ReviewsChipping Hammer

DEWALT DCH773Y2 60V MAX 2 in. Brushless Cordless SDS MAX Combination Rotary Hammer Kit

  • DEWALT SDS hammer drill has 19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete..
  • Anti-Rotation E-CLUTCH System of the cordless hammer drill shuts down the tool in bind up situations..
  • Constant speed electronics allows the tool to maintain speed under load..
  • The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature..
  • The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 - #14 rebar dowel applications and dry coring up to 6 inch.
  • Brushless motor and German-engineered mechanism..
  • Ideally suited for chipping in any lower wall and floor, ground rod driving, and bushing..
  • Tag Ready so users and companies can attach the DEWALT Tag and track its location virtually anywhere via the DEWALT Tool Connect app..
  • 7-position, variable-speed dial offers users control by adjusting speed of drilling or chipping based upon the thickness and density of the material..
Check Stock

VASTOOLS Welding Chipping Hammer with Coil Spring Handle,10.5 ,Cone and Vertical Chisel/ 10 Wire Brush Free

  • High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length..
  • Spring handle designed to absorb the shock of contact while cleaning and shipping way welding debris..
  • Tempered chisel on one end and point on the other.1-1/16" width chisel to remove welding slag faster..
  • Shoe handle wire scratch brush, 0.012" fill diameter, 5-1/4" brush length, 1-1/16" brush width, 10" overall length..
  • Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
Check Stock

Swpeet 4Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves,10 Inch Welding Chipping Hammer with Steel Coil Spring Handle for Cleaning Removing Slag

  • ☛ 1, What You Get ------ In this kit, You will get 4Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 pair Welding Gloves, In total 4Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb t....
Check Stock

[Upgraded] Rotary Hammer Drill, SDS Plus Hammer Drill 9.5Amp Anti-Vibration, Middleweight, 4 Function in 1 Knob Power Rotary Hammers for Concrete,Tile including Bits and Chisels-Towallmark

  • ...n't any additional tools, ensure a time-saving and convenient use..
  • ✔️【4 FUNCTIONS in 1 KNOB】4 function modes can be quickly switched by easily turning the dial: Drilling(work on steel, wood, etc), Hammer Drilling(heavy-duty work on concrete, brick, etc), Chiseling(chipping work on the hard surface). The multifunction of the power hammer drill is ideal for electricians, plumbers, MRO, concrete, drywall, etc..
  • 【2X ACTIVE VIBRATION REDUCTION】Towallmark light-weighting demolition hammer has adopted the vibration reduction VRT technology on both upper and lower connections of the handle(Almost all the other similar products only the upper connection of the handle adopts it). 2X active vibration reduction and the soft rubber handle design reduce fatigue of user and provide a comfortable grip for a long time of use..
  • 【CERTIFIED ETL SAFETY CLUTCH&DRILLING CAPACITY】This chipping hammer is tested and certified for ETL, which meets the safety requirements of America. The integrated safety clutch also ensures safe use for users and the long lifetime of the hammer drill if the bit jams or the hammer drill is overloa....
Check Stock

Keadic Professional Welding Slag Removal Tools Kit, including 10 Inch Welding Chipping Hammer with Coil Spring Handle, Welding Plier, Wire Brush & Welding Gloves Heat/Fire Resistant

  • ✔️ Complete Welding Slag Removal Tools Kit --- In our multi-function welding tools set, we prepared 3 practical welding slag removing tools for you, including 1 8 Inch Anti-Rust Welding Plier, 1 10 Inch Welding Chipping Hammer with Coil Spring Handle & 1 Durable Scratch Wire Brush. Besides, there is a Pair of Strong Leather Forge/Mig/Stick Welding Gloves highly resistant to spatter/heat/fire. It absolutely is a great HELPER for you to remove and clean corrosion and slag from most of your welds..
  • ✔️ Anti-Rust Welding Plier --- The pliers body is forged with high quality carbon steel, sturdy and durable, not easy to rust/deform/break.The precise tooth pattern provide it strong clamping force, no-slip. After special heat treatment, the jaws are very sharper and firmer, which improves its service life. Further more, its ergonomic rubber covered handle bring you comfortable touch, suitable for long time operation..
  • ✔️ Scratch Wire Brush --- The rust & slag cleaning brush is made of strong steel wire and sturdy wood handle, the ergonomic arc handle provides you comfortable operation feeling, make the cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole ....
Check Stock

VEVOR Demolition Hammer, 0.67″ 9.5 Amp Corded Concrete Breaker Accepts SDS-Plus Bits, 1050W Jack Hammer w/Flat and Point Chisel Bits & Case, 6.5 Joule Concrete Jack for Breaking tough Ground & Wall

  • ...aried circumstances, the 360-degree adjustable fore handle was designed. Its slip-proof rubber greatly enhances friction and absorbs vibration to achieve complete control of the jack hammer and a delightful work experience..
  • Details for Security & Ease: A self-locking switch is designed to secure your wrist when the chipping hammer is subjected to high torque force. The SDS-Plus chuck allows easy and secure bit changes to keep your project going. Heat outlet allows long working time without burning the demo hammer..
  • Wide Application: The electric jack hammer gains itself good fame in demolition, trenching, chipping holes in concrete, brick, wood, etc. It is applicable for various situations, such as plumbing, mechanical installation, water supply, and drainage facilities, etc..
Check Stock

Bosch RH745 1-3/4-Inch SDS-Max Rotary Hammer

  • SDS-max bit system provides tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate.
  • Combination dual mode selector 2 modes of operation: rotary hammer and hammer only mode.
  • Variable speed dial provides accurate bit starting and controlled chipping applications.
  • Turbo Power feature delivers 10% more power in hammer only mode.
  • Service Minder light indicates when preventative maintenance is required.
Check Stock

DEWALT 60V MAX Cordless Hammer Drill, 1-9/16 in., Tool Only (DCH481B)

  • The cordless hammer drill has 6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete..
  • Anti-Rotation E-CLUTCH System shuts down the DEWALT rotary hammer drill in bind up situations..
  • Constant speed electronics allows the tool to maintain speed under load..
  • SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature..
  • The light weight design makes it ideally suited for horizontal drilling for #3 - #6 rebar dowel applications and dry coring up to 3 inch.
  • Brushless motor and German-engineered mechanism..
  • Tag Ready so users and companies can attach the DEWALT Tag and track its location virtually anywhere via the DEWALT Tool Connect app..
  • Ideally suited for chipping in any lower wall and floor, ground rod driving, and bushing..
Check Stock

Rustark 3 Pack Scratch Wire Brush Slag Removal Tool Kit With Welding Leather Gloves, 10 Inch Welding Chipping Hammer and Wirebrush, Welding Slag Removal Tool for Cleaning Removing Slag

  • ...lag brush, 1 pairs welding gloves, totally 3 pcs. Full and convenient welding slay removal tool for you, saving your energy to looking for extra tool. In addition, offer reliable after-sale service.
  • Pls feel free contact us for any dissatisfaction. We will reply you within 12 hours for your satisfaction..
  • 【Welding Chipping Hammer】Made of durable high strength steel with multi-layer black powder coated for rust-resistance. Dual-head design with flat chisel on one end and point chisel on the other end, allowing it easier to use in tight and small space.The spring handle is designed to reduce the impact forces of contact. Coil Spring handle design for absorbing the shock of contact while cleaning and shipping way welding debris..
  • 【Steel Wire Scratch Brush】Made of solid stainless steel, wooden handle with pre-drilled hole for hanging, sturdy and durable, long service time. 252 mm in totally length, proper size for easier grip. Ideal for aggressive cleaning and removing rust and paint from most surfaces..
  • 【Protective Welding Gloves】 Made from thick and soft shoulder split natural cowhide leather with heat resistance,wear-resistance,puncture resistance and cut resistance. Straight Thumb design for best grip. Reinforced double leather stitching a....
Check Stock

DOITOOL Welding Chipping Hammers Steel Tack Hammer Wood Handle Outdoor Disassembly Tool For Removing Repairing Silver

  • Anti-rust, tempered steel chipping hammer remove Mig, Tig and Stick welding slags and spatter easily.
  • Forged, heat treated cone+vertical chisel head for maximum strength and safety.
  • Well balanced spiral handle on the hammer for ultimate comfort and shock absorption during metalworking.
  • Narrow face of the brush and slim hammer are great for hard to reach areas.
  • Wire brush with Stainless Steel and Carbon steel bristles removes paint, rust, debris and polish welds.
Check Stock

GEARWRENCH 1-1/4\ Soft Face Hammer Tip Yellow Soft - 82260S

  • Replacement tips for soft face hammer 82260.
  • Color coded for easy identification soft (cream) medium hard (yellow).
  • Tips thread directly into the hammer head.
  • Rounded shape to resist chipping or splitting.
  • Non-marring surface helps reduce noise when striking metal objects.
  • Ideal for light-duty assembly applications where you don't want to mar the surface.
Check Stock