ReviewsCentering Guide

BicycleStore 9PCs Self Centering Drill Bit Set, Hex Shank Self Center Hinge Drill Bits Tool for Woodworking Window Door Hinge with 1 Hex Key and 8 Drill Bits 5/64'' 7/64'' 9/64'' 11/64'' 13/64'' 5mm 1/4

  • 【Package Includes】 Hinge drill bit set comes with 8 colorful common hinge screw sizes 5/64", 7/64", 2 x 9/64", 11/64", 13/64", 1/4", 5mm.
  • 【High Quality】 High quality steel self centering drill bits with high hardness, which is rustproof, solid, durable and superior drilling performance which is guide for centering the pilot holes needed for the hinges..
  • 【Reasonable Design】 Double-sided hole design fast and automatic discharge sawdust from the hole on both sides, without drill blocked, which helps you save time in removing sawdust..
  • 【Easy to Use and Install】 Different hardness wood, need different self centering drill, you just use the hex keys take the screw apart and replace the drill with new one. Perfect carpenter tool for woodworking, wooden doors, cabinets, windows, etc..
  • 【Widely Used】 Applicative for furniture, kitchens, woodworking, window door etc. It can be adjusted appropriately according to the hardness of the wood. If the wood is soft, you can choose the smaller one, if the wood is hard, you can choose the corresponding one or the larger one..
Check Stock

BicycleStore 17PCs Self Centering Drill Bit Set, Hex Shank Self Center Hinge Drill Bits Tool for Woodworking Window Door Hinge with 1 Hex Key, 8 Drill Bits 5/64” 7/64” 9/64” 11/64” 13/64” 5mm 1/4′

  • 【Package Includes】 Hinge drill bit set comes with 8 colorful common hinge screw sizes 5/64″, 7/64″, 2 x 9/64″, 11/64″, 13/64″, 1/4″, 5mm.
  • 1 x hex keys, 8 x spare drill bits (for replacing the each 8 sizes self center drill bits)..
  • 【High Quality】 High quality steel self centering drill bits with high hardness, which is rustproof, solid, durable and superior drilling performance which is guide for centering the pilot holes needed for the hinges..
  • 【Reasonable Design】 Double-sided hole design fast and automatic discharge sawdust from the hole on both sides, without drill blocked, which helps you save time in removing sawdust..
  • 【Easy to Use and Install】 Different hardness wood, need different self centering drill, you just use the hex keys take the screw apart and replace the drill with new one. Perfect carpenter tool for woodworking, wooden doors, cabinets, windows, etc..
  • 【Widely Used】 Applicative for furniture, kitchens, woodworking, window door etc. It can be adjusted appropriately according to the hardness of the wood. If the wood is soft, you can choose the smaller one, if the wood is hard, you can choose the corresponding one or the larger one..
Check Stock

Incra PROTRAC06 6-Inch Precision Marking Protractor

  • Protractor lets you plot any angle with ease and absolute accuracy.
  • T-Bar and see-through crosshairs provide perfect alignment.
  • 6-inch centering scale with micro-fine marking holes at every 1/32 inches.
  • Four angle scales, including one for marking narrow stock.
  • Micro-fine guide holes at every 45-, 30-, 22.5-, 5-, 1-, and 0.5-degree intervals.
Check Stock

6

  • 7/16" Thick Steel Faceplate - Heavy and Rigid.
  • 8 Screwholes on 2 guide rings for easy centering.
  • Flat spots cut on back spigot for easy removal from lathe.
Check Stock

Sparco SPR01796 Heavy-Duty Adjustable 9/32' 3-Hole Punch

  • Features: Adjustable Center, Centering Guide, Removable Chip Tray.
  • Punch Positions: 2 Hole, Punch Positions: 3 Hole, Punch Size: 0.28".
Check Stock

Hymnorq 3/8 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 5pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, Perfect Drilling in Stainless Steel and Cast Iron

  • ...R METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 5PC SET - The set includes 5pcs of 3/8” diameter M35 grade cobalt steel twist drill bits, packed in a convinient and reuseable PVC case for easy storage and carrying. Manufactured to German DIN338 standard..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock

Honing Guide Jig for Sharpening System Adjustable Stainless Steel Honing Guide Chisel Plane Iron Planers Blade

  • Our stainless steel honing guide is painted with a blue anti-corrosive finish for longer life and a more elegant look..
  • All standard sharpening angles can be achieved using this sharpening jig by adjusting the tool projection..
  • Self centering and fully adjustable, this sharpening guide fits chisels from 1/8” to 1-7/8” in width, and plane irons from 1-3/8” to 3-1/8” in width..
  • Our Honing Tool features a hardened steel roller wheel which will not wear down over time or develop flat spots..
  • The body of the chisel sharpener is crafted from durable cast aluminum..
Check Stock

NT Cutter Circle Cutter, 11/16 Inches ~ 6-11/16 Inches Diameter, 1 Cutter (C-1500)

  • Cutting material: paper/card stock/soft film/leather/thin rubber sheet/any other thin material.
Check Stock

Hymnorq 1/2 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 2pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, for Drilling in Stainless Steel and Cast Iron

  • ...METALWORKING – Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • SELF CENTERING – The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not “walk” or “wander”. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 2PC SET – The set includes 2pcs of 1/2” diameter fractional inch size M35 grade cobalt steel twist drill bits. Total lenght: 5.98 inch.
  • working length: 4.49 inch. Manufactured to German DIN338 standard. Packed in a plastic bag and a flat paper box..
  • DOWNLOADABLE USER GUIDE – We’ve summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock

Hymnorq Metric 1.0-10 mm Straight Shank M35 Grade Cobalt Steel Jobber Length Twist Drill Bits Set of 19pcs for Metals, Packed in Indexed Metal Case

  • ...LT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit..
  • SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 19PC METRIC SET - The set includes 19pcs of M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7 mm, 7.5mm, 8 mm, 8.5mm, 9 mm, 9.5mm, 10 mm. Well organized in a tough metal indexed storage case for easy transport to your worksite..
  • FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust....
Check Stock

Hymnorq 7/16 Inch Dia. x 5.51 Inch Long M35 Cobalt Steel Twist Jobber Length Drill Bits 2PC Set, 135 Degree Split Point, Extremely Heat Resistant, for Stainless Steel and Cast Iron

  • COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to create a hardened heat-resistant alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times compared with an average HSS drill bit..
  • SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 2PC 7/16 INCH FRACTIONAL BITS - The set includes 2pcs of M35 cobalt steel twist drill bits. Total length: 5.51".
  • working length: 4.06". Manufactured to German DIN338 standard. Packed in a plastic bag and a flat paper box..
  • FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the ....
Check Stock