ReviewsCircle Bearing

Garage Storage Wall Shelving Mounted, 4PCS 2x3ft, Loads 1000 lbs Heavy Duty Sturdy Wall Shelves, Strong Garage Organiser, Storage Racks Units, Black Metal Floating Adjustable Wall System Shelf

  • ...S), Greatly increased compression resistance, Not easy to deform. Seamless overlay welding of multilayer components, Overall relief of top layer pressure. When either used as a corner shelf or wall shelf, Reverse bracket design is more stable and sturdy. Because Dtrik garage storage have 2 x Support Rods, Therefore bearing capacity reach the high..
  • SPECIFICATIONS✔: Garage storage shelf 2*3 feet for one piece size, bracket arc height 0.5 feet. Heavy-duty powder coated steel garage storage shelves set each component with high quality hardware provided. Depending on the weight bearing of the wall and the installation environment. Maximum load capacity is 250 lbs per piece.
  • INSTALLATION✔: 1.Measure the locking distance of the brackets.
  • 2.Place against the wall installation template at a suitable height by spirit level.
  • 3.Mark the center of the circle on locating hole with suitable width.
  • 4.Remove the installation formwork, Punch on the marked point.
  • 6. Fixed mesh plate on brackets by screws and nuts.
  • 7.Connect multiple grid shelves by U-shaped screw. QUICK INSTALLATION SUCCEEDED..
  • IMPORTANT✔: 1ps: This suspension frame is suitable for installation on concrete or wooden walls. If it is a keel frame, please check the hole spacing we....
Check Stock

Southwest Wheel 2-Pack 4-Hole 4 Bolt Circle Idler Hub for 2,000 lb Axles BT8 Spindle for 1 Spindle That uses L44643 Trailer Bearings

  • 2-Pack 4 studs 4" bolt circle using TruRyde L44643 inner and outer bearings..
  • Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts..
  • TruRyde Hubs are pre-raced & all studs are 1/2"-20 with yellow finished zinc plating..
  • TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
Check Stock

RIGID HITCH INCORPORATED Pair of 5-Bolt on 5 Inch Hub Assembly (AKSQ-350055) Includes (2) Square Stock 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings

  • 5 studs 4.5" bolt circle using L44643 inner and outer bearings..
  • Contains TruRyde inner bearing, outer bearing, seal, grease cap and lug nuts..
  • Fits a BT8 Spindle (1" OD) - Will not work on 1 1/16" spindle or some marine trailer axles..
  • TruRyde hubs are pre-raced & all studs are 1/2"-20 with yellow finished zinc plating..
  • TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
Check Stock

Balloon Arch Stand,Easy Assembly Round Backdrop Stand,6.6ft Circle with Bases Wedding Arch,Circle Backdrop Stand,Metal Circle Balloon Arch Frame For Bridal,Birthday Party Decoration

  • Wedding arches for ceremony package includes:1 upgraded round backdrop stand,100 balloon rings,2 rolls of balloon glue points, 2 rolls of double-hole....
  • Circle wedding arch lengthen double bar stand,make the stand more stable,more windproof.
  • Circle backdrop stand made of high quality metal material,better load-bearing capacity up.Powder coated finish not easy to rust,can be used indoors or....
  • You can decorate round balloon arch frame with balloons,garlands, tulle swags, string lights..
  • The gold balloon arch for wedding,ceremony,birthday,baby shower decoration..
Check Stock

Fun Gift Motorized Rotating Display Stand 360 Degree Electric Photography Turntable with 6 PVC Backgrounds, Battery/USB Power Supply for Display Products Photography Jewelry Watch Models (Black 5.12'')

  • What You Get: 5.12 inch motorized rotating display stand *1.
  • 2 Years warranty. Attention: In order to prevent wear and tear on the shipment, we will attach a protective film. Just tear the protective film the item would become brand new!.
  • Premium Material: Rotating display made of premium ABS engineering plastic, compressive and wear-resistant, basically no noise during operation, 6 multicolor PVC backgrounds meet your different shooting needs. The size of the turntable is 5.12" x 5.12" x 1.38", and the maximum load-bearing capacity is differentiated according to the rotation speed.
  • 360 Rotating Design: Electric Rotating Turntable Display Stand adopts a 360° rotating turntable design, which can manually adjust the rotation speed and direction, 12/22 seconds per circle, forward and reverses function, suitable for all-around display and angle.
  • 3 Power Supply Modes: Electric motorized display stand is suitable for USB in-line AC power, USB power bank, and rechargeable battery power (not included in the package).
  • Easy to Control: Turn on: click SR, speed is 22s/circle at this time.
  • click SR again, speed becomes 12s/circle. Turn off: click SR 3 times. Click L/R: adjust the steering.
Check Stock

SHARKS Box Weighted Hoola Hoop for Adults 24 Detachable Knots Adjustable Size Hoops Fitness Weight Loss Massage Pilates Circles for Adults and Kids Blue

  • Never drop and easy to use: Compared to conventional hula circle hoop, this hula circle hoop does not fall off and solves the problem that beginners....
  • Adjustable exercise intensity: Made of hard ABS plastic to prevent equipment aging. And different from the ordinary smart exercise hoop, The intensity....
  • Silent Bearing, Comfortable Your Movement: 3 set upgraded 360-degree silent rollers can even and flexible rotate, so that the noise is smaller and the....
  • Detachable Design Fits All Body: There are a total of 24 smart hoops with magnetic buckles, which can be freely combined to suit your waist size.The....
  • Applicable people and attentions: suitable for all adults and kids but not the elderly or baby. Before exercising, ensure the exercise hoop linking....
Check Stock

CCI IWC435-17C 17 Inch Bolt On Chrome Finish Hubcaps - Pack of 4

  • Set of 4. Phoenix USA Brand Chrome Plated ABF Plastic, Quick Trim, Trailer Hub Covers..
  • Fits 16" trailer wheels with eight 13/16" hex conical lug nuts on 6.5" bolt circle..
  • Depth of hub covers is 4". They will fit over most hubs, but not bearing buddies..
Check Stock

LESHARE Unresponsive Yoyo Professional [Responsive Bearing Included Auto Return] with Ball Bearing Mosaic Extraordinary Yo-Yos Ball Sleeper Yoyos, Red

  • DUAL FUNTIONS -Unresponsive YoyoResponsive Yoyo comes with 8 balls non-responsive KK bearings, a longer shaft, and concave bearings, changing the bearings can turn it into a responsive yoyo or a non-responsive yoyo, Unresponsive yoyo has a longer spinning time and allow you to do more funny, The non-responsive professional yo-yo is the perfect choice for professionals, beginners or anyone who wants a high-performance yo-yo..
  • 10 Ball Concave Bearing: bearing as a key part to yoyo, it's smooth and balance, with long sleep time. LESHARE X3 3-min sleeper yoyo support 1A 3A 5A tricks. And the yo-yo bearing is gold plated, so cool!.
  • Excellent Balance: Precisely made, the weight is even in every circle, feel the beauty of symmetry. More weight added on the edge so as to improve performance..
  • Professional Surface Treatment: Make LESHARE yoyos more durable, maintain glory in use. Even if you have picky taste, you'll like it..
  • About LESHARE: LESHARE is a young team of professional yoyo. With independent design, test and manufacturing, we take full devotion to every step, with aim to present a as decent as possible products to you..
Check Stock

Cougar Hydraulic Vortex RGB HPB 120 PWM HDB 120 mm Cooling Fan Included Adapter to Connect Directly 5V RGB Connection to Compatible motherboards

  • TRI-DIRECTIONAL RGB CIRCLE OF LIGHT: Every single fan is equipped with 18 RGB LEDs that deliver a powerful and bright lighting experience to the....
  • Patented Frame Design. Our patented frame design shapes the airflow into a vortex that works wonders when it comes to keeping your computer’s key....
  • SUPPORT FOR COUGAR Core Box: Control your Vortex RGB to the COUGAR Core Box (sold separately) to enjoy 100 different lighting effects and adjust them....
  • SUPPORT FOR 5V RGB CONNECTION: An included adapter allows you to connect the fans directly to the 5V RGB lighting connector of compatible ASUS,....
  • Optimized Cooling (PWM) and Hydro-Dynamic Bearing (HDB). The hydro-dynamic bearing technology brings a triple benefit: increases the fan’s useful....
Check Stock

Easy Weaver Knitting Tool, Blue Knitting Sewing Tool, Knitting Mill Machine 5.5 x 3.7inch Hand Hand-Operated Weaver Knitting for DIY Knitting Mini Knitting Machine Spool Knitter, 1pcs

  • Easy Weaver Knitting Tool : Made of high quality steel and ABS plastic, SIZE: 5.4x3.5x2.4inch/14x9.5x6cm, including 1 spool knitter, 1 load bearing clip(height:3.2inch, width:0.71inch) and 1 manual. TIPS: No extra yarn and needle, no other knitting tool..
  • Embellish Knitting Machine-----Note 1: Shake the pole with right hand, clockwise, then you must wind thread counterclockwise, and must ensure thread always tense.
  • Note 2: After thread through 1st hook, must skip 2nd hook, then through 3rd hook, and must skip 4th hook. Afterwards, there is no need to skip hooks.
  • Note 3: Ensure latch of each hooks close and open correctly, and ensure only one thread is in hook in each circle, and thread of previous circle must be ejected from the hook.
  • Easy Weaver Knitter----Note 4: After every few laps, please force pull the load-bearing clamp that clamps the rope firmly, to ensure the braided rope falls down and reduce the clutter of the thread in the machine.
  • Note 5: At the end, cut the thread at the entrance, and continue to turn the machine. After all the threads have fallen, use the thread tail to pass through the 4 holes of the braided rope tail, and then pull it tightly, you can get a nice braided rope.
  • Weaver knitting: Great for knitting spiral loop knot, fishta....
Check Stock

Timeline (Original Mix)

  • 4 x trailer 5 on 4.5" hub drum kits + 4 x 10"x2-1/4" electric brakes for Dexter and other brands 3,500 lbs trailer axle.
  • Drum Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed, Ref part #. 008-247-05, 84546.
  • Kits also includ: 4x L68149 inner cone bearings and 4x L44649 outer cone bearings, 4x Grease seals 1.719" x 2.565", 4x E Z lube grease caps with rubber plug.
  • Also include: 2 left + 2 right 10"x2-1/4" electric brakes with 3" center bore and 4" mounting bolts circle diamter.
Check Stock