ReviewsChamfer Cutters

3 Inch 150 Grit Flat Diamond Grinding Wheel Cutter Grinder Power Tool with 1/2' Bore for Grinding Hard Alloy, Glass, Tiles and Ceramics 78x12.7x10mm

  • Diameter x Bore Diameter x Thickness: 78mm/Approx.3" x12.7mm/Approx.1/2" x 10mm.
  • The diamond sand is evenly attached and wear-resistant, and it is not easy to drop sand.Good shape retention, strong grinding capacity, precision machining and high grinding efficiency..
  • Mainly used for grinding hard alloy, tungsten steel milling cutters, also can be used for glass, tiles, gems, ceramics, molds and other materials edge grinding and chamfer. And mainly applicable to small side grinding machine, grinder..
Check Stock

Arrows Before Bullets (8-Bit)

  • Chamfer Tool - keep your casings smooth and precise with the Hornady Case Prep Center 6-Blade Inside Diameter Chamfer Tool 050172. Designed to remove the burrs from the inside of a case mouth for consistent seating depth and reduces the chance of shaving material off when a bullet is seated.
  • Easy to Use Chamfering Tool Bit - after your cases are cleaned or if you are using new brass you will want to chamfer your cases for a clean smooth cut. This tool is threaded 8-32 so it will work in the Hornady Lock-N-Load Case Prep Trio, Case Prep Center or installed in the Universal Accessory Handle.
  • High Precision & Tough Durability - great chamfer tool bit for reloaders to help keep chamfers and deburrs square with the case mouth, eliminating slippage and reducing errors. Universal design works on all cases 17-45 cal.
  • Remove the Burrs Inside - when there are sharp edges on your brass after trimming, you need to cut them down with this brass chamfer tool. This tool easily removes burs from the case mouth allowing you to seat the bullet without having to worry about the bullet being damaged.
  • Hornady Case Prep Center - with many different options for case prep reloading, Hornady has an option for you. Find the right reloading tools and accessories to compl....
Check Stock

tallox 3 18 inch Chainsaw Chains .325 Inch Gauge .063 Inch Pitch 68 Drive Links Full Chisel fits Stihl

  • Fits these chainsaw models: Craftsman - 315.341300, 79240 & 79245 Pole Saw, 358.34550, CR2500A Cordless, 315.34131 Husqvarna - 436 LI, T536 LiXP, 536 LiXP Echo - CS-271, PPT-2620, PPT-2620H, PPF-2620 Ryobi - P540, P540A, P542, P543, P545, P546, P547, RY52003.
  • Designed for homeowners and landscapers, the low-vibration, low kickback Chamfer Chisel cutters offer outstanding performance. For chainsaw models that run 3/8 Inch low-profile pitch, .043 Inch (1.1 mm) gauge, 40 drive links.
  • Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments.
  • Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
  • Made in the U.S.A. - Limited Lifetime Warranty.
Check Stock

Frankford Arsenal Case Trim and Prep Center European 240V with Hardened Steel Chamfer Deburr Tool and Primer Pocket Scrapers for Reloading (European Plugs only)

  • SPECS: The HSS cutters stay sharp for thousands of rounds to make trimming quick and easy and the heavy-duty motor and drivetrain are optimized for durability and performance, 240 volt model is compatible with European electrical outlets.
  • INCLUDES: Inside chamfer tool, deburr tool, large and small primer pocket cleaning tools, and a trimmer with 3 collets and 6 shoulder bushings.
  • VERSATILE: Adjustable Collet System works with all shouldered cases from .17 Remington to .460 Weatherby.
  • EASE OF USE: An innovative case holder with adjustable collet and bushing system indexes the case shoulder and can be set to precisely trim brass to the exact desired length.
  • BE PREPARED: Built-in storage box holds extra tools and keeps everything ready and organized.
Check Stock

Oregon R52 AdvanceCut Chainsaw Chain for 14-Inch Bar -52 Drive Links – low-kickback chain fits Husqvarna, Echo, Ryobi and more

  • Fits many chainsaws, including Ego CS1401, Husqvarna 120i, Kobalt KCS 4040-06, Harbor Freight Lynxx 63287, 64715, 64478, Makita XCU03, XCU04, & XCU08, Ryobi RY40502, RY405100 & RY40511, Worx WG384.
  • Designed for homeowners and landscapers, the low-vibration, low kickback Chamfer Chisel cutters offer outstanding performance..
  • For chainsaw models that run 3/8 Inch low-profile pitch, .043 Inch (1.1 mm) gauge, 52 drive links. Made in the U.S.A. - Limited Lifetime Warranty.
  • Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments.
  • Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
Check Stock

Flex-Hone Tool CHC5818 Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8\ Diameter, 180 Grit (Pack of 1)

  • The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
  • Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
  • Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
  • Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.
Check Stock

Oregon R45 AdvanceCut Chainsaw Chain for 12-Inch Bar -45 Drive Links – low-kickback chain fits Dewalt, Craftsman, Makita and more

  • Fits these chainsaw models: Craftsman - 98023, CMCCS620, CMCCS620M1 Dewalt - DCCS620B, DCCS620P1 Makita - EA3200S, EA3200SRBB, EA3201S, EA3500S, EA3500SRDB, EA3501S, XCU02, XCU03, XCU04.
  • Designed for homeowners and landscapers, the low-vibration, low kickback Chamfer Chisel cutters offer outstanding performance. For chainsaw models that run 3/8 Inch low-profile pitch, .043 Inch (1.1 mm) gauge, 45 drive links.
  • Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments.
  • Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
  • Made in the U.S.A. - Limited Lifetime Warranty.
Check Stock

Oregon S52 AdvanceCut Chainsaw Chain for 14-Inch Bar – 52 Drive Links, Replacement Low-Kickback Chainsaw Blade, .050 Inch Gauge, 3/8 Inch Pitch, fits Poulan, Ryobi and more (S52X3)

  • Designed for homeowners and landscapers: 14 inch (35cm) pro-grade chainsaw chain, for models that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 52 drive links.
  • Fits these chainsaws with a 14-Inch bar: Craftsman S145, S1450, CMECS614, Echo CS310, Greenworks 12A Electric 20022 & 20232, 2020902ME, Homelite ZR43100, UT43104, Lynxx 14" 63287, 64715, Worx WG305.
  • Also fits: Harbor Freight Portland 14" saw, Husqvarna 240, 120i, 135, 120 Mark II, Makita UC4051A, XCU03, XCU04, Poulan PR4218, PL3314, Ryobi RY3714, RY40530, RY40503, Sun Joe SWJ699E, SWJ701E.
  • Precision, heat-treated semi-chisel chain: Cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments.
  • Made in the U.S.A. - Limited Lifetime Warranty. The low-vibration, low kickback Chamfer Chisel cutters offer outstanding performance. The ideal replacement 16in Ryobi chainsaw chain.
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

JIUNENG 2-in-1 Pneumatic Chamfer Tool,Mini Pneumatic Chamfering Machine Set,Portable Handheld Metal Edge Beveler with Replace Blades for Metal Deburring,45 Degree Arc

  • 【Easy Operation】: This 45-degree mini chamfering machine air tools has a new lightweight design, Two right-angle cutter heads and bearings have been installed on the machine, and two R-angle cutter heads are also equipped.Use the matching wrench to easily adjust the chamfer size and replace the blade.Can be easily operated with one hand..
  • 【Stable Speed】: This portable trimming chamfering tool can withstand high impact and high speed. The speed is increased and the chamfer is smoother with US 1/4 inch metal filter, free speed: 30000 RPM, air consumption 0.4/min..
  • 【Durable】: Pneumatic chamfering tool with 1-5 air intake adjustment, freely adjust the gear speed you need. The safety switch is used to prevent accidental touch to protect the user's safety at all times. Use the matching wrench to easily adjust the chamfer size and replace the blade.Can be easily operated with one hand..
  • 【Higher Efficiency】: The upgraded version of the metal beveling grinder, the new design adopts a new chrome-plated all-aluminum shell with high-quality bearings and blades for smoother deburring and chamfering..
  • 【Application】:JIUNENG's air beveler tool adopts the thinnest nut lock bearing at present, which can chamfer in the narrowest and shallowest space, an....
Check Stock

W.S Chamfer Gage Chamfering Ruler External Chamfered Inspection Tool Chamfering Gauge Stainless Steel 0-30mm

  • [FUNCTION]External Chamfering Tool can measure internal or external chanfer,Used in mechanical manufacturing, glass processing and other fields.
  • [MEASUIRING RANG]The External Chamfer Tool is in metric reading system, can measure range of 0-30mm, 0.5mm increments,+-025mm accuracy.
  • [PORTABLE]The Chamfer Tool total length of 65mm,width 26mm.
  • is designed to be lightweight and miniature, you can carry it to any workplace, such as workshop, laboratory, etc.
  • [MATERIAL]The welding inspection tool made of stainless steel is not easily bent and corroded, which can effectively extend the service life.
  • [EASY TO READ]All measuring scales of Chamfer gauge are engraved by laser on the gauge, which is not only clear and easy to read, but also can effectively reduce the wear in the use process.
  • And the back of the inspection tool has a sketch of how to use laser engraving.
Check Stock