ReviewsCenter Bearing Support For

WFLNHB Live Center 2MT 60 Degree Lathe Medium Duty Live Tailstock Center for Wood & Metal Lathe CNC Work

  • Specification: #2 Morse Taper (2MT) shank, 60-degree point, 5000 Max RPM, 600 lbs max workpiece weight, runout of 0.0004in/0.01mm T.I.R..
  • Material: The live revolving center is made of precision ground hardened steel, hardened to 61-65HRC, with high rigidity and wears resistance.
  • Triple Bearing Design: The 2MT activity center adopts a combination of a thrust ball bearing and two ball bearings for stable and smooth rotation.
  • Seal Ring: There is a seal ring at the front gland to prevent the entry of cutting fluid and dust.
  • Application: The live center MT2 is specially designed for lathes under medium-speed and medium-load environments. It can be used for high-speed turning and is suitable for CNC lathes.
Check Stock

Martin Furniture Hartford Credenza, Brown - Fully Assembled

  • Black paint with a Twelve Step two toned hand rubbed finish with light physical distressing.
  • Drop front keyboard/pencil drawer, Three utility drawers with dividers, and One locking letter legal file drawer.
  • Power center with two AC power outlets and three USB 2.0 connections.
  • Full Suspension steel Ball bearing drawer glides provide drawer support and enable a lifetime of smooth operation.
  • Fully Assembled, Dimensions: 31" W x 21" D x 69.5" H.
Check Stock

Barn-Shed-Play S/4 Glider Bearing Arm Brackets - 7 1/2' from Hole to Hole

  • Set of 4 glider bracket arm with ball bearings..
  • 11 guage steel construction with yellow zinc plating.
  • Center hole to center hole: 7-1/2". Overall dimensions: 9-1/4" x 1-1/2"..
  • Bearing: 5/16". Offset: 1-1/2". Weight limit is 250 lbs per glider bearing arm. 1000 lbs total..
Check Stock

2Pcs Adjustable Height Center Support Leg for Bed Frame Bed Center Slat Heavy Support Leg Extra Durable Steel Furniture Foot | Suitable for Bed Frame Sofa Furniture Cabine Foot Legs 7.08 -13.3

  • ...esponding bracket on the bed frame, clamp the bed frame, put in the screws to adjust the distance, and tighten it..
  • Material: Made form high quality steel, Electrophoresis black to prevent rust and corrosion, ensuring a long life and preventing damage to your bed. we have thickened the pipe wall to make it more load-bearing. Leg bottom PVC pad are non-slip and wear resistant, won't be harm and scratches to your floors and it has better grip..
  • Hardware included: 2 pcs Height Adjustable from 7.08" to 13.38" Adjustable Height Center Support Leg,4pcs 2.48"screw，2pcs supplementary plate. No extra trips to the Hardware Store. If you find the product is damaged or missing parts, please contact us for a free replacement..
  • The design is a cost effective way for maintaining the life of your expensive bedbase / Wooden Slat / Mattress Foundation / Platform Bed Frame / Box Spring .The bed frame support legs will hold and evenly distribute the weight of your heavy mattress efficiently protecting your bed and mattress from sagging and damage .Saving you money on bed repairs and mattress replacements..
Check Stock

SR Performance Clutch Alignment Tool; 10 Spline

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.
Check Stock

Martin Furniture Hartford L-Shaped Desk, Brown

  • Material: Manufactured wood with solid wood veneers. Dimensions-80 x 70 x 31 inches.
  • Black paint with a Twelve Step two toned hand rubbed finish with light physical distressing.
  • Two drop front keyboard/pencil drawers, Four utility drawers with dividers, and two locking letter legal file drawers.
  • Two grommets for wire management creates a clean look by easily hiding unsightly wires.
  • Power center with two AC power outlets and three USB 2.0 connections.
  • Finished on all sides for placement anywhere in a room..
  • Full Suspension steel Ball bearing drawer glides provide drawer support and enable a lifetime of smooth operation.
Check Stock

Garage Storage Wall Shelving Mounted, 4PCS 2x3ft, Loads 1000 lbs Heavy Duty Sturdy Wall Shelves, Strong Garage Organiser, Storage Racks Units, Black Metal Floating Adjustable Wall System Shelf

  • ...S), Greatly increased compression resistance, Not easy to deform. Seamless overlay welding of multilayer components, Overall relief of top layer pressure. When either used as a corner shelf or wall shelf, Reverse bracket design is more stable and sturdy. Because Dtrik garage storage have 2 x Support Rods, Therefore bearing capacity reach the high..
  • SPECIFICATIONS✔: Garage storage shelf 2*3 feet for one piece size, bracket arc height 0.5 feet. Heavy-duty powder coated steel garage storage shelves set each component with high quality hardware provided. Depending on the weight bearing of the wall and the installation environment. Maximum load capacity is 250 lbs per piece.
  • INSTALLATION✔: 1.Measure the locking distance of the brackets.
  • 2.Place against the wall installation template at a suitable height by spirit level.
  • 3.Mark the center of the circle on locating hole with suitable width.
  • 4.Remove the installation formwork, Punch on the marked point.
  • 6. Fixed mesh plate on brackets by screws and nuts.
  • 7.Connect multiple grid shelves by U-shaped screw. QUICK INSTALLATION SUCCEEDED..
  • IMPORTANT✔: 1ps: This suspension frame is suitable for installation on concrete or wooden walls. If it is a keel frame, please check the hole spacing we....
Check Stock

Martin Furniture Hartford Open L-Shaped Desk, Brown

  • Black paint with a Twelve Step two toned hand rubbed finish with light physical distressing.
  • Two utility drawers provide ample storage for both work and home needs.
  • Power center with two AC power outlets and three USB 2.0 connections.
  • Full Suspension steel Ball bearing drawer glides provide drawer support and enable a lifetime of smooth operation.
  • Finished on all sides for placement anywhere in a room.
  • Leg assembly required on the desk and return, Dimensions: 31" W x 76" D x 60" H.
  • Additional Dimensions : Return 47.5 w x 31.0h x 21.0d.
Check Stock

Southwest Wheel 3,500 lbs Trailer Axle Self Adjusting Electric Brake Kit 5-4.5 Bolt Circle

  • Pair of TruRyde 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud).
  • Pair of TruRyde 10" x 2 1/4" self adjusting TruRyde electric backing plates.
  • Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles.
  • Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, and brake mounting washers and nuts.
  • Built for 84 spindles with a 4 hole brake flange (inner bearing L68149, outer bearing L44649).
Check Stock

NAIERDI [4 Pack] Lift Support,Gas Strut,Soft Close Hinges,100N/22lb Gas Spring Lid Support Kitchen Cabinet Hinges Toy Box Hinges Gas Shocks

  • 100N GAS SHOCKS: Bearing weight: 100N / 22lb (Per Strut), 4 struts included. Length (hole center to hole center) :10.63 inch, Travel length: 3.62....
  • SOFT CLOSE HINGES: This lid hinge can help open/close your kitchen overhead cabinets or toy box slowly to prevent from slaming or bumping..
  • STABLE & RUST PROTECTION: Quality hinge head and better piston make lid support bracket work steadily. Copper core and zinc plating prevent it from....
  • APPLICATIONS: This gas spring lift is suitable for various kitchen cabinets, toy box, trunks and rv cabinets and so on..
  • 1 YEAR QUALITY WARRANTY: NAIERDI offers 1 year 100% satisfactory warranty. If there's a product quality issue or installation problems, please feel....
Check Stock

UCT202-010T NTN New Ball Bearing Take Up

  • Take-up block with spherical roller bearing insert for use with a Rexnord center pull frame.
  • Cast-iron housing and self-aligning steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing take-up block for maximum strength and rigidity.
  • Fixed-type bearing with a single setscrew locking collar for secure attachment to a cylindrical shaft.
  • Metal clearance seal for no speed or temperature limitations, and no frictional drag.
Check Stock