ReviewsChuck Housing

Mudder 5 Pieces 1/4 Inch Air Chuck Set Including S690 Dual Head Air Chuck, Open Flow Chuck and Closed Flow Straight Tire Chuck with Clip for Tire Inflator Pressure Gauge Supplies

  • Package includes: there are 1 piece of S690 dual head air chuck, 2 pieces of closed flow air chuck and 2 pieces of open flow ball air chuck with clip, 5 pieces in total, can meet your needs of different needs.
  • Dual head air chuck: designed with 1/ 4 inch Female national thread, can compatible with tires on trucks, buses, and other 2-in-1 multi-functional air chucks, functional in checking inflation and pressure, the maximum air pressure is 150 pounds per square inch.
  • Closed flow air chuck: 1/ 4 inch female national thread and rated pressure can be up to 250 pounds per square inch, it enables the shutoff valve to shut down the air flow when the stem is not opened, air only flowed when the chuck is engaged, the straight tire chuck can compatible with valves for most vehicles.
  • Note: when you take the air chuck to measure pressure or inflate a tire, please use the clip to make sure the chuck to the valve stem for sealing.
  • Open flow air chuck: designed to compatible with tire inflator gauges, suitable for most, there is a locking clip which can secure to seal the air chuck into place to a valve stem, so you don't need to make the chuck to valve stems, suitable for trucks, buses, cars, bicycles and motorcycles.
  • Material: our air chuck set is mainly made of bra....
Check Stock

Mophorn K11-200 Lathe Chuck 8 Inch 3-jaw,Lathe Chuck Self Centering Reversible Hardened Steel With Internal and External 2 Set Jaws

  • Premium Steel Structure: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC 58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • Large Clamping Range: This chuck includes two sets of internal and external jaws. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • High-Performance Chuck: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Effortless Operation: The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
Check Stock

180W Rotary Tool Kit, NEU MASTER Corded Power Rotary Tools with 165 Accessories and 6 Variable Speed, 10000-35000RPM Electric Drill Set for Handmade Crafting Projects and DIY Creations

  • ...usting rotation speed flexibly according to different working duties and the type of materials being used.easily meet your need for DIY..
  • 【ERGONOMIC DESIGN】Rotary tool's body is soft rubber ergonomic which ensures comfrt for long working hours. the ventilation holes on housing effectively dissipate the heat of running motor, keep consistent performance,extend tool's life..
Check Stock

BOSCH PS21N 12V Max Two-Speed Pocket Driver (Bare Tool)

  • Effective pocket driver design – has pro power in a two-speed pocket driver at only 1.4 Lbs. (tool only, not including battery).
  • Professional motor – delivers 265 In.-Lbs. of torque and a max speed of 1,300 rpm for real performance.
  • Compact housing – features a head length of only 5.6 In. and a weight of only 1.4 Lbs. (tool only, not including battery).
  • Two-speed transmission – provides a high-power setting at 0-350 rpm and a high-speed setting at 1,300 rpm.
  • Precision 20+1 clutch settings – allows for accurate torque settings for less fastener damage.1/4 In. hex quick-change chuck – provides enhanced bit grip and fast bit changes.
Check Stock

PORTER-CABLE Hammer Drill, 1/2-Inch, 7-Amp, Dual Speed (PC70THD)

  • 7.0 amp motor of DEWALT hammer drill is designed for increase performance.
  • Cast metal gear housing helps dissipate heat from internal components for additional durability..
  • Hammer drill and drill modes provides versatility for drilling into metal, wood, concrete, brick, block and many other materials..
  • Dual speed transmission (0-1,100 & 0-3,100) provides maximum torque in setting one and maximum speed in setting two..
  • Streamlined over mold body and handle for increase comfort and reduced user fatigue..
  • Two finger locking trigger provides ease of use during extended use..
  • Side handle provides more control in heavy applications and bind up situations..
  • 1/2-inch Metal chuck and key provides holding pressure for increased bit retention..
Check Stock

Larcele Hook Wrench for Nut, Side Adjustable Spanner YYBS-01 (Round Head,1 1/4-3inch(32-76mm))

  • 【MATERIAL】Forged with high carbon steel, hardness up to 40-45 degrees, not easy to break and has long service life..
  • 【DESIGN】Unique unibody design with phosphating finish, excellent shape spanner for round ER chuck nut..
  • 【USAGE】Hook spanner is designed to drive spanner head screws, threaded rings and shafts. Exact fit reduces the risk shaft, nut and housing damage. Suitable for machine tools, automobile, mechanical equipment..
  • 【HANGING HOLE】Wrenches could be hang on the wall by the the hole at button, which also makes it portable and stored..
Check Stock

uxcell Drill Chucks, 1.5-10mm Capacity 3/8-24 UNF Threaded with Chuck Key for Electric Impact Corded Cordless Drill

  • [SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
  • [CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
  • [3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
  • [APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
  • [MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.
Check Stock

uxcell Drill Chucks, 3/8-24UNF Threaded 1.5-10mm Capacity with Chuck Key for Electric Impact Corded Cordless Drill

  • [SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
  • [CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
  • [3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
  • [APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
  • [MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

Milton S-697-2 1/4 FNPT Euro Style Air Chuck

  • Unique design allows chuck to easily clip on to valve threads for hands free tire inflation.
  • Easy on style air chuck - press down on handle, push onto tire valve threads and release handle to grip threads.
  • Air chuck Euro style air chuck with grip chuck clip 1/4" Female NPT Max pressure 150 PSI Chuck clips on to tire valve Skincard.
  • Max. pressure: 150 pounds per square inch.
  • Milton is your number 1 source for Quality Air Accessories.
Check Stock