ReviewsCircuit Board Holders

18V 5.0Ah 4.0Ah 3.0Ah Replacement Battery Plastic Case for Milwaukee 18V M18 M18B 48-11-1820 48-11-185048-11-1828 48-11-10 Li-ion Battery Cover Part

  • Li-ion Battery Plastic Case M18 Shell Charging Protection Circuit Board For Milwaukee 18V M18 48-11-1815 3Ah 4Ah 5Ah PCB Board.
  • only have Circuit Board(PCB) Plastic Case ,Screw, Spring (NO BATTERY).
  • Completely protection and replacement for original Battery.
  • Designed 100% compatible and easy to repair the broken circuit board.
  • Quick-responding technical support for free.
Check Stock

Engineering Notebook: Graph Paper Notebook Quadrille 4 X 4 Quad Ruled Book: 100 Pages (.25″ Lab Grid Format), 8″ x 10″ (Notebooks for Students)

  • Electrical Engineer Keychain, Circuit Board Keychain, Electronic Engineering, Computer Engineering, Gift for PCB Printed Circuit Board Design Engineer, Electrical Engineer, Engineer Teacher, Engineer Graduation Gift.
  • Engineer Charm, Circuit Board Charm, Computer Charm, Electric Plug Vector Charm.
  • Diameter of Key Ring : 1.38 Inches (3.5 cm).
  • Length of Keychain : 2.95 Inches (7.5 cm).
  • Free velvet gift bag to pack and ship our keychain.
Check Stock

Engineer Keychain Circuit Board Keychain Electrical Engineer Gift Electronic Design Engineering Computer Engineering Computer Laptop Charms Engineer Teacher Gift Engineer Student Graduation Gift

  • Electrical Engineer Keychain, Circuit Board Keychain, Electronic Engineering, Computer Engineering, Gift for PCB Printed Circuit Board Design....
  • Engineer Charm, Circuit Board Charm, Computer Charm, Electric Plug Vector Charm.
  • Diameter of Key Ring : 1.38 Inches (3.5 cm).
  • Length of Keychain : 2.95 Inches (7.5 cm).
  • Free velvet gift bag to pack and ship our keychain.
Check Stock

Sony PLAYSTATION 3 80GB PS3 System

  • IMPORTANT - Must check original model number on laser lens/ carraige before purchasing..
  • New and Original Sony Part. Circuit Board is not included as the drive only works with the original board..
  • Model: KES-410A/ KES-410ACA/ KEM-410A/ KEM-410ACA. Inside most 160GB and some 40GB/ 80GB fat models..
  • Installation requires the drive to be installed with the original Metal Case and Circuit Board..
  • Nextec 1 Year Replacement Warranty and Free After Sales Support included with your purchase..
Check Stock

4 in 1 Internal USB Splitter Cable Electop 9 pin USB Header Male 1 to 4 Female Extension Connector Adapter USB 2.0 HUB Connector Port Multiplier PWM Fan Splitter Cable 30cm/0.98ft

  • Product Type: 9 Pin, Main board USB 2.0 Male 1 to 4 Female.
  • Wide Applications: It can be widely applied to Host DIY Light Bar, Host Fan ,Extended USB Interface ,Other 9 pin USB 2.0 Support Devices..
  • Prevent Short-circuit: Prevent short circuit outlet design.To prevent accidental removal of circuit board,pins in case short circuit..
  • Easy Installation:Wire belt shielding,with 3M adhesive back glue, can be directly fixed on the main board or chassis..
  • Package Includes: 1* 9Pin USB Header Male 1 to 4 Female Extender,Cable Length(approx.) 30cm(11.8 Inch).Any questions,feel free to contact us via....
Check Stock

PCE Universal USB Game Joystick Circuit Board, Arcade Rocker Circuit Board Controller Control Board Assembly Support Laptop For Windows 98/ME/XP/Vista

  • 【High Standard】This joystick circuit board is formed without deformation, and the cutting surface has no burrs, which meets the standard..
  • 【High Performance】Solder joint does not stick, no virtual welding, full, smooth, work with high performance. The surface of the circuit board is very clean, the handwriting is clear, easy to recognize..
  • 【Newest Technology,】This arcade rocker arm circuit board uses the latest technology, the entire network's unique Accuracy technology SMD electronic board. Product is better..
  • 【Plug and play】Plug and play, do not need to install the driver. High Accuracy material, environmental protection, fire resistance, high temperature, deformation resistance..
  • 【After Sales Service】If there are any using problems or unsatisfactory with our products, please feel free to contact us, our professional customer service team will consult the issues with sincerity. Thanks for purchasing from us..
Check Stock

Dashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board

  • MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
  • SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
  • TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
  • APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
  • Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....
Check Stock

WSDMAVIS 1Set Ceramic Discs Mist Maker Atomization Plate with 5V Mini USB Humidifier Module Integrated Circuit Board Driver with Timing Switch DIY

  • High frequency oscillation,more finer particles,large and stable atomization amount, timing shutdown..
  • USB humidifier special micro hole atomization film, surface anti-oxidation silver layer protection coating, the front side is white piezoelectric ceramic ring, the back is all steel material, waterproof solder joint, to prevent open circuit..
  • Diameter of outer silicone ring: about 20mm.
  • Our atomizer plate with 5V frequency driver board, it is more convenient compared with other product. You can start the board via the button after power the module.The atomizer plat should be used with the same frequency circuit board so as to achieve the ideal spray volume..
  • Please refer to the picture for the detailed information of the circuit board structure diagram, wiring diagram and atomizer size diagram..
Check Stock

Sterilite 06368004 White Small Ultra Sink Set 2 Piece

  • Angled drain board design allows excess water to drain easily into the sink.
  • Oversized flatware holders, perimeter cup holders and a unique system of channeled grooves that hold dishes securely in place.
  • Snap-lock tabs securely hold the drain board and dish rack together and disengage for easy cleaning.
Check Stock

Aboofx 12 Pack Wood Place Card Holders Wood Table Number Stands Picture Holder Acrylic Sign Holders for Wedding Dinner Home Party Events Decoration

  • Package Incudes: A set of 12 pack wooden card holders.
  • Size about 7 x 3.5 x 1.8 cm / 2.75 x 1.38 x 0.71 inch, slot size(wide x depth) 0.32 x 0.8 cm / 0.13 x 0.31 inch. Please note that all table signs shown in the pictures are NOT included.
  • Quality Material: The wood sign holders is made of pine wood, which is carefully selected, strong and durable. And after multiple processes of polishing, the surface is smooth and there is no wood chips.
  • Reliable: The base can hold up to 4 to 5 cards, and it can well support the 5 x 7 inch acrylic board without tipping. Note: The acrylic board is bigger than 6 x 8 inch maybe not suitable.
  • Elegant Design: The wood acrylic sign holder is simple and beautiful, exquisite design, stable while not taking up too much desktop space. It suitable for many occasions, cafes, restaurants, kitchens, offices, banquets, parties and etc..
  • Widely Application: The wood place card holders can serve as place card holders, small table sign holders, menu card holders or photo display stands, you can use it in Memorial Day, Halloween, Christmas, wedding or other meaningful events.
Check Stock

DORHEA 3 Set Electronic Flashing Lights Soldering Practice Board LED NE555 CD4017 IC LED Electronic Lights Kits Red Blue Dual-Color DIY Kit Strobe Electronic Suit Flashing Lights Components DIY

  • The circuit working voltage: DC9-12V. The product does not include battery. It is simple to make, has obvious effect and is interesting. The circuit can be used for electronic toys, art lighting, LED billboards ,ect..
  • This suite adopts simulation light circuit made with NE555 and CD4017, the blue LED and red LED flashed alternately according to the pulse. The multivibrator composed of NE555 will have a certain frequency of oscillation signal send to CD4017 decimal counter/pulse distributor, in order to count..
  • This is a very interesting circuit for simulating the visual effects of warning lights, blue and red lights flash alternately according to the pulse respectively. This kit is simple to assemble, suitable for electronics enthusiasts and students to practice. Design optimized for training, it adopts 1.6mm electric board and nice layout of the components..
  • Specially designed for the training, cost-effective, red diodes and blue diodes can be opened with wire connections to expand the lamp distance, the original board number and model on the circuit board, the right seat can be installed..
Check Stock