ReviewsChuck Key

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Warehouses Offices(Short tail M8x0.75 chuck + rod set)

Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..

Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Car Garages(Short tail M8x0.75 chuck + rod set)

Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..

Check Stock

Grinder Chuck Key Drill Chuck Carbon Steel M8 for Car Garages(Short tail M8x0.75 chuck + rod set)

These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..

Check Stock

HD Chuck HEAVY DUTY 5/8' (16mm) Magnetic Drill Chuck with 3/4' Weldon Shank Adapter by BLUEROCK Tools

5/8" Heavy Duty Chuck for Magnetic Drill Press.
3/4" Weldon Shank adapter (The jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank).
Please confirm your drill is compatible with a 3/4" Weldon Shank.
51mm WIDE x 86mm Long (Jaws Extended) 69mm (Jaws Receded).

Check Stock

VEVOR 2.75-Inch Wood Lathe Chuck, 4-Jaw Precision Self-Centering Keyed Lathe Chuck Set, 1-Inch x 8TPI Thread Mini Lathe Chuck, Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 0.9" to 1.9". Outer jaws spread inside of workpieces with pilot holes ranging from 1.4" to 2.5". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, and 1 x wrench to facilitate your work..
High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves the flexibility. Clamping most shaped workpieces can also be performed..
Simple Operation: This complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..

Check Stock

PHUKIMLONG CKS275 2-3/4 Inch Wood Lathe Chuck Set with 1\-8TPI Includes 2.75 Gear Chuck 5 Interchangeable Jaws, 1 Wood Screw,3 Years Warranty

PRODUCT INCLUDES: (1) 2.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with 8Ea*short and 8Ea*long multi-position grip-studs.
Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
Application: This CKS275 2-3/4"Wood Lathe Chuck Set includes a 4-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..

Check Stock

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case.
Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs..
pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter.
#1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8".
#2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2".
With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe.
including bowls, spindles, pens, other small turning projects, and much more.
Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!.

Check Stock

Towallmark 7-Amp 850W Hammer Drill 1/2-Inch Corded Electric Hammer Drill with 3000RPM Variable Speed 10 Drill Bits for Home Improvement DIY Steel Masonry Wood NOT for Reinforced Concrete

【Powerful Motor & Variable Speed】The Towallmark hammer drill equipped with 7 Amp high efficiency industrial copper core motor, gives more power....
【Hammer & Drill Function 2-in-1】Switch the orange button on the top to select hammer or drilling function by your tasks. Drilling function for....
【Metal Chuck】The metal chuck is more durable and sturdy than the plastic drill chuck, with longer life time. The maximum chuck diameter of this....
【Lightweight & Ergonomic Design】This hammer drill has been designed with light weight of 3.6 lbs to ensure an easy operation and less fatigue for....
【What You Get】1* Towallmark corded hammer drill, 1* chuck key, 1* depth ruler, 1* Auxiliary Handle, 5* construction drill, 5* spiral drill..

Check Stock

Carbon Steel M8 Easy to Use Grinder Chuck Key for 3-Jaw Mini Drill Bit(Short Tail M8x0.75 Chuck + Rod Set)

And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..

Check Stock

OCR Hand Drill Manual Crank Drill 3/8 inch (1.5mm-10mm) Precision Chucks Hand Drill with 2Pcs Drill Bit Set for Wood Plastic Acrylic Circuit Board Punching

【Material】Made of Cast Steel which is Heavy duty and Long Life. Thickened high-strength ABS engineering plastic handle, which can also store spare drill chuck,2pcs drill bits included..
【Chuck Accept Drill Range】1.5mm-10mm (3/8 inch).
【Easy To Operation】Double-pinion design ensures a smooth and flexible operation without no stuck. 2 gears make the job more sturdier and efficient..
【Easy Installation】The installation of the chuck and bits involves only acts of twist and screw. A cleverly designed chuck key is provided to help you elegantly rotate the upper part of the chuck to change bits..
【Wide Application】Perfect for drilling in wood, bamboo, soft thin metal, copper, aluminum, plastic, PVC, acrylic, glass fiberboard, circuit board. Note: Not suitable for drilling hard metal material, tiles, diamonds, concrete..

Check Stock

Renekton 3/8” Drill Chuck with 1/4” Quick Change Hex Drive, Convert Impact Driver Hammer and Wrench to Drill

DURABILITY: The chuck is high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating. All the extensions are applied with rust-proof finishing for extended service life..
HIGHLY COMPATIBLE: Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16” to 3/8” shank..
UNIVERSAL SHANK: Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
MULTI PURPOSE: With included 1/2” Drive by 1/4” Hex adapter, can easily transform power impact wrench to a drill, with best performance under rotation speed between 500rpm ~ 3500rpm..
INCLUDES: This complete power tool conversion kit includes keyed 3/8” drill chuck, a chuck key and a 1/2” Dr. x 1/4” Hex adaptor..

Check Stock