ReviewsCeramic Abrasive Cutting Wheel

Lamsion Rust Remover Wheel Remove Paint and Oxidation Poly Strip Wheel Disc Abrasive Angle Grinding Wheel (5Pack - 4" x 60#)

  • 【RUST REMOVAL WHEEL MATERIALS】: Black Diamond Cup Wheel - The black diamond material is a high-strength, high-wearing honeycomb soft abrasive tool formed by combining high-strength wear-resistant fiber mesh as a substrate and organically combining resin elastomer and high-quality corundum with a special process..
  • 【RUST REMOVER PAINT SIZE】: 4" x 60# (100*16mm) : Diameter 4",Thickness 3/5",Aperture 5/8", Maximum speed 12500 (R.P.M), Maximum speed 80, Abrasive grain size - black silicon carbide 46#.
  • 【SCOPE OF APPLICATION】: Wheel rust remover applies for sanding interface grinding, oil pipe burr removal, ceramic bottom polishing c1/2ar surface paint removal and so on. Easy to strip discs clean & remove paint, rust and oxidatio. 4" polycarbide abrasive wheel great for removing paint or rust from metal, but also on wood or fiberglass surfaces..
  • 【FITS ANGLE GRINER TOOL】: Our paint removal grinding wheel is designed for 4" with 5/8" arbor striper of various models angle grinders. DOES NOT FIT WAGNER PAINT EATER. Please make sure the arbor size and the outer diameter match y....
Check Stock

60 Pack Abrasive Wheels, Rocaris 1“ Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8\ Shank,Polishing bits

  • 【Abrasive Buffing Wheel Set】1“ abrasive wheel with 1/8" silver shank and 6 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, White 1000 Grit.
  • 【Size】Shanks are 1/8 inch, buffing wheels are 1 inch in diameter abrasive wheel.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

3M Silver Cut-Off Wheel 87461 T1 4 in x .035 in x 3/8 in Pack of 25

  • GREAT PERFORMANCE AND VALUE – Designed for high-performance metal cutting while helping reduce your abrasive spend.
  • DELIVERS A FAST, CONSISTENT CUT – Ceramic 3M Precision-Shaped Grain cuts exceptionally fast, helping increase productivity.
  • LONG LASTING – Exceptional durability for extended wheel life.
  • CUTS A VARIETY OF METALS – Designed to easily cut through carbon steel, stainless steel, mild steel, aerospace alloys and more.
  • USED IN MANY INDUSTRIES – Quickly cuts through metal pipes, tubes, flat sheets and more in shipbuilding, rail, and general metal fabrication.
Check Stock

100 Pack Abrasive Wheels, Rocaris 1\ (25mm) Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8\(3mm) Shank

  • 【Abrasive Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 5 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, each grit 20 pieces, total 100 pieces..
  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

3M Green Corps Flexible Grinding Wheel, T27, 7 in x 1/8 in x 7/8 in, 36, 20 per inner, 20 per case

  • 3M Ceramic Abrasive Grain is engineered for exceptional durability and cutting capability on carbon steel and tool steels to help increase productivity.
  • Durable ceramic grain belt lasts longer than aluminum oxide belts, producing more parts per belt and requiring fewer belt changes.
  • 3M Ceramic Abrasive Grain cuts fast, helping to increase productivity and throughput.
  • Smooth running wheels produce less vibration than conventional grinding wheels.
  • Stands up to medium to high pressure production environments, contributing to longer service life.
Check Stock

JIUNENG 1 inch Abrasive Wheel Buffing Polishing Wheel Set with 1/8inch Shank for Rotary Tool 80 Grit (25mm) 40Pcs

  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1"or1-1/2'' in diameter, 25 mm or 38 mm abrasive wheel.
  • 【Abrasive Buffing Wheel Set】25 mm/38mm abrasive wheel with 3 mm silver shank and 4 different grits, Brown 80Grit, Green 150Grit, Red 240Grit, Black 300Grit..
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

PRETEC Grinding & Cutting Wheels 4 1/2 inch Set,Angle Grinder Wheel Set,Cut Off Wheels 20pcs,Grinding Wheel 3pcs,4.5” Flap Discs 3pcs for Angle Grinder for Cutting Grinding

  • 【Grinding Wheel Set】4-1/2 inch angle grinder wheel set consisted with 3 kinds of grinder discs: 20 pcs cutting wheel,3 pcs grinding wheel,3 pcs 80 Grid flap disc.Also with a sturdy carrying case for holding 4.5”cut off wheel for metal..
  • 【Cutting Wheel】20PCS cut off wheels 4 1/2 inch has passed the CE&ISO certification, built for a more robust and safety cut off wheels.Fast burr free cutting with minimal material loss, Will not splash and cause injury..
  • 【Grinding Wheel:】3 pcs premium 4-1/2 “* 1/4 “* 7/8 “Grinding Disc for metal and stainless steel, T27 bevel type, A24T Aluminum Oxide Grains for Aggressive Grinding and High Stock Removal. Operating up to 13,000 RPM and 80M/S. Meet almost all your general polishing requirements..
  • 【Flap Disc: 】3 pcs flap discs, Constructed of industrial grade premium zirconia. Durable,good abrasion resistance,and anti-clogging.4.5″ * 7/8 inch arbor size flap disc is compatible with most air and electric angle grinders..
  • 【Long Lasting Discs】Our disc is made of iridium-plated white corundum, so our cut-off wheel has 2 times the cutting life of a normal cutting wheel. These cutting discs are made by a special process of alumina abrasive to ensure extra toughness, sharpness, and durability..
Check Stock

Shark Industries PN-26-6 Die Grinder Cut-Off Wheels - 6 Pack, 3-Inch x 1/32 x 3/8 Shark Type-1 Double-Reinforced Thin Wheels, 54 Grit, Maximum RPM 25,000 (6 Cutting Discs)

  • Double-Reinforced Cutting Wheel - Weve double-reinforced our abrasive cut-off wheels with fiberglass to provide added durability and longevity.
  • Made in USA Cut-Off Wheels - You can trust the materials and the manufacturing process used for our abrasive cutting wheels, as they are made in the United States.
  • Perfect for cutting carbon steel, cast iron and general-purpose metal.
  • Made for Aggressive, High-Speed Cutting - Our wheel can spin at a maximum speed up to 25,000 revolutions per minute. For safety, be sure to use with a guard..
  • 6-Pack of Wheels - This kit has six wheels, so youll always have plenty of cut-off wheels on hand to finish the job and to start the next one!.
Check Stock

Cut Off Wheels 4-1/2 ,PRETEC 50+5 Pack Metal Cutting Wheel,Thin 4.5” Metal & Stainless Steel Fast Cutting Discs for Angle Grinder - 7/8 Arbor Hole

  • ...undum grain that provides high hardness, durability and abrasion resistance,extend die grinder cut off wheel the service life..
  • 【Sharp & Clean Cutting】Cutting discs 0.04 inch ultra thin design for fast burr free and stable cutting. Make fast, clean cuts in steel, stainless and other ferrous metals with these abrasive cut-off wheels. Promot the heat dissipation of the cutting blade during work, avoid metal thermal burns. Performance with minimal material loss, make the cutting project more precise and efficient..
  • 【Professional Cutting Wheel】PRETEC Cutting wheels obtained CE,ISO certification.Help you better cut stainless steel, aluminum alloy, cast iron, carbon steel and general-purpose metal..
  • 【 Multiple Ueses】Cut off wheels 4 1/2 inch are designed for cutting steel, iron, plastic,fiberglass,stainless steel including rebar, steel pipe, sheet metal, structural tubing..
Check Stock

3M Green Corps Flexible Grinding Wheel - Metal Grinding Wheel for Angle Grinder - Ceramic Grain - Type 27 - 4.5 x 1/8 x 7/8

  • 3M Ceramic Abrasive Grain is engineered for exceptional durability and cutting capability on carbon steel and tool steels to help increase productivity.
  • Durable ceramic grain belt lasts longer than aluminum oxide belts, producing more parts per belt and requiring fewer belt changes.
  • 3M Ceramic Abrasive Grain cuts fast, helping to increase productivity and throughput.
  • Smooth running wheels produce less vibration than conventional grinding wheels.
  • Stands up to medium to high pressure production environments, contributing to longer service life.
Check Stock

3Pack 4.5" Diamond Metal Cutting Cut Off Wheels for 5000+ Cuts on Rebar, Steel, Iron and INOX, Angle Grinder Diamond Disc with 7/8" Arbor

  • DURABLE: 1 equals 100, OA-BRES diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels. Premium Vacuum brazing technology, brazing high quality diamond sand to the edge of the steel core, coated with abrasive materials on both sides, with high performance, durability and service life..
  • EFFECTIVE: Diamond sand specially designed for cutting various metals, ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal..
  • SAFETY:Solid steel wheel body greatly reduces risk of shatter and injury,diamond cutting edge is more convenient in usage than any abrasive wheel: fewer sparks, no dust, no smell, no overheating..
  • COMPATIBILITY:OA-BRES Professional brazed diamond saw blade compatiable with all brands of die grinders, angle grinder, cut off toos, compact saw with a 7/8" (22.22 mm) Arbor, and any other tools with a 7/8" arbor..
  • INCLUDE: 3 Pack 4.5-inch(115mm) diamond cut-off wheels set with a 7/8" ( 22.22 mm) Arbor, MAX RPM 13200..
Check Stock