ReviewsChipping Hammer Drills

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

REETAI-FOUR 9Pcs SDS Plus Concrete Hole Saw Kits, Tungsten Carbide Wall Hole Cutter Cement Stone Drill Bit Sets with Connecting Rod for Brick Stone Concrete Cement.

  • ..., coupled with high-quality and tough raw material, which is thicker and sharper than other common blades. The multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole and inner groove can quickly remove dust, thus preventing clogging..
  • FOR MOST HAMMER DRILLS: The shank of the connecting rod adopts SDS PLUS design, which is compatible with four-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • WIDE APPLICATION: This concrete hole saw kit easily drills through most common wall materials (brick, adobe, concrete, cement, and stone). It makes installing air conditioners, water pipes, water heaters, smoke pipes, sewers, etc. easier. You can order worry free and start using this hole saw kit for your home improvement projects right away..
Check Stock

QLT by MARSHALLTOWN Stone Mason's Hammer, 3 Pounds, 16 Inch Hickory Handle, Sharp End for Chipping Off Small Edges or Pieces of Stone, Rock Hammer, SMH3

  • The QLT by MARSHALLTOWN Stone Mason's Hammer is the ideal tool to have on the masonry jobsite..
  • The Stone Mason's Hammer has a sharp end for chipping off edges or small pieces of stone..
  • This 3 pound chipping hammer features a heavy-duty 16 inch hickory handle for durability and comfort..
  • Always wear safety glasses while using this product..
Check Stock

QWORK Welding Chipping Hammer, 10.5\ Two-head Hammer with Coil Spring Handle, Welding Cleansing and Crushed Ice

  • The product is manufactured in United States.
  • High carbon steel chipping hammer for maximum strength.
  • Tempered chisel on one end and point on the other.
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ...Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | Makita's Single-Piece Chisels are heat-treated and forged for unmatched STRENGTH and LONGEVITY, with its sharp edge design for MAXIMUM masonry impact.
  • ✅ Makita’s SDS-Max Shank Point Chisel demolishes and starts holes in concrete slabs, brick, mortar, slate, masonry, and all different types of stones | Makita’s Flat Chisel edges, chips, scales or channels concrete, stone, masonry and brick | Makita’s Scaling Chisel removes scale, rust, concrete, masonry, brick, stone and weld spatter or removes LARGE quantities of material.
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • ...dle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds. The welding hammer is a durable tool for long strokes. It can also be used as a life hammer and broken ice hammer.
Check Stock

eoocvt 14pcs Heavy Duty Impact Screwdriver Driver Bits Tool Socket Set Kit with Case

  • For use with your hammer to loosen frozen and rusted on screw Bolts.
  • bits to prevent rust and chipping plus a textured handle for total comfort and control..
  • This impact screwdriver allows you to use your own hammer to loosen rusty or frozen screws and bolts with ease..
  • This impact screwdriver features black oxide coating on the bits to prevent rust and chipping plus a textured handle for total comfort and control..
Check Stock

Sabre Tool 1-1/4 Inch x 15 Inch SDS MAX Rotary Hammer Drill Bit U-Flute Carbide Tipped for Brick Stone and Concrete 1-1/4 x 9.5 x 15

  • 1-1/4" x 9.5" x 15" SDS MAX Drill Bit – ONLY COMPATIBLE WITH SDS MAX ROTARY HAMMERS (NOT REGULAR DRILLS, NOT SDS+).
  • Our high quality rotary hammer drill bits are designed to work in all masonry applications.
  • Compatible with all SDS MAX sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • Long life - SDS hammer drill bit features a 4 blade cutter head with self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Optimized design – our SDS bit’s U-Flute design allows material to quickly move out of the hole while the bit remains cool.
Check Stock

Hilitchi 6Pcs Welding Slag Removal Tool Set, 8inch Welding Pliers, Welding Chipping Hammer, Wire Brush Wire Scratch Brush and 2 Stainless Steel Metal Sheet Thickness Gauges

  • Welding Chipping Hammer: The Welding chipping hammer features a tapered tip and a double bevel at the end, which is suitable for welders, and can be used on building sites, car maintenance, as well as breaking ice and knocking brick slag. It can also be used as a life hammer.Efficient, convenient and labor-saving..
  • Coil Spring Handle: The spring handles are designed to absorb vibration. Percussion buffering does not hurt hands. The hammer end design of the hanging hole, easy to hang on the nail board or nail, so that its storage and use more convenient and effective..
  • High Quality: High-carbon steel forging, with toughness and high hardness, not easy to wear, durable and not easy to burn-in..
  • Note: Wear protective gloves and goggles before using the device, keep away from children..
  • 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!.
Check Stock

QWORK Welding Chipping Hammer, 14oz, Two-head Hammer with Wooden Handle, Welding Cleansing and Crushed Ice

  • Welding Chipping Hammer: The Welding chipping hammer features a tapered tip and a double bevel at the end, perfect for cleaning and removing slag from all welds. It is suitable for welders, and can be used on building sites, car maintenance, as well as breaking ice and knocking brick slag. It can also be used as a life hammer.Efficient, convenient and labor-saving..
  • Wooden Handle: Solid wood production, ergonomic, comfortable to hold, reduce recoil, reduce working fatigue..
  • High Quality: Forged with 1045# steel material, blow quenching heat treatment, high hardness, strong and durable. Hammerhead and wood handle are closely connected with the inlay technology, it is not easy to break off, good safety..
  • Note: Wear protective gloves and goggles before using the device, and keep away from children..
  • 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!.
Check Stock

HSTECH Welding Chipping Hammer with Coil Spring Handle, 10.5\

  • The Welding Hammer: Spring handle welding chisel hammer skimmer. Used for removing slag and welding residue..
  • The Spring Welding Design: Spring handle is designed to absorb the shock of contact while cleaning and shipping way welding debris. One end is a flat chisel and the other end is a conical chisel to get into tight spots..
  • 2Pack Shoe handle wire scratch brush, 0.012" fill diameter, 5-1/4" brush length, 1-1/16" brush width, 10" overall length..
  • Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds. This type of welding hammer is a durable tool for long strokes. It can also be used as a life hammer and broken ice hammer..
Check Stock