ReviewsChrome Hardware

DreamLine Elegance 32 1/4 - 34 1/4 in. W x 72 in. H Frameless Pivot Shower Door in Chrome, SHDR-4132720-01

Model Size: 32 1/4 - 34 1/4 in. W x 72 in. H.
Premium 3/8 in. (10mm) thick certified tempered glass.
DreamLine exclusive ClearMax water and stain resistant glass coating.
Anodized aluminum wall profiles allow up to 1 in. adjustment for width or out-of-plumb (uneven walls).
Matching SlimLine shower base: DLT-1136360 (sold separately).
3/8 in. (10mm) thick ANSI certified tempered glass for an upscale look. Frameless glass design to give an open and airy feel to your shower space.
Reversible for a right or left door opening to fit your specific layout.
Single panel pivot shower door: 32 1/4 - 34 1/4 in. W x 72 in. H.
Profile allows up to 1 in. adjustment for width or out-of-plumb.
Optional matching shower base available on select model sizes (sold separately).
IMPORTANT! All measurements should be taken only AFTER walls are finished. Professional installation recommended.

Check Stock

United Pacific 72001 Chrome Swan Hood Ornament

Windrider chrome flying goddess hood ornament with Blue color wing.
Body in heavy duty chrome die-cast, Wing in colored ABS. Size- 7.5" (L) x 7" (W) x 8.75" (H).
Universal flat surface mount, Mounting Hardware included for installation.
Upgraded WindRider wing design exclusive from Grand General with illuminated gentle glow effect. Black does not light up.
Sold by each, WindRider wing series also available in chrome swan (GG 48096) and fighting stallion (GG 48390) hood ornaments.

Check Stock

DreamLine SHDR-1960723L-01 Shower Door, 56-60\ W x 72\ H, Chrome

...Reversible for a right or left door opening to fit your specific layout.
Premium 3/8 in. (10mm) thick certified tempered glass.
DreamLine exclusive ClearMax water and stain resistant glass coating.
Anodized aluminum wall profiles allow up to 1 in. adjustment for width or out-of-plumb (uneven walls).
Matching SlimLine shower base: DLT-1132480, DLT-1134480, DLT-1136480 (sold separately).
IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
3/8 in. (10mm) thick ANSI certified tempered glass for an upscale look. Frameless glass design to give an open and airy feel to your shower space.
Reversible for a right or left door opening to fit your specific layout.
Profile allows up to 1 in. adjustment for width or out-of-plumb.
Optional matching shower base available on select model sizes (sold separately). Glass Shelves included.
IMPORTANT! All measurements should be taken only AFTER walls ar....

Check Stock

Hafele Closet Rod Oval w/Supports Set of 4 (18\)

MAXIMIZE YOUR BELT STORAGE: This 9-hook pull-out belt/scarf rack is the perfect accessory to help keep your closet organized.
DURABLE CONSTRUCTION: Designed of heavy gauge plated metal wire construction in a chrome finish.
Glides smoothly on 100-pound rated full-extension ball-bearing slides.
INSTALLATION: Simple and easy 2 screw installation with included hardware.
Can be installed for left or right-handed application.
DIMENSIONS (W x D x H): 2.5 x 14 x 1.88 inches.
Frameless minimum cabinet opening (W x D x H): 2.5 x 14 x 1.88 inches.
Installs easily into closets with a depth of 14 inches.
INCLUDED: Includes 1 chrome belt rack and mounting hardware.

Check Stock

Kuryakyn 9931 Bluegrass Breather Catch Tank for Harley-Davidson Motorcycles, Chrome

Features banjo fittings and chrome tubes that route the vented gasses upward so gravity can keep any expelled oil droplets in the engine.
Helps in venting expelled oil from the cylinder heads.
It is recommend to vent the crankcase in open air by running the vent line up and out of sight beneath the tank.
Includes (1) Chrome Catch Tank Assembly, (1) Chrome - LIL Tank, (1) Chrome - LIL Tank Inlet Rib, (1) Rubber Gasket, (1) Vent Pipe, (1) Oil-Safe Sponge, (1) Hardware Kit.
Suggested for installation (not Included): allen wrenches.
Compatible with Harley-Davidson models: Using the Bluegrass Breather Kit.

Check Stock

GG Grand General 48030 Chrome American Eagle Hood Ornament

WindRider chrome swan hood ornament with Blue color wing.
Body in heavy duty chrome die-cast, Wing in colored ABS. Size- 6" (L) x 7" (W) x 7.5" (H).
Universal flat surface mount, Mounting Hardware included for installation.
Upgraded WindRider wing design exclusive from Grand General with illuminated gentle glow effect. Black does not light up.
Sold by each, WindRider wing series also available in chrome flying goddess (GG 48106) and fighting stallion (GG 48390) hood ornaments.

Check Stock

TCT-MT Hard Saddlebags Lid Latch w/ Chrome Conversion Bracket Fit For Harley 1984-2013 Softail Fatboy FLSTF EFI FLSTFI Heritage Classic FLST FLSTC Bad Boy FXSTSB Springer Night Train 2012 2011 2010

【FITMENT】For Harley Softail 1984-2013 (except softail slim, softail deuce models)..
【CONDITION】Aftermarket 100% Brand New.
Easy to install And No install instructions..
【SADDLEBAGS】Color: Vivid Black Finish ( No Need to paint ).
Size: As picture Shown. (outside dimension measurements)..
【BRACKETS】Four rubber bottom supports.
️[NOTE]: Exhaust MUST sit below your rear axle.
Turn signal relocation kit IS Required (excludes Deluxe models)..
【PACKAGE INCLUDED】A pair Black saddlebags With Keys Latch.
A pair Chrome heavy duty metal brackets With mounting hardware..

Check Stock

Euro Style Case for Pioneer CDJ 2000 Nexus CDJ 1000 CDJ-900 CDJ-800 XDJ-1000

1 " Black Laminate Ply Construction.Chrome Steel and Aluminum Hardware.Fully Foam Lined Interior..
Chrome Ball Corners.Chrome Recessed Lockable Latches.Spring loaded Handles..
Outer Dimensions :Height : 7.5" (190.5mm).
Inner Dimension : Length: 19.6" (497.84mm) : Width: 13"(330.2mm) :Height: 5.5" (139.7mm)..

Check Stock

Mofun Chrome Luggage Rack Stealth Style Detachable Compatible with 2009-2022 Harley Touring Road King Electra Glide Road Glide Street Glide

【Fitments】: Fit 2009-2022 Harley Touring Road King Electra Road Street Glide equipped with 4-point Docking Hardware Kits..
【Specifications】: Condition: Aftermarket 100% brand new..
【High Quality】: Surface Finish: Triple Polished and Plating (Copper+Nickle+Chrome). High Quality Chrome Plating, superior quality and durable for long service life and rusting resistance..
【Installation】:Easy to install. Detachable mounting luggage rack for conveniently to install..
【Package Including】:1×Detachable Stealth Luggage Rack. (Not including installation instruction and hardware).

Check Stock

Rubbermaid FastTrack Tie & Belt Holder, White (FG3R14FTWHT)

MAXIMIZE YOUR BELT STORAGE: This 9-hook pull-out belt/scarf rack is the perfect accessory to help keep your closet organized.
DURABLE CONSTRUCTION: Designed of heavy gauge plated metal wire construction in a chrome finish.
Glides smoothly on 100-pound rated full-extension ball-bearing slides.
INSTALLATION: Simple and easy 2 screw installation with included hardware.
Can be installed for left or right-handed application.
DIMENSIONS (W x D x H): 2.5 x 14 x 1.88 inches.
Frameless minimum cabinet opening (W x D x H): 2.5 x 14 x 1.88 inches.
Installs easily into closets with a depth of 14 inches.
INCLUDED: Includes 1 chrome belt rack and mounting hardware.

Check Stock

Tack Shack of Ocala Leather Halter with Customized Engraved Name Plate (Warmblood)

...r horse halter, Tack Shack Leather halters are the top of the line! Our Leather Halter is beautiful enough for a show halter for horses, or for turnout or training. Made from beautiful leather, durable enough for daily wear, but nice enough to be used at shows. Soft supple leather and durable, solid brass or chrome hardware makes this halter a long lasting addition to your supplies..
ADJUSTABLE AND EASY TO USE: Our Leather horse halter is the ultimate halter for everyday use on the farm or ranch. A double buckle crown allows for adjustability and fit. A rolled throat with a throat snap makes putting the halter on or off easy, while also allowing for ease when clipping the face. An English chin Reduces bulk and makes for a clean appearance..
MULTIPLE SIZES AND STYLES: Our beautiful leather halter for horses comes in three sizes. Cob, Horse or Warmblood. You can see the specific measurements in our comparison chart below. You can also choose from a Padded Halter In Green or Blue. Our padded halters are double stitched. Our Brown/Brass, Black/Brass, and Black/Chrome halters are triple stitched. Plates Match Hardware. All Halters have a throat snap..
CUSTOM ENGRAVED NAME PLATES: Our halters come with an optional engraved name plate. Choose from one or two l....

Check Stock