bolts wing Nuts Kit.
  • - Can be used for a wide range of hollow wall and mounting parts thickness, product suitability.
  • - Fold the expansion arm to insert the hole, no need to unscrew the screw, the installation is simple, the expansion arm automatically spreads behind the hollow substrate, forming a large radius and large area contact, providing a reliable anchoring effect.
  • - Easy to install with a regular Phillips screwdriver.
  • - suitable for installing lamps / curtain rods / photo frames / coat racks / power switches and other light-loaded objects Can be used for hollow brick / gypsum board / cement fiber board / wood board and other hollow substrates.
Check Stock

MAGBIT 625.4816 MAG625 3-INCH CARBIDE GRIT HOLESAW WITH 1-1/2 INCH DEPTH

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

MAGBIT 625.3216 MAG625 2-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

MAGBIT 625.6416 MAG625 4-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth White

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

MAGBIT 625.1816 MAG625 1-1/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock