ReviewsCentering Spacers

Legends Card Grading Centering Tool with Cleaning Cloth Kit Material for PSA - BGS - Graded Card Submissions Card Center Tool

PERFECT CENTERING IS A MUST! - Save money on card grading fees with our card grading tool. You can easily determine if your card meets the centering requirements for PSA or BGS submission. Works with any standard sports card or TCG card games including Pokemon, MTG, or Digimon..
REMOVE PROTECTIVE COVER ON PLASTIC BEFORE USE! - Our tool ships with protective covering on both sides to ensure that your tool is not scratched when you receive it..
BEST MATERIAL ON THE MARKET! - Our tool is made with a high quality crystal clear acrylic material that won't warp, smear, bend, or crease..
EASY TO USE! - Our centering guide is easy to use, simply place over the card you wish to check, take the measurements, and reference the centering tool percentages guide. With our card grading tool you can check the centering from left to right and top to bottom..
INCLUDES BONUS CLEANING CLOTH! - You can wipe your cards down before using the tool to prevent any damage and throw them right in a sleeve for grading!.

Check Stock

Bosch RA1151 Router Subbase Centering Pin and Cone

For precise centering of template guides and attached subbases.
For Bosch routers that have the Precision Centering Design.

Check Stock

Lug Ripper Tool Kit

Removes the most difficult locking bolts quickly, safely and without damage to wheels or rim.
Great for all vehicles with lost or damaged locking lug bolt keys.
Operation time is approximately 8 minutes per wheel.
Includes: (4) nylon internal centering guides, (3) metal external centering guides, (1) metal centering guide for free turning lugs, (2) special ultra hard drills, (4) extractors, (1) impact extractor holder, and (1) impact extractor remover.

Check Stock

Lug Ripper II - Lug Nut Remover

Removes the most difficult locking bolts quickly, safely and without damage to wheels or rim.
Great for all vehicles with lost or damaged locking lug bolt keys.
Operation time is approximately 8 minutes per wheel.
Includes: (4) nylon internal centering guides, (3) metal external centering guides, (1) metal centering guide for free turning lugs, (2) special ultra hard drills, (4) extractors, (1) impact extractor holder, and (1) impact extractor remover.

Check Stock

ECCPP 1.25

HUB CENTRIC SPACERS 6 LUG FITMENTfits for.
6 LUG SPACERS PARAMETERBrand New Wheel Spacers. Thickness:1.25", Bolt Pattern:6x5.5", Center Bore:78.1mm, Thread Pinch:14x1.5.
6X5.5 WHEEL SPACERS HUB CENTRIC ADVANTAGEDesigned to move the wheels further out from the hub, giving your vehicle a more aggressive stance and allows for better handling characteristics. They also increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires..
SPACERS 6X5.5 TO 6X5.5 SAFETYMade from the best true T 6 billet aluminum, with heat treated and hardened 10.9 grade bolts pre-installed. The anodized surface provides additional resistance to corrosion. Exceptionally sturdy and lightweight compared to steel spacer..
WHEEL SPACERS HUBCENTRIC 6X5.5 SERVICE Contact our friendly, helpful, and knowledgeable customer service representatives if you have any questions, we will be glad to address any questions or concerns promptly..

Check Stock

Toledo Pipe 44165 Rear Centering Assembly D970 fits RIDGID 300 Pipe Threader

Toledo Pipe Tools is proud to give you alternative high quality replacement parts..
A replacement rear centering assembly fits RIDGID 300 and RIDGID 300 Compact.
Replaces Rear Centering Assembly on RIDGID 300 Power Drive 41855 75075.
Replaces Rear Centering Assembly on RIDGID 300 Compact 66947.

Check Stock

SCITOO 4Pcs 6x5.5 Wheel Spacers 2 inch with Studs 12x1.25 Bore 108mm 6 Lug 50mm Wheel Spacers 6x139.7mm fit for QX56 for Armada for Xterra Wheel Spacers

【 6x5.5 Wheel Spacers Kits 】 6 Lug No Hubcentric Wheel Spacers Specifications.
Studs: 12x1.25. Package contains: 4Pcs 2 inch wheel spacers 6x5.5 + 24Pcs wheel bolts.
【 6x5.5 Wheel Spacer Adapter FITMENTS】 6x5.5 to 6x5.5 Wheel Spacers Adapters fit for QX56 2004-2010 for Frontier 1998-2004 for Armada 2005-2017 for QX4 1997-2003 for Xterra 2000-2004 for Titan 2004-2017.
【STRONG & DURABLE Spacers Adapters 】 6 Lug Wheel spacers made with hot forged aircraft grade aluminum with strength to weight ratio exceeding steel. Meanwhile Forged heat-treated and hardened ISO/DIN 10.17 studs deliver strength.Straight knurled edges for improved grip during install.
【 2 inch Wheel Spacers BENEFITS】Wheel Spacers pieces allow more outboard placement of wheels to Increases the track width of your vehicle for an aggressive look that reduces gap between tire and fender, and more improved cornering and greater stability.
【EASY INSTALL】Precision Engineered and Model Specific for Perfect Fit....

Check Stock

ECCPP 4X 1.5 inch Wheel Spacers Adapters hub Centric 6x5.5 to 6x5.5 6x139.7mm to 6x139.7mm 14x1.5 Studs for 1999-2018 for Silverado 1500 Wheel Spacers 1995-2018 for Tahoe Wheel Spacers

【1.5 INCH WHEEL SPACERS HUB CENTRIC SPECIFICATIONS】4PCS Wheel Spacers 6 LUG: 6x5.5" (6x139.7mm) bolt pattern,78.1mm(3.07") Center bore,M14x1.5 thread pitch,1.5"(38mm) thick..
【6x139.7 WHEEL SPACERS Compatibility】Fit for 1999-2018 for Silverado 1500|1995-2018 for Tahoe|2007-2013 for Avalanche|2000-2012 for Suburban 1500|2002-2006 for Avalanche 1500.
【6x5.5 hub centric wheel spacers About the thickness】Please confirm about the Fender Gap,this decides the thickness range should be fitted. For a car without leveling lifting,to avoid rubbing,the thickness of wheel adapters should be less than the fender gap. For example,if your fender gap is 1.5",It is better to choose spacers which is less than 1.5" thick.
【HUB CENTRIC WHEEL SPACERS 6X5.5 TO 6X5.5 Benefits】The spacers 6x5.5 Widen your vehicle wheels base by allowing for a more aggressive stance, rubbing easily and instantly,greatly improve the vehicle stability!.
【6x139.7mm wheel spacers hub centric 】The body of 6 lug wheel spacers adapters is made of Forged aluminum. Meanwhile Forged heat-treated and hardened ISO/DIN 10.9 studs deliver strength.

Check Stock

ECCPP 4x 5 lug Hubcentric Wheel Spacer Adapters 25mm 5x114.3 to 5x114.3mm 5x4.5 to 5x4.5 64.1mm compatible with for RL for CL for RSX for TSX for TL for Element with 12x1.5 Studs

5x114.3 WHEEL SPACERS FITMENTSPlease ensure that the installation torque range does not exceed 80 ft/lbs.
Replacement fits for 1996-2004 for Acura RL 2002-2006 for Acura RSX.
5x4.5 WHEEL SPACERS PARAMETERThickness:1" or 25mm.
Bolt Pattern:5x4.5 to 5x4.5 or 5x114.3mm to 5x114.3mm.
WHEEL SPACERS 5x4.5 to 5x4.5 SAFETYThe Wheel spacers are made from the best true T-6 billet aluminum,to ensure the highest level of performance and durability for your vehicles.The studs of our Wheel spacers are grade 10.9,heat treated and hardened heavy duty studs for safety..
5x114.3 WHEEL SPACERS ADVANTAGEWheel Spacers widen your vehicle wheels base by allowing for a more aggressive stance,eliminate rubbing easily and instantly,greatly improve the vehicle stability..
5 LUG HUBCENTRIC WHEEL SPACERS 25MM ATTENTIONPlease check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchasing.If you don't make sure whether this Wheel Spacers fit for your vehicles,please message us.

Check Stock

TailorShape Bermuda Complete Skateboard | 32 X8 Professional Street Skateboard | Multicolored Street Art Canadian Maple Wood Board for Boys Girls Teens Beginners Kids and Adults

...11 chrome steel bearings with built-in spacers for everyday skating..
INDY STYLE ALUMINUM TRUCKS AND SHR BUSHINGS – 5.5’’ lightweight aluminum trucks of the finest quality have been used in the Bermuda to act as reinforcement when making tricks. The 90A SHR 80% rebound bushings ensures quick response and good centering..
GET A BOARD SPECIFICALLY DESIGNED FOR TRICKS – use this board to show off new tricks with its ease of use and functionality, flexibility, and durability. Max recommended weight: 300lb (135kg)..
INCLUDES A FREE T-TOOL - All TailorShape skateboards come with a multifunction t-tool wrench that fits all the screws on the skateboard! The board comes fully assembled but we recommend using the tool to adjust the trucks and wheels to the desired riding style. The wrench is a 10$ value..

Check Stock

General Tools 806 Jiffy Centering Punch, Silver

The Jiffy Centering Punch makes centering screw holes for hinges, locks, brackets and other countersunk hardware.
The tool's tapered end fits inside the hinge or bracket screw hole for automatic centering.
For quickly starting screw holes when attaching countersunk hardware such as hinges, hasps, hangers and drawer pulls.
Countersunk end ensures starting hole is centered in hardware screw hole.
Hardened steel pin for repeated punching and makes easily identifiable marks in wood surfaces.
Length: 2-1/2" (68mm). Body diameter: 3/8" (10mm).

Check Stock