ReviewsChamfer Milling

TAJIMA Drywall Chamfer - 180mm Sheetrock Trimming Tool with Adjustable 30 Degree Chamfer & Die-Cast Aluminum Base - TBK180-V30

  • 30 DEGREE CHAMFER TOOL - Fluorinated coating applied to aluminum base glides smoothly over materiel producing a flawless chamfered edge on drywall and....
  • SLIP RESISTANT ELASTOMER GRIP - Tajima's chamfer tool features an integrated, slip-resistant grip enhancing usability and safety.
  • DIE-CAST ALUMINUM BASE - Designed with a lightweight yet durable aluminum chassis, this Tajima tool will withstand the rigors of daily professional....
  • ADJUSTABLE CHAMFER - Tajima's chamfer tool features and adjustable chamfer edge ranging from 1mm - 4mm for flexibility on the job..
  • SUPERIOR JAPANESE CONSTRUCTION - Built with durability and quality in mind, Tajima's chamfer tools offer both thoughtful form and functionality that....
Check Stock

Inch External Chamfer Inspection Tool Chamfering Welding Gauge

  • [FUNCTION]External Chamfering Inspection Tool can measure internal or external chamfer.
  • [MEASUIRING RANG]The External Chamfer Tool is in metric reading system, can measure of 0-2in, 1/32in increments,+-1/64in accuracy.
  • [EASY TO READ]All measuring scales of Chamfer gauge are engraved by laser on the gauge, which is not only clear and easy to read, but also can effectively reduce the wear in the use process.
  • And the back of the inspection tool has a sketch of how to use laser engraving.
  • [MATERIAL]The Chamfer Tool made of stainless steel is not easily bent and corroded, which can effectively extend the service life.
  • [PORTABLE]The Chamfer Gauge is designed to be lightweight and miniature, you can carry it to any workplace, such as workshop, laboratory, etc.
Check Stock

uxcell Spiral Point Plug Threading Tap UNC 5/16-18 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Specifications: Thread size: UNC 5/16-18.
  • plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
Check Stock

uxcell Spiral Point Plug Threading Tap M4 x 0.7 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

  • plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
Check Stock

Wokesi M1.20.25 High-Speed Steel TiN Coated Metric Standard Thread Forming Taps Fluteless Taps Extrusion Taps Thread Drill Thread Milling Plug Chamfer Right hand (M1.20.25)

  • plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
Check Stock

Arrows Before Bullets (8-Bit)

  • Chamfer Tool - keep your casings smooth and precise with the Hornady Case Prep Center 6-Blade Inside Diameter Chamfer Tool 050172. Designed to remove the burrs from the inside of a case mouth for consistent seating depth and reduces the chance of shaving material off when a bullet is seated.
  • Easy to Use Chamfering Tool Bit - after your cases are cleaned or if you are using new brass you will want to chamfer your cases for a clean smooth cut. This tool is threaded 8-32 so it will work in the Hornady Lock-N-Load Case Prep Trio, Case Prep Center or installed in the Universal Accessory Handle.
  • High Precision & Tough Durability - great chamfer tool bit for reloaders to help keep chamfers and deburrs square with the case mouth, eliminating slippage and reducing errors. Universal design works on all cases 17-45 cal.
  • Remove the Burrs Inside - when there are sharp edges on your brass after trimming, you need to cut them down with this brass chamfer tool. This tool easily removes burs from the case mouth allowing you to seat the bullet without having to worry about the bullet being damaged.
  • Hornady Case Prep Center - with many different options for case prep reloading, Hornady has an option for you. Find the right reloading tools and accessories to compl....
Check Stock

Flex-Hone Tool CHC5818 Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8\ Diameter, 180 Grit (Pack of 1)

  • The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
  • Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
  • Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
  • Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.
Check Stock

ACCUCUT I2DMS 2 Flute 3/8 Carbide End Mill Multi-Function for Deburring Spotting Chamfering & Side Milling 90 Degree bits AlTiN Coating

  • ...ide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced..
  • Versatile Design: This end mill is designed for multiple purposes, such as chamfering, spotting, deburring and side milling. The chamfer degree is 45 per side..
  • 35° Helix: 2 flute and 35 degree helix design is ideal for roughing application because of its greater strength and capability to carry a larger chip load..
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8\/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools

  • PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
  • Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
  • Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
  • Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock