ReviewsCircuit Board Support

Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer

  • 1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not for V1) 3D printer.
  • 2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level.
  • 3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock..
  • 4.Direct drive extruder, great support for flexible filament..
  • 5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase..
Check Stock

BRECKWELL Circuit Control Board Panel P20 P26 P23 P23i P24 P24i A-E-301

  • Breckwell Circuit Control Board Panel Module, P20, P23, P23i, P24, P24i, P26, P32i, P2000, P2000i, P2700, Part# C-E-301 | A-E-301.
  • Replacement digital 4 RPM circuit board / control panel for most Breckwell pellet stoves made before 2002. Fits the following Breckwell pellet stove....
  • Genuine Breckwell OEM Replacement Circuit Control Board.
  • Guaranteed Newest Stock and Latest Inventory.
  • Please ensure you require this control board prior to ordering. We are unable to return circuit boards that have been installed or used in anyway. Be....
Check Stock

Dometic (3316348.900) Power Module Board

  • CIRCUIT BOARD – Circuit board designed for RV refrigerator..
  • EASY FIX – Replace your circuit board and spare yourself the expense of buying a new refrigerator..
  • DESIGNED TO FIT – Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)..
  • WARRANTY – Comes with full manufacturer warranty..
  • LIGHTWEIGHT – Weights less than 1 pound..
Check Stock

PANAVISE 324 Electronic Work Center

  • Includes a 315 Circuit Board Holder, a 300 Standard Base, a 312 Parts Tray Base Mount, and a 371 Solder Station.
  • Circuit Board Holder Tilts 90 degrees, Turns 360 & Rotates 360.
  • Single control knob and exclusive split-ball locks the Circuit Board Holder firmly into place.
  • Height: 13.5-Inch (342.9mm) Weight: 4.5 lbs. (2kg).
Check Stock

youyeetoo Tinker Board 2S AI Single Board Computer, 4GB RAM 16GB eMMC Support 4K Dual Display , onboard WiFi Bluetooth HDMI DP DSI Android 10 Debian 9

  • [ULTIMATE PERFORMANCE FOR IOT DEVICES] Tinker Board 2S is a single board computer base on RK3399 an Dual 2.0 GHz Cortex-A72 and Quad 1.5 GHz Cortex-A53, GPU Arm Mali-T860.
  • [WI-FI AND BLUETOOTH] Tinker board 2S use 802.11ac Wi-Fi with 2x2 dual-band 2.4/5 GHz antennas deliver transfer speeds. Integrated Bluetooth also opens up the convenience and freedom of wireless connectivity with a wide range of devices, including speakers, headphones and game controllers..
  • [RICH CONNECTIVITY: USB 3.2 GEN 1]Tinker Board 2S has three USB 3.2 Gen 1 Type-A ports and one USB 3.2 Gen 1 Type-C (USB-C) port, for data-transfer speeds that are up to 10X faster than USB 2.0 - plus the convenience of any-way-up connectivity..
  • [DUAL-DISPLAY SUPPORT] Tinker Board 2S supports dual displays at up to 4K UHD resolution, so it's equipped for compelling visual output. It also has three popular display interfaces built in, including HDMI, DisplayPort over USB-C and DSI, for superb flexibility..
  • [EXPANDABILITY FOR EMBEDDED SOLUTIONS]1. RTC battery header 2. SD card slot (rear side) 3. Fan connector.
  • [COMPREHENSIVE PROTECTION] 1. Short-circuit damage prevention 2. Electrostatic discharge protection 3.Overvoltage protection World-class circuit-protecting power design.
Check Stock

Yasoca XT60 Lipo Battery Charger 2-6S Parallel Balanced Charging Board Charging Plate for Imax B6AC 720i Lithium Batteries Charger Part

  • 1) XT60 Parallel board for lipo balance charger, such as imax b6 b8 b6ac, una6, and other balance chargers.
  • 2) Save your time: which lets you charge and balance up to six lipo batteries at the same time.
  • 3) Support max six 2-6s batteries sets: features 4mm bullet banana plug for your batteries' main leads and jst-xh balance plugs ranging from 2s to 6s.
  • 4) Prevent short circuit: built-in short circuit protection, prevent each cell when overcharge or short circuit happens.
  • 5) Super strong expansion ability: it can support combined use for three parallel ok boards (it means you can charge eighteen batteries which have the same characters at the same time).
Check Stock

ACEIRMC 5pcs 4A 2S 18650 Lithium Protection Board BMS Li-ion Battery Lipo Cell Charger Protection Module Overcharged Overcurrent Protection 7.4V 8.4V

  • Upper Limit Operating Current:4A.This protection board uses a lithium photopolymer rechargeable battery protection IC..
  • Built-in high-precision voltage detection circuit.
  • The terminal connected to the charger is a high withstand voltage device.
  • Built-in three-stage overcurrent detection circuit (overcurrent 1,overcurrent 2,load short circuit)..
  • 4A BMS 2S 2 Cell Series Li-ion 18650 Lithium Battery Charger Protection Board 7.4V DIY Kit Electronic PCB Board Module.
  • Function:Overcharge protection,over discharge protection,short circuit protection,overcurrent protection..
  • Package included: 5 x 2S 4A 18650 Lithium Protection Board..
Check Stock

Circuit Board Holder - Adjustable 360°Degree Flipping with Magnifying Glass For Clamping PCB Soldering Desoldering and rework AB-22

  • Flame Retardant Material: The soldering helper helping hands soldering station is made of aluminum alloy, the base is iron base and stainless steel,....
  • Circuit Board Holder: The circuit board holder with 2 arms (L=12.2 inch) and a magnifying lamp, the lamp with 42pcs 5W LED light, 3 color modes....
  • Solid Base: The base is solid and heavy with high quality paintwork, the riser arms are aluminum. It can clamp the big boards, L=11.81''..
  • Easy to Install: The third hand circuit board holder is easy to install, quick to insert and remove. The third-hand soldering station comes with 2....
  • What You Get - 1 x Iron Base, 1 x Circuit Board Holder, 1 x Magnifying Lamp, 2 x Arms. If you have any questions, you can contact us at any time, and....
Check Stock

10PCS CNY70 Reflective Optical Sensor with Transistor Output

  • On-board PAJ7620U2 Chip, can directly recognize 9 basic gestures: Up, Down, Left, Right, Front, Back, Clockwise, Counterclockwise, and Swing..
  • On-board level shift circuit, compatible with 3.3V / 5V logic level, Support I2C interface communication..
  • Built-in infrared LED and optical lens, can work in low light and dark environment..
  • Suitable for smart home, office teaching, robot interaction, gesture toys, somatosensory game equipment,ect..
Check Stock

Physics for Computer Science Students: With Emphasis on Atomic and Semiconductor Physics

  • Electrical Engineer Keychain, Circuit Board Keychain, Electronic Engineering, Computer Engineering, Gift for PCB Printed Circuit Board Design Engineer, Electrical Engineer, Engineer Teacher, Engineer Graduation Gift.
  • Engineer Charm, Circuit Board Charm, Computer Charm, Electric Plug Vector Charm.
  • Diameter of Key Ring : 1.38 Inches (3.5 cm).
  • Length of Keychain : 2.95 Inches (7.5 cm).
  • Free velvet gift bag to pack and ship our keychain.
Check Stock

Lenboes Blu-ray Disk Blu-Ray DVD ROM Drive for Sony PS4 CUH-1215A CUH-1215B CUH-12XX with TSW-001 PCB Board - Free Tool

  • IMPORTANT - Must check original model number on drives Circuit Board before purchasing, see image for guide..
  • Drives are from new consoles split for parts, outer casing may show some minor cosmetic marks from storage..
  • Model: KES-456A/ 496. Inside some CUH-1215A CUH-1215B Console.
  • Installation requires the drive to be installed with the original Circuit Board as this is married to the console..
  • Nextec 1 Year Replacement Warranty and Free After Sales Support included with your purchase..
Check Stock