ReviewsCircular Angle Measurement Tool

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....

Check Stock

Stair Tread Template Tool, Stainless Stair Tread Gauge Tool Shelf Stair Jig Layout Tool Box, Measuring Gauge Range 10.2in to 53.3in, Suitable for Complex Stair Treads by AnoleX

...mplate tool provides the greatest help when you install the stairs, it can measure the length and width of the stair treads, and it can also measure the rotation angle of the spiral staircase. In addition, this stair gauge can also be used for deck floors, wall frames, window sills, shelves, closets, partitions for measurement and angle placement..
【Flexible Use】Stair tread gauge tool with three sizes of 8&12&16 inches extension rod, can slide and adjust in the range of 10.2 to 53.3 inches. The 10 inch stainless steel plates on both sides with scale and angle measurement (0° to 360°) can be combined and stretched arbitrarily according to your needs to meet the measurement of different corners. The stair ruler is easily adjusted and securely locked in place with four knobs..
【Sturdy Material】The stair measurement tool is made of 304 stainless steel scale plate and is covered with chemical-resistant environmentally friendly coating materials, which can effectively prevent moisture or rust, and it will not wear for a long time, and it is strong and durable..
【Precise and clear scale】The clear radium engraving on the surface of the stair tread and shelf gauge will not fade after long-term use. All scales are strictly inspected and calibrated b....

Check Stock

Lind Kitchen Technical Drawing Circle Templates, Circle Round Stencil Template Artist Design Drawing Aid Tool, Yellow

The scale is clear and bright, and the measurement is accurate. The front scale and fine printing process are adopted. Each size is clearly printed, which is durable and avoids wear and tear. It has achieved long-term use..
It has more transparency, luster and impact resistance, comprehensively improves the toughness and strength of the formwork, and makes the formwork more practical and not easy to be damaged. Rich graphics help children's imagination, which is very convenient for drawing and measurement..
Multifunctional circle drawing template, circle drawing template with different diameters, circle drawing is more convenient and accurate. The drawing is smooth and seamless, and the drawing is more beautiful..
Smooth and delicate cutting, no flash, smooth cutting, smooth straight line and arc. Sharp angle smooth grinding, safer.
The right angle edge shall be polished smoothly without hurting hands..
Easy to store: 1 drawing template, the size is just suitable for putting into the backpack, which is very convenient to carry, and can meet your different needs of daily use and measurement in work mode or school project. Widely used: these templates are suitable for architecture, mathematics, network technology, score measurement, art design or school le....

Check Stock

Carbon Brushes 999038 for Hitachi Power Tool Motor

Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
Carbon motor brushes are one of the most components for power tool like electric drill..
Worn brushes are often the cause of a poorly running motor.
Replacing brushes can fix an intermittent motor..
New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..

Check Stock

MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)

MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....

Check Stock

RISEPRO 10-Inch Digital Torpedo Level and Protractor IP54 Protected Electronic Bubble Inclinometer, Angle Finder, Gauge w/Large VA Display & V-Groove Base DL135N

RELATIVE OR ABSOLUTE ANGLE MEASUREMENT - The regular absolute measurement mode can measure the angle against horizontal plane. This tool also features with relative measurement mode for quickly measuring angle between two measured surfaces..
EASY READABLE VA DISPLAY & SWITCHABLE UNITS – Clear and bright VA display allows you to use this device in the dark without light. Display modes can be converted from degrees (') to percent (%), to (mm/m), to pitch (IN/FT)..
STRONG MAGNETIC V GROOVE BASE & HOLD FUNCTION - The V Groove base with strong magnets enables strong attachment over a curve or cylindrical magnetic surfaces such as metal pipeline or shafts. Hold function helps save the current angle on the display..
SMART AUDIBLE BUZZER - This inclinometer has beeper sounds feature at horizontal position (0°) or vertical position (90°) which makes you more convenient and easier when it is in use. You can also listen it where you are unable to see the display..
WIDE APPLICATIONS – Great tool for automotive, wood & mechanical industries, machinery, medical fields....

Check Stock

324 Ft Electronic Digital Tape Measure with LCD Display Digital Ruler Rechargeable Small Smart Long Distance Rolling Measuring Tool for Flat Curved Diameter Odd Shape High Precision Ideal Gifts

Multi Measuring - Linear measurement, circular measurement, arbitrary curve measurement, irregular surface measurement, cylindrical diameter measurement, accumulation/subtraction of 10 historical records, measurement prompt sound, measurement breathing light , Unit switching. Easy to cover your daily measurement needs..
Rolling Electric Tape LCD Digital Screen - Rolling whatever you need to and you would easy to read the result from the LCD. Worry free from the tiny graduation on traditional rulers, good for tailors, students, seniors..
324 Ft Long Measuring Tool - The digital tape measure ruler supports single range 0-29.5 feet distance measurement, cumulative distance measurement can be up to 324 feet.
Hi-tech Microprocessor and Precision Encoder - Those 2 parts ensure you a ± 0.5% result, this is very helpful for E-commerce when calculating the dimension weight for shipping cost..
Light Weight and Pocket Size - 35g, Dia 2.09*0.6 inches.

Check Stock

General Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer

【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..

Check Stock

Hitachi 49C60 LVDS Cable Ribbon (Main Board to Panel)

Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
Carbon motor brushes are one of the most components for power tool like electric drill..
Worn brushes are often the cause of a poorly running motor.
Replacing brushes can fix an intermittent motor..
New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..

Check Stock

SUNREEK Wood Sculpture Carving Chisel Tool Set DIY Art Craft(8 Pcs)

Total Length:147mm/5.8 inch(Handle 25mm/0.9 inch).
Elbow arc knife:12mm, Flat knife: 17mm, Flat large arc knife: 18mm, Bevel knife: 17mm.
Round mouth big arc knife: 18mm, Small circular knife: 7mm, Big circular knife: 9mm, Angle knife: 6mm.
Package included: 8PCS x Wood Carvers Tool.

Check Stock

MiLESEEY Laser Measurement Tool 200ft, Curved Surface Measurement with Wheel, Digital Tape Measure, Pythagorean, Distance, Area and Volume Point to Point Measurement with Laser Line Marking Function

3 IN 1 LASER MEASURE: Not only a laser tape measure, but also built-in smooth wheel to measure curve surface & columnar items, measure arc length easily without complicated calculate, save your time. With a built-in Gyroscope Chip, R2B laser tape measure has advanced Point-to-Point (P2P) measurement technology. It will compute the distance between two points, regardless of height or angle..
LASER LINE MARKING & ANGLE SENSOR: Long press to enter the laser line marking function, mark the red laser line on the target, the real-time angle of laser line is displayed on the screen, and it varies with the angle of device. It can provide us with collimated indicator lines for manufacturing, industry, construction. It can also automatically measures the angle due to the built-in electronic angle sensor. It will help you complete measurements quickly and accurately..
50 GROUPS DATA MEMORY & LARGE LCD COLORED BACKLIGHT: This laser measure provides accuracy up to ±1/16 In., and remembers the last 50 measurements taken. With backlight LCD Colored screen, it provides you better visibility in dark areas. MiLESEEY laser measurement tool is safe, laser class 2 and laser tape 635nm .

Check Stock