ReviewsCitation Bars

Brass Clutch Badge Insignia Clutches Pin Backs Replacement (Gold, 50 Pieces)

• Material: the small clutch is made of quality nickel plated brass.
• Unnoticeable while lock pins firmly and keep them secure.
• Metal material makes it anti-wear, sturdy.
• Package contents: each clutches pin size is approximately 10 mm in diameter, packaged in clear plastic case for neat storage.
• Quantity are enough for replacement to your torn or lost one.
• Exquisite design:clutch pin backs are great match for most metal pin.
• clutch provides good grip of pin to keep it stay in place.
• With its firm and protective grip, rest assured that you will never lose another pin again.
• Easy to use: featuring a spring-loaded fastener, these pin backings are easy to put on and take off.
• Simply push to secure onto pin post and pull the trigger while holding onto your pin to release.
• These locking pin backs are a great alternative to rubber clutches.
• Wide usage: the metal pin back can be applied with tie tacks and lapel pins that have lost their backings, or with your own homemade craft pins.
• Can also be applied as the back of lapel pins, hat, tie tacks, name tag, toy pins, citation bars, service bar, etc..

100 Pcs Silver Safety Pins 1 Inch Pin Back Clasp Brooch Pins Backs with 3 Holes Safety Locking for Making Corsage, Name Tags, Badges, Citation Bars

• Size —— The package including 100(±2%) pieces brooch clasps, each flat brooch pin sizes approximately 0.98 inches long..
• Robust and secure — Bar pin brooch clasp is made of iron. Stainless steel plated, not easy to rust and damage.
• and these are incredibly sturdy and secure..
• Smooth to Fasten & Secure — These pin backs with locking function and have clasps that are reasonably easy to open and shut, securely fixed..
• Easy to Attach — These brooch pins backs with 3 holes and are flat on the back.
• Pin backs can be glued or directly onto any surface to DIY crafts..
• Widely Used —These bar pins are excellent for making brooches or replacement to your torn or lost one.
• And be applied to tie tacks, badge insignia, citation bars, name tag, etc..

2 Sets Women Beaded Lanyard with ID Holder Retractable Badge Reel Stainless Steel Chain Necklace with 2 Water Resistant Name Badge Holder Clip (Rose Gold)

• Pin back with 2 holes, easy to open and close, You can stick decorative crafts with glue, or sew the hole directly. Easy to attach, good for attaching beads, dangles and various jewelry findings to create an unique and personalized ornaments. Not easy to drop and fall apart..
• These safety pins clasps are great for making handmade jewelry pins, brooch pins, costume jewelry, name tag pins, flower pins, toy pins, bottlecap pins, diaper pins, corsages, ribbons, boutonnieres, hair clips, citation bars, unique and personalized ornaments, etc. Ideal for wedding ,baby shower, bridal shower, Christmas, etc..
• Ideal for DIY craft project,  jewelry crafting, sewing fabric. Can be worn on  shirt, t-shirt, coats, sweaters, hats. or attach it to your backpack for personalized decoration..
• Package includes: 30pcs * brooch safety pin backs clasps..

Bar Pins Brooch Clasp Pin Backs Safety Pin 120 Pieces Silver for Name Tags, Badges (4 Sizes 20mm 25mm 32mm 38mm)

• DIMENSIONS: Silver tone bar pin backs that come in 4 sizes: 0.75 Inch (20mm), 1 Inch (25mm), 1.25 Inch (32mm) and 1.5 Inch (38mm). Each set comes with 30 pieces of each size, for a total of 120 brooch clasps in a plastic box..
• DURABLE: Made from iron metal with a strong nickel plating to ensure long lasting durability. Sturdy, secure and will not fall apart or rust easily..
• EASY TO USE: Bar pins have flat backs with 2 or 3 holes so you can sew or glue them on. Safety pin backs have a clasp, which makes attaching and detaching a breeze..
• MULTIPURPOSE: Great for jewelry making, DIY crafting, sewing or corsage making. Perfect replacements for lost or damaged brooch pins on name tags, insignia badges, citation bars and more!.
• 100% SATISFACTION GUARANTEE - Purchase with confidence! We stand by our products and offer a 30 day money back guarantee, no questions asked!.

Shapenty 30PCS Locking Pins Backs Safety Clasp Brooch Badge Bar Jewelry Pins for DIY Craft Name Tags Toy Ribbon Corsages Costume Jewelry Making Sewing Felt Fabric Baby Shower Wedding (Silver, 25MM)

• Pin back with 2 holes, easy to open and close, You can stick decorative crafts with glue, or sew the hole directly. Easy to attach, good for attaching beads, dangles and various jewelry findings to create an unique and personalized ornaments. Not easy to drop and fall apart..
• These safety pins clasps are great for making handmade jewelry pins, brooch pins, costume jewelry, name tag pins, flower pins, toy pins, bottlecap pins, diaper pins, corsages, ribbons, boutonnieres, hair clips, citation bars, unique and personalized ornaments, etc. Ideal for wedding ,baby shower, bridal shower, Christmas, etc..
• Ideal for DIY craft project,  jewelry crafting, sewing fabric. Can be worn on  shirt, t-shirt, coats, sweaters, hats. or attach it to your backpack for personalized decoration..
• Package includes: 30pcs * brooch safety pin backs clasps..

Shapenty 30PCS Locking Pins Backs Safety Clasp Brooch Badge Bar Jewelry Pins for DIY Craft Name Tags Toy Ribbon Corsages Costume Jewelry Making Sewing Felt Fabric Baby Shower Wedding (Silver, 20MM)

• Pin back with 2 holes, easy to open and close, You can stick decorative crafts with glue, or sew the hole directly. Easy to attach, good for attaching beads, dangles and various jewelry findings to create an unique and personalized ornaments. Not easy to drop and fall apart..
• These safety pins clasps are great for making handmade jewelry pins, brooch pins, costume jewelry, name tag pins, flower pins, toy pins, bottlecap pins, diaper pins, corsages, ribbons, boutonnieres, hair clips, citation bars, unique and personalized ornaments, etc. Ideal for wedding ,baby shower, bridal shower, Christmas, etc..
• Ideal for DIY craft project,  jewelry crafting, sewing fabric. Can be worn on  shirt, t-shirt, coats, sweaters, hats. or attach it to your backpack for personalized decoration..
• Package includes: 30pcs * brooch safety pin backs clasps..

Lapel Pin Backings,Butterfly Clutch Pin Backings PVC Rubber Pin Backs Pin Keepers for Replacement Uniform Badge (Black, Pack of 50)

• Nice packing-Rubber backs are packed in a transparent plastic box,Each box contains 50pcs rubber pin backers. Pin Locks suits for lapel pins, badges, hat, tie tacks, name tag, toy pins, citation bars,etc..
• Super practical-These PVC rubber pin backs are totally awesome! because they keep the pin from moving around.The soft rubber pin back effectively isolate sharp metal pins and ensure they remain in place，Great replacement for pin clutch backs..
• If you wear lapel pins on the reg. Throw away the metal backs that don't grip and replace them all with these rubber backs that won't fall off, leaving your pin lost on the ground somewhere. They have great grip, and don't loosen with time..
• the PVC pin back is tight and they are not easy to fall off.
• Each pin back has a hole which is compatible with the tie tack pin，The rubber pin backs are only compatible with the pin 1-1.2 mm in thickness, it can't fasten if the pin is too slim..
• Put the pin in the rubber pin backing, your items will keep pinned securely. With smooth opening and closing, yet the pin back clasp is well secured because of the pin backs locking feature.If there is any problem or these Pin backings does not fit your, just contact we will return full refund to you..

Pin Backs, Selizo 84pcs Locking Pin Backs Lapel Push Pin Keeper Blank Pin Locks for Disney Pins, Lapel Pins, Enamel Pins, Brooch Pins and Hat Pins (Assorted Styles)

• ...ial that are strong and sturdy to hold and hard to break. While the rubber blank pins are made of PVC rubber that are durable and comfortable to use.
• WIDELY APPLICATIONS: Our pin holder set are great choice to use with brooches, name tags, hat pins, pin badges, lapel pins, enamel pins, homemade craft pins, toy pins, citation bars, service bar, etc. They also can be used for holding tie tacks and display books.

ICON Fender Skirt, Tandem, Thor Citation, FS780, Polar White

• Fits various Thor brands including: Citation, Jazz, Summit, Sonoma, Tahoe, Vortex, Wave, Wanderer. Also fits various Eclipse RV brands including: Attitude. Also fits various Coachmen brands including: Chaparral..

Centric 603.61014 Idler Arm Bushing

• Thunderbird, Custom 300, Galaxie, Montclair, Marathon, Crestline, Mainline, Pacer, Ranger, Superba, Medalist, Deluxe, Corsair, Customline, Park Lane, Turnpike Cruiser, Citation.
• Centric Offers complete onsite testing and quality control.
• Centric manufacturers quality parts for most vehicles sold in the US over the past 70 years.

A Thousand Falling Crows