ReviewsChamfering Inserts

90° Chamfer End Mill 2 Flute Tungsten Steel Cemented Carbide Precise for Machine Tools(1075L)

  • Suitable for machine tools, milling machines..
  • This is 90 degrees 2 flutes chamfer end mill, precise and durable.
  • It is not only suitable for chamfering of ordinary machined parts, but also suitable for chamfering and deburring of accuracy difficult-to-chamfered parts..
  • Made of tungsten steel cemented carbide material, high hardness and long service life.
Check Stock

OCGIG 4pcs Countersink Chamfer Tool HSS 4241 Deburring Tool Set Metal Wood Drill Bits

  • Shank type: round, Sizes: 2-5mm,5-10mm, 10-15 mm, 15-20mm.
  • Ideal for cutting through metal, wood and plastic (hardness .
  • 90° angle on the point for sharp and precise countersinking, used for workpiece circular aperture chamfering or cone hole.
  • This bits should use the bench drill , it is easy to shake and it will affect the chamfering effect if you use the hand drill.
Check Stock

RCBS 90375 Trim Mate Case Prep Center 110V AC

  • Includes large and small primer pocket brushes, inside chamfering and outside deburring tools, medium and small case neck brushes and a packet of dry case neck lub.
  • Two stationary positions hold case neck brushes, and a cupped area holds dry case neck lube.
  • Includes large and small primer pocket brushes, inside chamfering and outside deburring tools, medium and small case neck brushes and a packet of dry case neck lube.
Check Stock

Buddhas Eyes (Essential Bar and Lounge Version)

  • Heavy-duty 6 amp motor of the electric hand planner provides smooth cutting in hard materials.
  • The hand planer has 16,500 rpm for smooth material removal.
  • Dual side dust extraction allows for extraction on either side of the tool.
  • Overmold depth knob with 10 positive steps allows for better planer control and multiple depth control settings.
  • 3 chamfering grooves allow for options for edge chamfering.
  • 11.5-inch cast aluminum shoe provides added control and better finish quality.
  • 5/64-inch depth of cut removes excess material in less time.
  • Overmold depth knob with 10 positive steps.
Check Stock

High Hardness 90° 2 Flute Tungsten Steel Cemented Carbide Durable Convenient Chamfer End Mill for Chamfering for Milling Machines(860L)

  • Made of tungsten steel cemented carbide material, high hardness and long service life.
  • Suitable for machine tools, milling machines..
  • This is 90 degrees 2 flutes chamfer end mill, precise and durable.
  • It is not only suitable for chamfering of ordinary machined parts, but also suitable for chamfering and deburring of accuracy difficult-to-chamfered parts..
Check Stock

Mudder 8 Pieces Edge Leather Beveler Cutting and Leather Edge Skiving DIY Craft Tool, Hand Leather Grooving Tool for Leather Crafting Work (1.5 mm, 1.2 mm, 1.0 mm, 0.8 mm)

  • The curved handle design helps you hold comfortably and makes the tool difficult to slide.
  • Practical tools: exquisite craftsmanship and pointed cutting edges help leather grooving tools easily create smooth and fine leather edges, ideal chamfering tools for both the experienced and novice who are interested in leather crafts.
  • Reasonable chamfering angle: these leather chamfering tools have pointed edges and suitable cutting angles, it is recommended to use a 30 to 45 degree angle so that you can easily trim the leather edges.
  • Versatile use: these leather trim bevelers are suitable for handbags, wallets, belts, purses and backpacks, etc., they are great gifts for people who like DIY.
Check Stock

5 PC 1/2'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

  • -5 pcs of TCMT3252 insert with chipbreaker, C6 Carbide grade for tool steel.
  • -Style included: AR - right hand, AL - left hand, BL - left hand 15 angle, BR - right hand 15 angle, style E - threading tool 30 angle.
  • -2 each Style A 0° for Turning, Facing, Boring, and Chamfering, 1 pc of left hand and 1 pc of right hand.
  • -2 each Style B 15° for Turning, Facing, Boring or any lead angle can be used , 1 pc of left hand and 1 pc of right hand.
  • -1 each Style E 30° for Turning, Facing, Boring, Chamfering, Threading and "V" Grooving.
Check Stock

OCGIG 4pcs Titanium Coated Countersink Chamfer Tool Deburring Tool Set Metal Wood Drill Bits Zhongbo Business

  • Material:HSS（High Speed Steel）4241, Titanium Coated.
  • Application:Ideal for cutting through metal,wood,plastic and thin iron plate (hardness .
  • Chamfer range:2-5mm, 5-10mm, 10-15mm, 15-20mm, Shank diameter: 6mm, 8mm, 10mm, 12mm, Head diameter: 10mm, 14mm, 21mm, 28mm.
  • 90 Degree angle on the point for sharp and precise countersinking, used for workpiece circular aperture chamfering or cone hole.
  • This bits should use the bench drill , it is easy to shake and it will affect the chamfering effect if you use the hand drill.
Check Stock

AIYOO 2 Pack Deburring External Chamfering Tool Deburring Tool for Metal High Speed Stainless Steel Bolt Deburring Tool Quickly Repairs Damaged Metal Drill Bit Triangle Shank

  • High-quality hard steel: The bolt deburring tools made of stainless steel, with high strength and hardness, durable, rust-proof, and corrosion-resistant, accompany you for a long time. And reusable, as sharp as ever, never dull..
  • Safe and efficient: High-strength, high-hardness deburring outer chamfering tools can easily scrape the outer edge of bolts, pipes, or bars to remove burrs. Quickly repair damaged bolts and tighten nuts in place without hurting hands, sparks, or burns.
  • Repair Damaged Threads: The chamfer tool can quickly repair damaged threads on steel bolts, creating a small 45° chamfer that does not alter the pitch and does not create a tip..
  • Simple operation: Attach the deburring outer chamfering tool to the end of the power drill, use the lowest speed on the drill bit, and apply light pressure to deburr. This tool simplifies the repair process, reduces repair time, and eliminates the need to replace expensive or hard-to-find hardware, making it a great addition to your industry and home..
  • Versatile: The deburring tool is suitable for applications including stainless and hardened steel, threaded rods, copper, brass, aluminum, plastic, and wood. And the copper pipe deburring tool is compact and portable, making it easy t....
Check Stock

Lacerta Files [Explicit]

  • PRODUCT SIZE -- 6" flat file total lenth 7.3inch width 0.6inch thickness 0.16inch.
  • QUALITY MATERIAL -- Each file tool is made of high carbon steel, high frequency quenching, high hardness, ensuring strength and durability for long-lasting use..
  • WIDE APPLICATION -- Our hand file can be used for metal deburring,wood rasp,processing hard wood, metal chamfering,sanding sticks for plastic models,tooth file for shaping,trimming and chamfering, polishing rough machining, heavy duty usage. Suitable for shaping metal, wood, plastic, plaster, wallboard, glass and etc. Ideal for wood carving, stone carving, remodeling, boat repair, pattern shops, foundries, etc..
  • EXQUISITE STRUCTURE -- The fine-grained texture double-cut tooth structure makes it a great multipurpose tool for professionals and DIYers alike.
  • AFTER-SALES SERVICE -- We aim to provide the best service to our customers. Just try it, and if you have any questions about our product, please feel free to contact us. We will refund or replace your purchase..
Check Stock

TOURACE Chamfer Planes for Woodworking, Professional Edge Corner Plane for Crisp and Clean Radiuses, Woodwork Hand Tool for Wood Trimming, Smoothing and Chamfering

  • 【Professional chamfering planer】---After the saw and planer have finished their work, the edges of the furniture are neat but sharp. Delicate carpentry work needs to consider more details. Sharp edges are easy to hurt people. Experienced cabinet manufacturers and furniture workers will use chamfering planes and radius to process the edges to soften the edges and give customers a more professional experience..
  • 【Sturdy, wear-resistant, sharp】---the shell is made of thick aluminum alloy material, after oxidation treatment, it is stronger and wear-resistant, not easy to wear or peel, and keep it as new. The blade is made of carbon steel, which is hard and sharp and can quickly remove wood chips. Hexagon nuts are used for assembly, which is easy to assemble and disassemble..
  • 【Perfect bottom surface, easy operation】---The bottom surface of the chamfering planer is a perfect 90 degree angle. You only need to turn the spiral of the board to adjust the blade length. After confirming the depth you need to plan, you can press the bottom surface against the edge of the wood product to work . The adjustment position design is very clever, just in the thumb position, very convenient..
  • 【Level meter】---the characteristic design, comes with a level meter....
Check Stock