ReviewsChuck And Friends Commercial

Campbell Hausfeld Air Compressor, 80-Gallon Vertical Two-Stage 25CFM 7.5HP 208-230V 1PH (CE7000)

  • Commercial Duty Cast Iron, Oil-Lubricated, Two Stage Pump.
  • Mounted and wired motor starter for quick electrical hook up.
  • Industrial-rated NEMA motor for reliable service.
  • Fully enlcosed metal belt guard for safe operation.
  • Bundle this unit with a Camplbell Hausfeld 50 ft. Air Hose (PA121600AV), 17 Piece Acessory Kit (MP284071AV), and the 3-in-1 inflation gun, chuck and guage (MP600000AV).
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

PSI Woodworking CSCBARR52 Barracuda Insta-Change Jaw Chuck System

  • remove and replace all 4 jaws in less than a minute.
  • jaws will snap into place for a secure mount.
  • use the included jaw removal tool to pop them off the chuck body.
  • Instar-change jaw chuck system includes: barracuda chuck body, set of #2 round jaws, set of pen blank drilling jaws, woodworm screw chuck, jaw tightening key, jaw removal tool, storage case.
  • Barracuda chuck body: pre-threaded at 1" X 8TPI, weighs 4 lbs. , diameter 3. 5.
Check Stock

GODESON Air Chuck Locking Air Chuck use for Tire Inflator Nozzles Pack of Clip-on and Twist-on Chucks Pack of 2pcs

  • 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with lock on make the tire air chucks durable and Reliable..
  • 2. INTERCHANGEBALE AIR CHUCKS- including Clip-on chuck and Twist-on chuck(thread on) in 1 package. You just choose it for different using. Clip- on....
  • 3. SMART DESIGN with Large Bore of tire air chuck, Open flow through for heavy duty air chuck, while close flow through for clip-on chuck.
  • 4. UNIVERSAL CONNECT TYPE ,1/4-Inch Female NPT, 3/4-Inch Hex Air Chucks, Fits Standard 1/4" NPT Fittings.
  • Quick connect tire inflator chuck, Designed to use with Inflator and pressure gauge. LIFETIME 100% Satisfaction....
Check Stock

Lathe Chuck, K72-80 4 Jaw 3.15 Inch 4000r per min Independent and Reversible Jaw Metal Lathe Chuck Turning Machine Accessories with 1 Hex Wrench and 3 Screws

  • HIGH QUALITY: The K72-80 Lathe Chuck is 100% brand new and high quality, hardened and durable in use..
  • WHOLE SET: The package of this Lathe Chuck includes 1 x 4-Jaw Lathe Chuck, 1 x Hex wrench and 3 x Screws..
  • FEATURES: Each jaw of 4-Jaw Lathe Chuck is independently adjustable and reversible. The speed is 4000r/min. The chuck diameter is approx. 80mm / 3.15in..
  • SUPERIOR PERFORMANCE: The Metal Lathe Chuck can be adjusted Independently to center suitable for processing special with superior gripping Force..
  • LONG LASTING: Vulnerable parts of the Chuck Lathe Parts are specifically engineered by quenching, for greater durability and extended life..
Check Stock

Chuck handtite keyless 1/2-Inch carded

  • For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling. These 1/32" - 5/8" JT33 Taper drill chucks have knurled grips and the chuck key is included..
  • Arbor hole tapers from .80 inches at the opening (bottom of chuck) to .78 inches 1/2" down into the arbor hole. This gives a good fit profile for getting the correct chuck for your drill press.
Check Stock

Mudder 2 Pieces Portable Air Chuck Set Including S699 1/4 Inch Closed Ball Tire Air Chuck and S690 1/4 Inch Fnpt Dual Head Air Chuck for Tire Inflator Gauge and Air Compressor

  • Package includes: the portable set includes 1 piece S699 1/4 inch closed ball air chuck and 1 piece S690 1/4 inch fnpt dual head air chuck, this....
  • S690 Dual head air chuck: with 1/4 inch female national pipe thread, and the maximum air pressure is 150 pounds per square inch, it has the function....
  • S699 Closed ball air chuck: with 1/4 inch fnpt air inlet, its function is to enable the shutoff valve to shut down the air flow when the stem is not....
  • Easy to install: when you want to use closed ball air chuck or dual head air chuck to work, which just needs to be connected by screw rotation, the....
  • Sturdy material: the closed ball air chuck and dual head air chuck are made of brass mainly, they have good corrosion resistance and wear resistance,....
Check Stock

Chuck: Season 1 [Blu-ray]

  • Special Features Include * Declassified Scenes * Chuck’s World – An inside look at character development and casting sessions * Chuck on Chuck – Series Stars Zachary Levi and Joshua Gomez join creators Josh Schwartz and Chris Fedek for some point/counterpoint * Chuck vs. the Chuckles – aka: The Gag Reel * Chuck’s Online World – a gallery of web originated mini-featurettes.
  • Zachary Levi, Yvonne Strahovski, Adam Baldwin (Actors).
  • English, Spanish, French, Danish, Dutch (Subtitles).
Check Stock

SAFELIFE Bike Straight Presta Valve Tire Air Chuck 1 PC, L-Type Schrader Tire Chuck 1 PC for Bicycles, Motorcycles, Medium & Small Cars - 1/4" NPT Open Flow

  • Ready to use tire chuck air tool(2 pack), compatible with any gauge or air compressor using 1/4" NPT threading. L-type：1.34*0.63*1.77 inch.
  • Built to last from solid brass, corrosion-resistant. Presta Valve bicycle air chuck features straight angle to get in between spokes of tires to access valve stem with ease. Schrader Valve car air chuck with 90 degree body easy access to hard-to reach tire valve stems..
  • Straight air chuck engineered for bicycle tires that use Presta valve stem systems - including mountain bikes (MTB) and road bikes. L-type air chuck suitable Schrader valve tires for bicycles, motorcycles, and small and medium-sized vehicles..
  • Open flow technology air flow freely through chuck, no check valve. Perfect for inflating tires by using an attached air compressor, or simply checking pressure and deflating by using a compatible tire pressure gauge..
  • Package includes： 1 PC Presta Valve Tire Air Chuck.
  • 1PC L-type Schrader Valve Tire Air Chuck.
  • A reasonable combination meets your different needs..
Check Stock

BACHIN Mini Lathe Beads Polisher Machine Diy Machining for Table Woodworking Wood DIY Tool Lathe Standard Set

  • Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use..
  • Power: 100W Voltage: 24V DC Material: aluminum alloy and Acrylic Speed: 5000-8000 r / min, 7 grade speed Size: 310* 60 * 70mm 3x Hex shanks(0.059inch,0.079inch,0.098inch).
  • Maximum turning diameter: 70mm. Maximum clamping length: 180mm. Chuck clamping range: 0.6-6mm.
  • High-precision, stability, low noise, aluminum alloy materials, CNC machining..
  • Thick aluminum base, acrylic dust cover motor. Transparent plexiglass shield, super convection cooling holes..
Check Stock

TecUnite 2 Pack Air Chuck 2-in-1 Dual Head Tire Chuck for Inflator Gauge Compressor Accessories

  • Many uses: with 1/ 4 inch female national pipe threads, the air chuck can be applied for trucks, buses, cars, motorcycles, bicycles, etc..
  • Easy operation: the tire chuck adopts a push-in chuck design.
  • No need to thread the chuck onto valve stems, just push the chuck onto the valve for a....
  • Multi function: 2-in-1 dual head tire chuck has the function of checking pressure and inflation.
  • The 1/ 4 inch NPT threads make this gauge fit for....
  • Good quality: made of chrome-plated iron and zinc alloy, can be applied repeatedly for many times.
  • There is no need to worry about rusting, tarnishing....
  • Quantity: each package come with 2 packs air chucks measuring 16.5 x 3 cm/ 6.5 x 1.2 inches.
  • Small size allows for easy carrying and storage, can meet....
Check Stock