ReviewsCheck Valve Manufacturer

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • Professional Factory - We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • High Capacity and Safe First - You could add more material: Citric acid 400g + baking soda 400 + water 600g. The capacity is twice that of an ordinary 2L bottle and half of 4L! An automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • Refine The Bubbles - Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • Low Cost - You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • Complete Accessories - steel bottle, Stainless steel pressure reducing....
Check Stock

GAS Air Compressor Pilot check valve unloader valve combo 145-175 NG7

  • 【Versatile】This 3-Port Brass Female Threaded Air Compressor Check Valve excellent replacement for the old or broken check valve of your air compressor.
  • 【Easy to install】Easy to install with the thread connecting ends, the three male thread connectors are respectively for tube connecting, air pressure tank and compressor piston pump.
  • 【Package Content】 1 x Air Compressor Check Valve.
  • 10mm Female Thread Tube Connector Air Compressor Check Valve, Male Thread : 16mm Hex Head Size : 18mm.
  • 【After-sale Service】Each Compressor Check Valve is quality checked, we provide 30-day money back service or exchange for customers, just feel Free to contact us if you have any problem with the product, we will solve for you within 12 Hours.
Check Stock

Aquarium CO2 Check Valve, Stainless Steel Needle Check Valve Bubble Counter Aquariums System CO2 Regulator Fish Tank Accessory(Single Head Micro metering Valve Bubble Counter)

  • Stainless Steel Needle Micro-metering Valve—This aquarium CO2 check valve adopts high quality stainless steel needle micro-metering valve with high precision, that is easy to release CO2 by fine tuning..
  • Different Styles to Choose—This aquarium CO2 check valve provide many different styles for you to choose, can meeting your different demands..
  • Qualitative Materials—This aquarium CO2 check valve is made of high grade stainless steel material, which is anti-corrosion, abrasion resistant, glossy and durable..
  • Ergonomically Design—This aquarium CO2 check valve adopts ergonomically design, special metal-grinded surface, that is easy to operate..
  • Easy to Install & Remove—This aquarium CO2 check valve adopts simple design, which is easy to install and convenient to remove..
Check Stock

Thetford 34100 Style Lite & Style Plus Water Valve Kit

  • Replacement Package for Aqua-Magic Style Lite & Plus China Bowl toilets.
  • Kit contains: water valve assembly (Manufacturer 34312), clamp (Manufacturer 19541), mounting screws x 3 (Manufacturer 31053), closet flange seal (Manufacturer 02125), and instruction sheet (Manufacturer 34101).
Check Stock

AGM73269501 Water Inlet Valve Filter Screens (2 Pieces) for LG Washers by PartsBroz - Replaces Part Numbers AP5202486, 1810261, AH3618281, EA3618281 & PS3618281

  • ✅ PART NUMBER AGM73269501: It’s a high-quality exact equivalent for part numbers AGM73269501, AP5202486, 1810261, AH3618281, EA3618281, and PS3618281. The two-pack includes one hot-water line and cold-water line inlet valve filter screen..
  • ✅ FOR LG & KENMORE WASHERS: These inlet valve filters fit several washing machine models made by LG, Kenmore, and Sears. Refer to your owner’s manual or reach out to us to confirm compatibility with your specific model..
  • ✅ FIXES COMMON PROBLEMS: If your washing machine won’t fill up with water or takes a long time to fill up, you need to check the water inlet valve filter screens. Replacing the screens will restore water flow to your machine..
  • ✅ 5-MINUTE FIX: Fix your washing machine yourself in just five minutes. You just need these filter screens, a pair of pliers, and a small towel..
  • ✅ HIGH-QUALITY DESIGN: These inlet valve filter screens meet or exceed manufacturer specifications for performance and fit. They’re made from durable plastic and are color coded for easier use..
Check Stock

RULLINE 16 Pcs Engine Valve Lifters Lash Adjuster 3021077 5073596AA Fit Compatible with Dodge 4.7 Overhead Cam Engine 5

  • PRODUCT FEATURES - The pushrod seat is made of a special powdered metal iron alloy that is heat-treated for strength and wear resistance. In addition, contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity.
  • MIANLY FUNCTIONS - If your car's hydraulic tappet with issues of abnormal noise, stuck, excessively excessive wear on the underside, the check valve is not tightly closed, then this hydraulic valve adjuster product will be your best choice to solve these problems..
  • PERFECT FIT - For 4.7 Dodge/Chrysler Lash Adjusters HLA.
  • Manufacturer Part Number: 53021077 replaces: 5073596AA.
  • Package Includes - 16 Pieces Engine Hydraulic Lifters.
Check Stock

Check Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces

  • Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
  • Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
  • Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
  • This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
  • Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
  • Note: when installing the check valve, pay special attention to the flow direction of the medium.
  • The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
Check Stock

Engine Intake Manifold with Flow Control Valve Compatible with 2007-2017 Jeep patriot compass/2007-2011 Dodge Caliber Avenger Journey/2007-2009 Chrysler Sebring Replace # 4884495AK 911-902 4884495AH

  • ➤ 【PREMIUM QUALITY BUT LOWER PRICE】 Our intake manifold is designed for high durability and resistance by our strict process standards. We offer original manufacturer quality at lower cost than getting replacement at dealer..
  • ➤ 【IDEAL REPLACEMENT】 This intake manifold directly replaces the original. Perfect fit, easy installation, high reliability.(NOTE❗)This kind of intake manifold with baffle，can't fit for others without baffle. Please kindly check the 5th image as show on..
  • ➤ 【MANUFACTURER PART NUMBERS】4884495AK 4884495AD, 4884495AE, 4884495AF, 4884495AG, 4884495AH, 4884495AI, 4884495AJ, 4884542AC.
  • ➤ 【FITMENT】Compatible with 2007-2010 Jeep Patriot,Jeep Compass 2.0L 2.4L / 2011-2017 Jeep Patriot,Jeep Compass 2.4L / 2007-2009 Dodge Caliber 1.8L 2.0L 2.4L / 2010 Dodge Caliber 2.0L 2.4L / 2011 Dodge Caliber 2.4L / 2008-2009 Dodge Avenger 2.4L / 2009-2011 Dodge Journey 2.4L / 2007 -2009 Chrysler Sebring 2.4l.
  • After installing the Flow Control Valve valve, please wave the manifold baffle by hand to ensure that it can rotate smoothly, and then install the manifold on the car.
Check Stock

MSR Expedition Field Service Kit for Camping and Backpacking Stoves, All Whisperlite Stoves

  • Each kit includes: Jet & Cable Tool, O-Rings, Pump Cup oil, Safety Pin, Pump Seal, Air Tube, Fuel Tube and Filter, Shaker Needle, Fuel Tube Bushing, Check Valve Spring, Pump Cup, Check Valve Ball, Check Valve Plug, Check Valve Assembly, Jet Cleaning Wire.
  • WhisperLite Service Kit also Inlcudes: Priming Wick, WhisperLite G Jet, WhisperLite International G Jet, WhisperLite International K Jet, WhisperLite International/Universal UG Jet, WhisperLite International/Universal UK Jet, WhisperLite Universal UC Jet.
Check Stock

EVIL ENERGY 1/2 12mm Non Return One Way Check Valve for Fuel Line Oil Petrol Diesel Aluminium Silver Pack of 2

  • Function: The basic design of a one way check valve inhibits back flow in a line. Arrow marked on valve, showing fluid flow direction, preventing fuel....
  • Feature: The non return check valve body is made of high quality aluminum alloy can use longer than plastic one. Stable characteristics, high....
  • One-way Check valve installs in many diesel / bio fuel systems / Carburetors and low pressure fuel systems where you desire fuel to only flow one way.....
  • Easy installation and replacement. According to the little arrow on the valve, connect the fuel line. You can use some hose clamps which can make sure....
  • The minimum upstream pressure required to operate the aluminum one-way check valve is 2.9psi (0.2 bar). Working pressure:2.9-87 psi (0.2-6bar)....
Check Stock

EZ-FLO 20405LF Brass In-Line Check Valve

  • ✅DESIGN- The valve features a stainless steel to prevent water from traveling back to the source to avoid contamination..
  • ✅QUALITY- Made of from heavy-duty brass for extra durability and strength during every use..
  • ✅FUNCTIONALITY- The working pressure of the check valve is 200 PSI with a minimum of 5 PSI to open the spring..
  • ✅MEASUREMENT- The in-line check valve is equipped with a 1 inch female iron pipe (FIP) threaded connection for a maintenance free operation..
  • ✅SAFETY- The EZ-FLO in-line check valve is compliant with the Safe Drinking Water Act..
Check Stock