ReviewsChamfering Tool Set

DAPIN deburring tool Deburring External Chamfering Tool Stainless Steel Deburring Drill Bit Tool Stainless Steel Deburring Extractor Fits Size 8-32 Bolt (Silver)

  • 【Upgrade material】 Our silver deburring external chamfering tool is made of high-quality HSS, which is sturdy, durable, shockproof and not easy to deform..
  • This deburring external chamfering tool can quickly repair damaged bolts and tighten nuts in place, saving you time and money. The tool simplifies the maintenance process, reduces maintenance time, eliminates the need to replace expensive or hard to find hardware, and maintains security at a level previously unattainable.
  • 【Very easy to use】easy to operate, only 1-2 minutes to complete the operation, use the lowest speed on the drill, and then gently apply pressure to deburr..
  • 【Wide range of uses】 applicable to stainless steel, hardened steel, low carbon steel, copper, brass, aluminum, glass fiber, wood, plastic..
  • 【Suitable size】8-32 bolts (. 164) to 3/4 ″ – 10 (. 750) – (4mm-19mm), simple design and compact size mean that tools can be easily put into the tool bag. Quickly put it into your hand drill and start repairing the workpiece.
Check Stock

Mudder 8 Pieces Edge Leather Beveler Cutting and Leather Edge Skiving DIY Craft Tool, Hand Leather Grooving Tool for Leather Crafting Work (1.5 mm, 1.2 mm, 1.0 mm, 0.8 mm)

  • The curved handle design helps you hold comfortably and makes the tool difficult to slide.
  • Practical tools: exquisite craftsmanship and pointed cutting edges help leather grooving tools easily create smooth and fine leather edges, ideal chamfering tools for both the experienced and novice who are interested in leather crafts.
  • Reasonable chamfering angle: these leather chamfering tools have pointed edges and suitable cutting angles, it is recommended to use a 30 to 45 degree angle so that you can easily trim the leather edges.
  • Versatile use: these leather trim bevelers are suitable for handbags, wallets, belts, purses and backpacks, etc., they are great gifts for people who like DIY.
Check Stock

Bestgle 4Pcs 6mm(1/4”) Shank Tungsten Carbide Rotary Cutting Burr Die Grinder Bit for DIY Woodworking, Metal Carving, Polishing, Engraving, Drilling, 150-160mm Length

  • Set of 4 Double Cut Solid Carbide Rotary Burr Set, Shank diameter: 6 mm(approach 1/4 inch), Cutting edge diameter: 7mm-10mm, Total length: 150-160 mm.
  • The service life of tungsten steel rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.
  • High performance on processing Copper, Aluminum, Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc. machining hardness can reach to HRC70.
  • Generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
  • Excellent for fine detail work,widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding,ect.
Check Stock

Copper Pipe Cutter Conduit Reamer PVC Pipe Reamer Pipe Reamer Tool Pipe Reamer,Inner Outer Reamer Stainless Steel Pipe Deburring Tool Chamfer Tool 1/4in 1 3/8in

  • 【Alloy Steel Core Design】: Multi-blade alloy steel core designed, both internal and external trimming chamfering and deburring..
  • 【Applicable To Hard Pipes】: Applicable to stainless steel and other hard pipes. This pipe reamer is a good tool for deburring or chamfering pipes. The quality of the pipe reamer is guaranteed..
  • 【Trimming Equipment】: Professional copper and aluminum pipe trimming devices..
  • 【For Various Occasions】: Can be used in a variety of work situations to meet your needs..
  • 【Practical】: Very compact, simple and practical tool, can easily solve the pipe burr problem..
Check Stock

Deburring External Chamfer Tool, Deburring Chamfering Drill Bit, Bolt Deburring Tool Stainless Steel, Remove Burr Tools Quick Release Hex Shank Fits 1/2″to 1-3/8″ (13mm-35mm)

  • ...anadium Steel hex shank , which has high strength and hardness for durability. Three Alloy cutter blades with strong cutting and repairing capabilities, allows burrs to be removed more cleanly and efficiently..
  • 【Improved Carbide Cutting Edge】Razor sharp, maximum efficiency and durability. This demurring external chamfering tool features carbide cutting edge that provides better performance and longevity than counterparts made of materials such as high speed steel..
  • 【Efficiently Safety Design】The hexagonal shank deburring tool can be tightly connected with the head drill, and it has sharp teeth inside, which can cut bolts safely and effectively, quickly repair damaged bolts and tighten nuts in place, without hurting hands and producing no sparks.
  • 【Operation simply】You can attach a deburring external chamfering tool to the end of a power drill and apply light pressure at the lowest speed to remove the burrs. You don’t need to look for replacement bolts, deburring tools repair damaged bolts and improve work efficiency, A good helper for home tools and factories.
  • 【Optimal Compatibility】Deburring external chamfer tool fits 1/8′ (3mm) to 3/4′ (19mm). Operate with sufficient lubrication and less than 500 RPM.Hex shank with quick release de....
Check Stock

Milling Cutter Bit Rotating Bit 6 Pieces Of 3-blade 90 Degree HSS Titanium Chamfering End Mill Cutter Counter Hole Deburring Cone Drill Set 6.3-20.5m Color HSS No Box

  • Material: It has the advantages of high hardness, wear resistance, good toughness and corrosion resistance. It also has stronger heat resistance, so it can maintain hardness even at high temperatures..
  • -The processed debris can be dropped more easily in the chamfering process, without affecting the work efficiency due to tool blockage..
  • -Suitable for workpieces with hardness lower than 25HRC, such as carbon steel, thin iron plate, insulating plate, PVC plate, wood board, etc. Titanium-coated models have higher hardness and longer service life.
  • -The blade can be ground: a more convenient maintenance method allows the tool to be ground without unloading..
  • -The automatic through hole chamfering knife can quickly chamfer both sides of the hole in a few seconds..
Check Stock

Fafeicy Pipe Reamer Stainless Steel Tube Deburr Chamfer Tube Remove Burr Tool 5/16inch - 2 1/8inch for Hard Pipes

  • Professional copper and aluminum tube trimming devices, multi-blade alloy steel core designed, taking both internal and external trimming chamfering....
  • Adapting to most working environment, can be used in a variety of working conditions, to meet your needs..
  • This pipe reamer is a great tool used for deburring or chamfering pipes. The quality of the pipe reamer is guaranteed..
  • The designed is clever, simple and practical.
  • the pipe reamer can effectively remove pipe burr..
  • APPLICATION: Suitable for hard pipes such as stainless steel, aluminum alloy shell non-slip..
Check Stock

OSCARBIDE 3/4\Self-Lock Block SLTBN19-5 with Adjustable Blade NCIH26-3,Blade NCIH26-4,Tin Coated 5 pcs GTN-3 Carbide Inserts and 5 pcs GTN-4 Inserts Parting Grooving Cut-Off Tool Set

  • Indexable Cutting Tool Holder Set include 1 pc 3/4" SLTBN19-5 Tool Block. 1 pc NCIH26-3 adjustable blade with 5 pcs GTN-3 carbide inserts. 1 pc NCIH26-4 with 5 pcs GTN-4 Inserts and 1 pcs wrench..
  • CTN-3 carbide inserts made of carbide Grade C6,0.12" width, TiN Coated. GTN-4 carbide inserts, made of Carbide Grade C6, 0.16" width, TiN Coated.
  • Suitable for varied Grooving,Cut-off,Parting-off,Chamfering.
  • This cut-off tool kit works with tool holders that can hold 3/4" AXA lathe turning bits,Equipped carbide inserts for Semi-finishing/roughing machining of steel and stainless steel.
Check Stock

Deburring External Chamfer Tool, with Carbide Blade, Deburring Chamfering Drill Bit, Remove Burr Tools Quick Release Hex Shank. Improved Durability and Sharpness. Fits 1/8" to 3/4".

  • Easy to use: This deburring external chamfering tool easily shaves down the outer edges of a flatted bolt. Simply attach it to a power drill, apply gentle pressure to the bolt head. Easy and quick fix for the nuts to be tightened..
  • Improved carbide cutting edge: Razor sharp, maximum efficiency and durability. This demurring external chamfering tool features carbide cutting edge that provides better performance and longevity than counterparts made of materials such as high speed steel..
  • Optimal compatibility: Hex shank with quick release design, fits most drills. Can be used to repair damaged/flatted bolts of virtually any material..
  • Size: Fits 1/8' (3mm) to 3/4' (19mm). Operate with sufficient lubrication and less than 500 RPM..
  • Our promise: Xpecial aims to provide the best professional tools and customer service for DIY enthusiasts and professionals. Should you have any questions or complaints please do not hesitate to get in touch and we will work it out for you..
Check Stock

20 PC 1/4 C2 & C6 Carbide-Tipped Tool BIT Set Single Point BRAZED Lathe KIT

  • Set contains 20 pcs 1/4" premium carbide tips- 10 pcs C2 grade (for cast iron, brass, and similar materials) and 10 pcs C6 grade (designed for long tool life in steel, alloys, & harder materials).
  • 2 Pcs C2 & C6 each- Style AR & AL- For general machining applications, turning, facing, boring and chamfering. Cuts to a square shoulder..
  • 2 Pcs each Style BR, 1 pc each Style BL- For general machine applications where a 15-degree lead angle is desired.
Check Stock

20 PC 1/2 C2 & C6 Carbide-Tipped Tool BIT Set Single Point BRAZED Lathe KIT

  • Set contains 20 pcs 1/2" premium carbide tips- 10 pcs C2 grade (for cast iron, brass, and similar materials) and 10 pcs C6 grade (designed for long tool life in steel, alloys, & harder materials).
  • 2 Pcs C2 & C6 each- Style AR & AL- For general machining applications, turning, facing, boring and chamfering. Cuts to a square shoulder..
  • 2 Pcs each Style BR, 1 pc each Style BL- For general machine applications where a 15-degree lead angle is desired.
Check Stock