ReviewsChemical Resistant Fittings

Strongway Hydraulic Portable Ram Kit - 4 Ton Capacity, 17-Pcs.

Constructed of high-grade steel and built to exacting standards for quality and durability.
Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
Paint is oil, grease and dirt-resistant for easy cleanup.
Pump has an automatic overload system to help prevent damage to rams and equipment.
Easily adapts to hoses, rams, pumps, spreaders, and other accessories using common ZG 1/4in. fittings.

Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

... whether it has been installed in place. NOTE: Expansion tool is not included in the package..
【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemical environment..

Check Stock

Plews/Edelmann Amflo 4-12 Lightweight 1/4\ x 12' Nylon Recoil Air Hose Stores Itself When The Job is Done - Ideal for Home, Shop, and Industrial Use, Yellow

Amflo's 12' yellow nylon recoil air hose is ideal for home, shop, and industrial use where the tool is close to the air supply like industrial workstations and home workbenches.
Oil and chemical resistant hose retains it's self-coiling properties over time and stores itself when finished - keeping the hose out of the way when not needed.
200 PSI working pressure has the capacity for all kinds of pneumatic tools - brad nailers, staplers, rotary tools, blow guns, spray guns, and more.
Swivel end fittings reduce hose twist while bend restrictors extend hose life by reducing opportunities for 'pull' damage on the hose ends.
Features: 1/4 inch NPT swivel fittings to reduce twisting, rugged steel coil bend restrictors, 200 PSI working/800 PSI burst pressure, +32 to +120 temperature range.

Check Stock

Kalolary 200PCS Irrigation Fittings Kit Drip Irrigation Barbed Connectors for 1/4-Inch Vegetable Garden Lawn Water Hose Connectors 80 Straight Barbs+60 Tees+20 Elbows+20 End Plug+20 4-Way Coupling

❀PACKAGE INCLUDES：This 200-pieces barb connector kit includes: 80 x straight barbs，60 x tube tees , 20 x elbows fittings, 20 x end plug, 20 x 4-way coupling. Meet all the needs of garden irrigation parts..
❀LONG-LASTING: Made of high quality engineering plastics, durable, strong, water resistant, chemical-resistant materials to assure long life..
❀EASY TO USE: Use these durable irrigation fittings to your connect 1/4 inch drip irrigation tubing.Save money and time buying everything you need at once. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system..
❀EASY TO INSTALL：Secure and easy installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting..
❀SCOPE OF APPLICATION : Ideal for use with raised garden beds, residential, farm, lawn，greenhouse gardening and agricultural watering applications. Keep extra parts handy for irrigation repair or expansion..

Check Stock

Kalolary 250PCS Irrigation Fittings Kit Drip Irrigation Barbed Connectors for 1/4-Inch Tubing Flower Garden Lawn Irrigation 90 Straight Barbs + 70 Tees + 30 Elbows + 30 End Plug+ 30 4-Way Coupling

❀PACKAGE INCLUDES：This 250-pieces barb connector kit includes about: 90 x straight barbs，70 x tube tees , 30 x elbows fittings, 30 x end plug, 30 x 4-way coupling. Meet all the needs of garden irrigation parts..
❀LONG-LASTING: Made of high quality engineering plastics, durable, strong, water resistant, chemical-resistant materials to assure long life. Make sure you put the connected part into the 70~80°water for 10seconds before assmbling. After it cools down the tube will stay tight..
❀EASY TO USE: Use these durable irrigation fittings to your connect 1/4 inch drip irrigation tubing.Save money and time buying everything you need at once. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system..
❀EASY TO INSTALL：Secure and easy installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting..
❀SCOPE OF APPLICATION : Ideal for use with raised garden beds, residential, farm, lawn，greenhouse gardening and agricultural watering applications. Keep extra parts handy for irrigation repair or expansion..

Check Stock

Spears 406-020 PVC Pipe Fitting, 90 Degree Elbow, Schedule 40, White, 2' Socket (Pack of 5)

Elbow for connecting two pipes or fittings at a 90-degree angle.
Socket ends for connecting two unthreaded pipes or fittings.
PVC for chemical and corrosion resistance, strength, and light weight.
Maximum operating temperature of 140 degrees F.
Meets ASTM D1784 and D2466 standards for quality assurance.

Check Stock

Spears 829 Series PVC Pipe Fitting, Coupling, Schedule 80, 1-1/4" Socket

Coupling for connecting two pipes with the same diameter in a straight run.
Socket ends for connecting to male pipes or fittings.
PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
Maximum operating temperature of 140 degrees F.
Meets ASTM D1784 and D2467 standards for quality assurance, and certified by NSF International for potable water service.

Check Stock

60 Pieces Drip Irrigation 1/4 Barbed Tubing End Plugs,Barbed Connectors End Cap for Drip or Sprinkler Systems

【Great Value】：Comes with 60 pieces barbed end plug fittings in total,enough to meet your daily use..
【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
【BARBED DESIGN】：drip irrigation plugs tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
【EASY TO INSTALL】:barbed hose end plug is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
【FOR WIDE APPLICATIONS】:closure goof hole plugs are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..

Check Stock

2' x 100 FT Heavy Duty Reinforced PVC Lay Flat Discharge and Backwash Hose for Swimming Pools

Heavy Duty Pool Hose- High pressure resistance, weather and chemical resistant, aging resistant, wear resistant, ideal for water transfer. Essential pool supplies as pool drain hose, pool pump hose, pool filter waste hose..
High Quality Material Made - Pool discharge and backwash hose is made of PVC material, the material is resistant to abrasions and corrosion. Reinforced with 3-ply polyester yarn to prevent leaks and tears for durable use..
Discharging Hose Detail - Inside Diameter: 2inch.
Temperature Range : 23°F to 149°F (-5°C to 65°C).
Hose fits 2” hose fittings, if connected to the 2” PVC pipe, please select a larger hose size..
Easy to Use - Widely used in in-ground and above-ground pool equipment, easy to fit over a 2” or less filter outlet. After use, simply flat rolled up and store in a dry place out of direct sunlight for storage..
Excellent Customer Service - Our aim is to provide consumers with more practical and durable hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfied..

Check Stock

John Guest Speedfit KIT-ISRK Service and Repair Kit, Push-to-Connect, Polypropylene Fittings, 92-Count

NO TOOLS REQUIRED: Push-to-connect fittings provide a simple, quick, reliable, leak-free connection with no tools required.
DURABILITY: Provides excellent chemical resistance.
COMPATIBILITY: the 92-piece service and repair kit includes fittings for use in multiple different applications.
QUALITY: durable, odorless, tasteless, and non-toxic.

Check Stock

64 Pcs JIC 37° Flare Thread Cap & Plug Assortment Kit Seal Adapter Set for Hydraulic Hose Tube and Pipe SAE AN Fittings Galvanized Carbon Steel with Precision Threading Dash Sizes 4 6 8 10 12 16

COMPREHENSIVE & COST-EFFECTIVE KITS: We have assembled this kit, based on our years of experience, to include the six most used caps and plugs sizes: #4 (7/16-20), #6 (9/16-18), #8 (3/4-16), #10 (7/8-14), #12 (1 1/16-12), #16 (1 5/16-12). All 64 pieces will be packed in sturdy, transparent, impact-resistant cases.
they can be used as a storage box, keeping the set secure and organized. To compete with leading brands, we ensure that our hydraulic cap and plug kit is economically priced while still being fully effective. You don't have to break the bank when you purchase your fittings kit in whichever industry you work in..

Check Stock