ReviewsCentrifugal Fan Impeller

Ace Hydraulic Driven Centrifugal Pump 1.25" Suction x 1" Discharge USA Made Farmer Bob's Parts FMC-HYD-204

Suction 1-1/4" Discharge 1" 204 motor requires 4 GPM hydraulic flow on PC Closed and Open Center Systems Integral Needle Valve bypasses up to 9 GPM on Open Center Systems Standard with Viton Carbon/Ceramic Mechanical Seal Chemical Resistant Valox Impeller Cast Iron Pump Stainless Steel Shaft and Wear Ring Maximum Gallons Per Minute - 85 GPM Maximum PSI - 100 PSI Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period..

Check Stock

iPower 6 Inch 240 CFM Inline Duct Fan with Low Noise, Booster Exhaust for HVAC Ventilation in Grow Tent, Basements, Bathrooms and Kitchens

Efficient but quiet: Lead to great effects with a diameter of 6 inches, speed of 2950 RPM and 240 CFM air flow. A less than 48 dB noise level does not have any harm and will not disturb your work..
Easy to install: Portable, lightweight and easy to install in areas with little available space. Sufficient 5.5' grounded power cord inside is convenient to use..
Durable: Superior balanced centrifugal impeller and high strength housing for long service life. The motor features a permanently lubricated bearing that operates quietly and requires no maintenance..
Wide application: Exhaust air for HVAC to remove heats & odors or intake fresh air, used in grow tents, kitchens, bathrooms, basements, attics, garage, workshops etc..
Power Cord: 5.5FT. Max operating temp of motor is 130℃ / 266℉.
Max ambient temp is 60℃ / 140℉. Note: Please turn the fan off immediately if the blades get stuck by other objects and turn on after clean..

Check Stock

iPower 4 Inch Booster Fan 90 CFM with Low Noise, Inline Duct Exhaust HVAC Vent Blower in Grow Tent, Basements, Bathrooms and Kitchens, 2 Pack

Efficient with low noise: Lead to great effects with a diameter of 4 inches, speed of 3200 RPM and 90 CFM air flow. A less than 54 dB noise level does not have any harm and will not disturb your work..
High safety and easy to install: With insulating coating, high safety factor. Portable, lightweight and easy to install. Sufficient 4.9' grounded power cord inside is convenient to use..
Durable: Superior balanced centrifugal impeller and high strength housing for long service life. The motor features a permanently lubricated bearing that operates quietly and requires no maintenance..
Wide application: Exhaust air for HVAC to remove heats & odors or intake fresh air, used in grow tents, kitchens, bathrooms, basements, attics, garage, workshops etc..
Max ambient temp is 60℃ / 140℉. Note: Please turn the fan off immediately if the blades get stuck by other objects and turn on after clean..

Check Stock

Armstrong 174031-013 1/12 Horsepower S-25 BF In Line Circulator Pump

Flange sizes (NPT): 3/4, 1, 1-1/4, 1-1/2.

Check Stock

iPower 6 Inch Inline Booster Fan 174 CFM with Low Noise, Duct Exhaust HVAC Vent Blower in Grow Tent, Basements, Bathrooms and Kitchens, Silver

Efficient with low noise: Lead to great effects with a diameter of 6 inches, speed of 2800 RPM and 174 CFM air flow. A less than 60.7 dB noise level does not have any harm and will not disturb your work..
High safety and easy to install: With insulating coating, high safety factor. Portable, lightweight and easy to install. Sufficient 4.9' grounded power cord inside is convenient to use..
Durable: Superior balanced centrifugal impeller and high strength housing for long service life. The motor features a permanently lubricated bearing that operates quietly and requires no maintenance..
Wide application: Exhaust air for HVAC to remove heats & odors or intake fresh air, used in grow tents, kitchens, bathrooms, basements, attics, garage, workshops etc..
Max operating temp of motor is 130℃ / 266℉. Max ambient temp is 60℃ / 140℉. Note: Please turn the fan off immediately if the blades get stuck by other objects and turn on after clean.o turn off the power immediately, clean it up, turn the power back on when handled properly..

Check Stock

Lasko Wind Machine 20 In.

...eets Portable: Dreo's all-in-one airflow system combines with a supercharged electric motor, delivering high-speed, brisk cool. This 36-inch compact tower fan exhilarates every inch of air in your living space moving air up to 24ft/s..
Cut Out the Noise: Enjoy all-day serenity and comfort, enabled by its algorithmic impeller design and the magical Conada effect. Go in unison with the display auto off, and auto mute in Sleep mode with an 8h timer, and soothing airflow, all precisely engineered to allow for a restful sleep whenever you need it..
Easy to Clean & Safe to Use: Removable rear grille and the impeller wheel make cleaning more accessible. Designed with fingertip pinch-proof grills, a fused plug and built-in circuit protection, this ETL-listed bladeless fan ensures safety is always prioritized..
Far and Vast: 90° oscillation and calibrated airflow path allow this oscillating fan to cover more areas in the room. Combine with your cooling air conditioner and cut the extra cooling costs during hot days..
Easy to Clean & Safe to Use: Removable rear grille and impeller wheel make cleaning more accessible. Designed with fingertip pinch-proof grills, a fused plug and built-in circuit protection, this ETL-listed tower fan ensures safety is always priorit....

Check Stock

FUFU Cooling Fans Misting Fan Metal Oscillating Commercial High-Velocity Outdoor Indoor Mist Fan Black Industrial Cool, Free Tax, Delivered Within 8-15 Days 3 Speed 43L Water Tank 3 Sizes 3 Speed Set

...use this cool mist fan is outside on patios and backyards, as well as during activities, it’s much more versatile as well. You can use it to mist tropical plants and give them the high humidity environment they need to survive..
HIGH PERFORMANCE, ELEGANT OUTDOOR MISTING FAN - The FAN is a high performance portable centrifugal mist fan offering numerous product advantages. Our premium oscillating misting fan is constructed using high quality materials that not only look good but are highly functional too..
3-SPEED SETTING - Not restricted to summers, our portable cooling fan is fit to use at any season against dryness and humidity. It is constructed with 3-speed settings, allowing you to set the fan according to the external temperature needs. It can be used on balconies, lawn, backyard and any other place where your air conditioner won't go..
Centrifugal atomization system , spray evenly , rapid cooling 3-12°C.
The fan automatically moves from side to side , evenly distributing cool air around the whole room.
The universal wheel design makes it easier to move freely.
OVERLOAD PROTECTION-The fan is specially built for outdoors and hot areas, its centrifugal mist design eliminates clogging nozzles without....

Check Stock

Powerful Industrial Exhaust and Ventilation Fan (14 Inch)

HIGH-CAPACITY FAN: Ventilation fan operates on a single, impact-resistant centrifugal blower wheel with 109 CFM, 0.9 Sones, and 120V for a powerful and effective performance.
HEAVY-DUTY: Housing is constructed of 20-gauge galvanized steel and features a 6" round metal duct connector to provide long-lasting use.
CUSTOMIZATION: Fan ducts horizontally, vertically, or in-line with a separate adapter for your convenience.
EFFECTIVE: Motors are permanently lubricated to provide continuous and quiet operation.
VERSATILE: Install fan in ceiling or wall -wherever it's needed most!.
109 CFM 0.9 Sones (AMCA), 120V, 1.1 amps.
White Polymer Grille with 6-Inch round duct connector.
Low profile, white polymer or painted white enamel steel grille.
Single, impact-resistant centrifugal blower wheel.
20 gauge galvanized steel housing and can be ducted horizontally or vertically - in-line ducting available with separate adapter.

Check Stock

Broan-Nutone L400 High Capacity Ventilator Fan, Commercial Exhaust Fan, 2.3 Sones, 434 CFM

HIGH-CAPACITY FAN: Ventilation fan operates on two impact-resistant centrifugal blower wheels at 434 CFM, 2.3 Sones, and 120V for a powerful and effective performance.
HEAVY-DUTY: Features a sturdy, 4.5" x 18.5" metal duct connector to provide long-lasting use.
CUSTOMIZATION: Fan ducts horizontally, vertically, or in-line with a separate adapter for your convenience.
EFFECTIVE: Automatic backdraft dampers and permanently lubricated motors provide continuous and quiet operation.
VERSATILE: Install fan in ceiling or wall -wherever it's needed most! Not for use over tub or shower..
Two impact resistant centrifugal blower wheels and quiet automatic backdraft dampers.
Can be ducted horizontally or vertically.

Check Stock

200W 24V DC Submersible Solar Water Pump Portable Deep Well Pump Noiseless max Flow 16L/min Water Pump Lift 60m for Ship Boat Fish Ponds agricultural irrigation

【Main Parameter】Power: 200W, Voltage: 24V DC, Max flow: 16L/min , Max lift:40m, Outlet: 0.98'' (25mm), Pump diameter:77mm, Pump length:340mm..
【Premium Pump】Made of cast steel material, corrosion resistance, heat resistance, high temperature. Pure copper motor, cast steel chassis, safety insulation, strong power, DC diving, good mute effect..
【Cast Steel Impeller】Centrifugal impeller, more powerful, fast speed, effectively increase the head flow. It uses car power, energy saving and environmental protection..
【Environmental protection】This is a non-toxic, non-polluting, noiseless solar water pump. The pump has a built-in controller and is easy to install. It can connect the pump directly to the solar panel..
【Wide Application】Suitable for using in ships, fishing boats, fish ponds, agricultural irrigation and etc.High lift, large flow, small size, eas.

Check Stock

Ace Hydraulic Driven Centrifugal Pump 2" Suction x 1.5" Discharge USA Made Farmer Bob's Parts FMC-200-HYD-304

Max flow: 200 gpm Max pressure: 120 psi Port sizes: 2" FNPT Suction, 1-1/2" FNPT Discharge Pump material: Cast Iron Hydraulic motor: Requires 11 gpm hydraulic flow on closed and open systems Seal material: Viton Carbon/Ceramic (Optional Severe Duty Silicon Carbide available) Impeller material: Chemical Resistant Valox (Optional Cast Iron).

Check Stock