ReviewsChamfering Grinder

QWERF Cutting Disc, 4inch Ultra Thin Diamond Saw Blade Wheel for Angle Grinder Tiles Marble QWERF Cutting Processing (5 Pcs) Green,Jade

  • 【Advanced Materials】Using diamond high manganese steel matrix, new brazing process, upgraded and improved blade, more convenient, safer, and longer service life..
  • 【 Easy To Use】Designed for use with the Model 100 angle grinder, it is easy to install and use and can withstand the demands of dry/wet cutting and long continuous cuts..
  • 【Chip free Cutting】1mm ultra-thin saw blade does not damage the surface of the object, the grinding force is uniform, and the smoothness is good. With low grinding noise and less dust, minimal debris, and a top-notch cut!.
  • 【 Fast Precise Cuts】The diamond cutting blade is high-temperature resistant for reduced vibration and straighter, faster cuts. It is sharp and does not collapse, one piece is multi-purpose, the slit is small, and it is resistant to cutting and wear..
  • 【Scope of Application】For smooth cutting, chamfering, and grinding of glass, jade, crystal, wine bottles, ceramics, ceramic tiles, and other materials..
Check Stock

Benchmark Abrasives 7\ Zirconia Resin Fiber Sanding Discs for Grinding, Blending, Finishing, and Polishing 7/8\ Arbor, Stock Removal Angle Grinder Discs (25 Pack) - 60 Grit

  • Benchmark Abrasives 7" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Fafeicy Carbide Chamfer End Mill, 3 Flute 60° Milling Cutter V Groove Router Bit Tungsten Steel CNC Carving Polishing Router Bit, for Plywood, Soft Wood(D4*60°*50L), Milling Cutter

  • The chamfering mill is mainly used for the 60 ° chamfer or conical hole of the workpiece, and the edges and angles of each surface are champened..
  • This hard alloy chamfered milling cutter unique single-piece design makes debris generated during the cutting process without clogging the tool..
  • The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit..
  • This hard alloy chamfering cutter uses 3 flute design to complete the processing of tapered surfaces at a time, suitable for small cutting processing..
  • This chamfering cutter has a wide range of applications, suitable for hardwood, plywood, cork, oak, MDF and metal in HRC 55..
Check Stock

Benchmark Abrasives 5\ Zirconia Resin Fiber Sanding Discs for Grinding, Blending, Finishing, and Polishing 7/8\ Arbor, Stock Removal Angle Grinder Discs (25 Pack) - 36 Grit

  • Benchmark Abrasives 7" diameter and 7/8" arbor aluminum oxide resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of aluminum oxide grain that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Inverted Cone Shape Double Cut Rotary Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SN-4

  • Benchmark Abrasives SN-4 inverted cone burrs are great for rear-side chamfering, edge milling, and machining on hard-to-reach areas. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Glass Cutting Disc, 2022 New Super Thin Diamond Tile Blade Cutting Wheel 4inch Diamond Cutting Wheel Porcelain Saw for Smooth Cutting, Chambering, and Grinding of Glass, Jade, Crystal

  • Fast, Precise Cuts---The diamond cutting blade is high-temperature resistant for reduced vibration and straighter, faster cuts.which can help you cut faster and improve work efficiency! It is sharp and does not collapse, one piece is multi-purpose, the slit is small, and it is resistant to cutting and wear..
  • Chip-free Cutting---1mm thin saw blade does not damage the surface of the object, the grinding force is uniform, and the smoothness is good. With low grinding noise and less dust, minimal debris, and a top-notch cut! Is your Best Choice..
  • Material---Using diamond high manganese steel matrix, new brazing process, upgraded and improved blade, more convenient, safer, and longer service life..
  • Safe To Use---Designed for use with the Model 100 angle grinder, it is easy to install and use and can withstand the demands of dry/wet cutting and long continuous cuts..
  • Use Range---For smooth cutting, chamfering, and grinding of glass, jade, crystal, wine bottles, ceramics, ceramic tiles, and other materials..
  • 【Fast Shipping】 ✔✔ 10-14 Days003cbr003e003cbr003e.
Check Stock

Chamfer End Mill 3 Flute Chamfering Router Bit 90° Tungsten Steel CNC Polishing Carving Tool for Small Cutting Amount(D3*90°*50L)

  • 3 FLUTES: The chamfering knife is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
  • ONE-PIECE DESIGN: The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • EASY TO USE: The milling cutter bit dopts professional chamfer design, which can polish and engrave the workpiece without unloading..
  • STANDARD SIZE: The end mill chamfer bit has standard size and can be used as an aluminum‑copper milling cutter tool and an engraving milling cutter head..
  • APPLICATION: The chamfering tool is compact design, easy to carry and store, mainly used for 90° chamfering or taper hole processing on the workpiece..
Check Stock

RIMKOLO 107-Piece Bit Socket Set,1/4

  • DURABLE S2 Material: The bit socket is made of S2 alloy steel, which is strong and has good toughness, not easy to break.The chamfering design of the head increases the contact area, not easy to wear,more durable..
  • HEAT TREATMENT CR-V: The socket base is made of chrome vanadium steel with stronger hardness after heat treated and provides higher torque.The surface is mirror chrome plated,and the E-Torx Sockets with manganese phosphate coating are more anti-corrosive and anti-rust than Black oxide coating, extending the service life..
  • CHAMFERING DESIGN: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.Complies with ANSI standards..
  • COMPLETE ACCESSORIES: 107PCS high quality bit socket set,including 1/4", 3/8" and 1/2"drive Torx / extra long Torx / tamper proof Torx/hex / ball end hex SAE & metric bit set. Complete accessories to meet your needs..
  • EASY TO IDENTIFYWith a storage toolbox, easy to carry. Specifications are clearly printed on the tool box and socket, which is convenient for identification and sorting, saving you time..
Check Stock

Pipe and Tubing Inner-Outer Reamer 5/16-Inch to 2-1/8-Inch Diameter Stainless Steel/PVC Pipe Chamfer Anti-Slip Aluminum Alloy Shell Deburring Tool

  • STAINLESS STEEL TUBE REAMER: trimming, chamfering and deburring the outer wall.
  • trimming, chamfering and deburring the inner wall. At the same time, the outer wall is made of aluminum alloy with anti-skid pattern..
  • APPLICABLE OBJECTS: refrigeration copper pipes, stainless steel pipes, plumbing bellows, gasoline pipelines (aluminum pipes), galvanized pipes for water engineering, etc..
  • INNER/OUTER BLADE: Multi-blade alloy steel core design, triangular scraper-the triangular support of the blade is more powerful, convenient and fast..
  • MACHINABLE RANGE: 8-54mm (5/16"-2 1/8") inner diameter/outer diameter can be used, most household pipe diameters are covered, a reamer can solve all deburring and chamfering..
  • USAGE: Rotate and cut directly by hand, or use an electric drill with an adapter for processing..
Check Stock

38 Piece 5/16 Premium C6 Carbide Tipped Lathe Tool BIT Set BRAZED Single Point

  • 5/16" Premium C-6 carbide tips designed for long tool life in steel, alloys, etc..
  • 8 Pcs Style AR & AL- For general machining applications, turning, facing, boring and chamfering.
  • 6 Pcs Style E- 30-degree Lead angle for threading, chamfering, V-grooving, turning, facing & boring.
Check Stock

RIMKOLO 92-Piece Bit Socket Set,1/4',3/8'and 1/2' Drive Torx/Tamper Proof Torx/Hex SAE & Metric Bit Set,S2 Steel Bits

  • 【DURABLE S2 Material】: The bit socket is made of S2 alloy steel, which is strong and has good toughness, not easy to break.The chamfering design of the head increases the contact area, not easy to wear,more durable..
  • 【MIRROR POLISH】: Mirror chrome plated surface anti-rust and anti-corrosion. Extend service life..
  • 【CHAMFERING DESIGN】: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.Complies with ANSI standards..
  • 【Organizer Box】: The wrench set is equipped with a tool box for easy organization and storage，and easy to carry. Each wrench size is printed on the tool box for easy sorting..
  • 【COMPLETE ACCESSORIES】: 92PCS high quality bit socket set,including 1/4", 3/8" and 1/2"drive Torx / E-Torx / tamper proof Torx / Torx Plus / hex SAE & metric bit set. Complete accessories to meet your needs..
Check Stock