ReviewsCentrifugal Coupled Pumps

InnovaPharm NOVAPUMP (Unflavored) 320 Grams

  • NITRIC OXIDE PRE WORKOUT | With a massive 8,000mg dose of Citrulline Malate coupled with SUPER SPINACH, one can expect skin tearing muscle pumps. CAFFEINE FREE & STACKABLE | NOVAPUMP is void of caffeine or any stimulants, making it perfectly stackable with any pre workout powder on the market. SUPER SPINACH | NOVAPUMP contains the clinical dose of SUPER SPINACH, which was recently shown in a university study to substantially increase endurance and power output during exercise, while promoting bl.
  • CAFFEINE FREE & STACKABLE | NOVAPUMP is void of caffeine or any stimulants, making it perfectly stackable with any pre workout powder on the market..
  • SUPER SPINACH | NOVAPUMP contains the clinical dose of SUPER SPINACH, which was recently shown in a university study to substantially increase endurance and power output during exercise, while promoting blood flow and circulation..
  • PROMOTE MUSCLE GROWTH | A more hydrated and "full" muscle is a healthier muscle, and with improved blood flow for improved nutrient delivery, your muscle are like a sponge to whatever nutrients you throw at it..
Check Stock

Globe Scientific GCC-MP-Swing, Swing-Out Rotor for GCC-MP Series Multi-Purpose Clinical Centrifuges, Aluminum Alloy, 4-Place for Buckets

  • Product Introduction:This electric motor centrifugal switch is 100% brand new and high quality..
  • Application:This centrifugal switch fits for 90.100 electric motor of YC/YL series..
  • 19mm Bore: The bore diameter of stand is 19mm..
  • Safe to Use:This electric motor centrifugal switch can help start electric motor safely..
  • Quality Material:This electric motor centrifugal switch is made of good quality material, durable for long time use..
Check Stock

Electric Centrifuge Machine Lab Centrifuge 6x20ml 4000rpm for Serum/Fat Separator PRF Extractor 110V US Plug

  • [PARAMETERS] Capacity: 6x20ml, speed: 0-4000rpm, relative centrifugal force: 1920xg, voltage: 110V, timing: 0-999min..
  • [TIMING&SPEED CONTROL] 0-4000rpm speed is adjustable, 0-999min timing, please adjust the time and speed according to your needs..
  • [LCD DISPLAY] Real-time display of speed and time on the digital display screen, you can check the remaining time during work..
  • [TRANSPARENT COVER] The transparent cover is convenient for observing the centrifugal effect, and has the function of opening the cover. After the cover is opened, the machine will stop rotating immediately..
  • [NOTE] The test tube capacity of this centrifuge is 20ml, and the actual centrifugal capacity should not exceed 80% of the test tube capacity. This is the best centrifugal effect..
Check Stock

Centrifugal Blower Fan Air Mover 1354 CFM Centrifugal Extractor Fan Blower 300W 1450 RPM Industrial High Velocity Ventilation Fan Air Exhaust Vent Cooling Radial Centrifugal Flow Blower

  • 【HIGH QUALITY CENTRIFUGAL FAN】PP250 centrifugal blower fan, is made of high quality PP (Polypropylene) material, non-toxic and tasteless, environmentally friendly and healthy. Corrosion resistance, wear resistance, high temperature resistance, durable and long-lasting, very suitable for laboratory ventilation cabinets..
  • 【HIGH WORKING EFFICIENCY】Working method of centrifugal, 1354 CFM air flow, 260 Pa hydrostatic pressure, 40 db noise, with suction and low noise. Reliable and durable, suitable for long-term ventilation work..
  • 【LARGE SUCTION & LOW NOISE】With large suction and low noise, this ventilator exhaust fan is very suitable for chemical gas anti-corrosion fans such as laboratory fume hoods, ventilation medicine cabinets, medicine cabinets, and chemical cabinets..
  • 【HIGH-OUTPUT BLOWER FAN】High-output fan design, large suction, provides a large capacity of 134 cubic meters per minute. Constructed by sturdy shell, compact design, small size, easy to carry, easy to use and store..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 10 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 12 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
  • Go Kart Clutch kit：Clutch and bolt & hexagonal wrench.
Check Stock

Desktop Electric Lab Laboratory Centrifuge Machine Lab Medical Practice w/Timer and Speed Control,Low Speed,Capacity 20 ML x 6-110v,4000 RPMby CALU LUKY

  • Centrifuge Machine -Time Rang:0~60min or without limit. Maximum relative Centrifugal force: 1790×g. Electric current:AC110V 60 HZ. Capacity:20ml×6.
  • Maximum speed: 4000r/min.6 Tubes are provided in this lab centrifuge, the centrifugal capacity is 20ml per tube, benefitting your workflow efficiency.
  • Widely Used:Table-centrifugal machines are widely used in the laboratory or produce department for organisms、 medical、 chemistry etc. Our lower....
  • Lab Benchtop Centrifuges:Please insert the tubes into the machine symmetrically, or will not work properly in an asymmetric state.It has 3 adjustable....
  • Easy to Install:Centrifugal machine is easy to use with its clear control panel for controlling the speed and time. bench-top centrifuge is equipped....
Check Stock

Electric Centrifuge Machine Lab Centrifuge 8x20ml 4000rpm for Serum/Fat Separator PRP Extractor 110V US Plug

  • [PARAMETERS] Capacity: 8x20ml, speed: 0-4000rpm, relative centrifugal force: 1920xg, voltage: 110V, timing: 0-999min.The test tube capacity of this centrifuge is 20ml, and the actual centrifugal capacity should not exceed 80% of the test tube capacity. This is the best centrifugal effect..
  • [TIMING&SPEED CONTROL] 0-4000rpm speed is adjustable, 0-999min timing, please adjust the time and speed according to your needs..
  • [LCD DISPLAY] Real-time display of speed and time on the digital display screen, you can check the remaining time during work..
  • [TRANSPARENT COVER] The transparent cover is convenient for observing the centrifugal effect, and has the function of opening the cover. After the cover is opened, the machine will stop rotating immediately..
  • [Satisfactory service] We provide a one-year warranty period, if you have any questions after receiving the goods, please contact us directly. We will give you a satisfactory answer within 24h..
Check Stock

QWORK Centrifugal Casting Crucible, 2 Pack Zirconia Casting Cup Machine Crucible Hooded for Dental Lab, Over 200 Times of Use

  • High quality: QWORK Casting Cup made of fused silica and high-quality zirconia..
  • High efficiency: Can be used more than 200 times by centrifugal casting machine, can be used about 20 times by high-frequency casting machine..
  • Note: It is recommended that the melting temperature is not higher than 1371 degrees Celsius or 2500 degrees Fahrenheit..
  • Widely used: Suitable for replacing the ceramic crucible of the centrifugal casting machine..
  • Package include: 2 Pack Centrifugal Casting Crucible..
Check Stock

L20-202Y 20mm Electric Motor Centrifugal Switch, Electric Clutch Controller Parts 3000RPM

  • Motor centrifugal switch: Shaft diameter 20mm, 3000RPM..
  • Advantages: Helps to start the motor safely and quickly. Easy to install and easy to use..
  • Model: The number behind the model L of the centrifugal switch is the size of the large round hole and the size of the motor shaft. For example, L20-202Y, the shaft diameter is 20mm..
  • The difference: The centrifugal switch is divided into a centrifuge and a bottom plate, and the bottom plate is mainly at a different contact position..
  • Friendly Tips: There are two levels and four levels. The two levels are 3000RPM, the numbers are 2.
  • the fourth level is 1500RPM, and the number ends with 4..
Check Stock

Electric Pto Clutch Repl Grasshopper 606242

  • Fitment:Grasshopper 388767, 388769, 606242, 388771, 388768, 604183, 71379, Kees 7058295, Prime 7-06270, 7-06279, Massey Ferguson 58925, 7058925, McCulloch 58925, 7058925, Craftsman 35520.
  • Fitment: Ariens 00574200, 574200, 09407700, 990003, 990004, 990300, 09049000, Gravely 09049000, Warner 5218-147, 5218-214, 5218-257, 5218-26, 5218-58, 5218-67, 5218-1, 5218-33, 5218-238,.
  • Fitment: Toro Z320 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z325 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z350 2000 (SN 200000001-200999999) 2001 (SN 210000001-210999999), Z355.
  • Its working is totally depends upon the centrifugal force created by the driving member (engine or motor). The centrifugal force is used to engage the clutch with driven shaft. As the engine starts rotating, it produces a centrifugal force which makes the sliding shoes to move outward. Since the drum is connected to the driven shaft, so the power is transmitted from the engine shaft to the transmission shaft and finally to the load..
  • To ensure this part goes with your machine you should always go by the model number and serial number, which is normally found under the seat of your riding mower..
Check Stock