ReviewsCladding Metal

Mortairvent 202 6mm (200 sq. ft.)

95% open design creates a continuous capillary break and channel for moisture to drain, accelerating drying of the exterior cladding..
Simple and quick to install. Easier and more cost effective than traditional furring strip methods..

Check Stock

Turtle Wax T-125 Premium Grade Trim Restorer - 10 oz.

Use on plastic trim, body cladding, window seals, molding, plastic wiper arms, door handles, tonneau covers and more.
Instantly restores dull, faded trim and body cladding to original appearance and protects against future fading.
Provides an invisible protective barrier that prevents staining caused by contact with waxes and polishes.
Can be used on any color plastic trimcolor plastic trim.
Long lasting formula will last up to 3 months.

Check Stock

FiberCablesDirect - 3M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dx Yellow Zip-Cord PVC ofnr lc-lc

Fiber Patch Cable Details: 3 Meter (9.84 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Mode Type: OS2 (9/125 Singlemode) – 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..

Check Stock

FiberCablesDirect - 0.5M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 0.5 Meter (1.64ft) | Length Options: 0.5M-300M | 1g 10g sfp+ 10gbase lc/lc dplx Yellow PVC ofnr lc-lc

Fiber Patch Cable Details: 0.5 Meter (1.64 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Mode Type: OS2 (9/125 Singlemode) - 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..

Check Stock

FiberCablesDirect - 1M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dplx yellow zip-cord pvc ofnr lc-lc

Fiber Patch Cable Details: 1 Meter (3.28 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Mode Type: OS2 (9/125 Singlemode) - 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..

Check Stock

For Chevy Avalanche 1500/2500 2002 03 04 05 2006 Quarter Panel Driver and Passenger Side | Pair | Front | Lower Section | With Side Body Cladding

Manufacturer Part Number: 672-57L, 672-57R.
LH QUARTER PANEL FRONT SECTION LOWER Compatible with Chevy AVALANCHE (WITH SIDE BODY CLADDING) 02-06 | RH QUARTER PANEL FRONT SECTION LOWER Compatible with Chevy AVALANCHE (WITH SIDE BODY CLADDING) 02-06.

Check Stock

SC Fiber Attenuator Male/Female Singlemode 20DB | SC/UPC Male to SC/UPC Female Fixed Single-Mode Attenuator | FiberCablesDirect | sc m/f sm attenuator 20Db

SC-SC UPC Male/Female fixed attenuator for singlemode applications to prevent over saturating an optical receiver when the optical power is too high. Using an attenuator ensures low bit error rates preventing damage to receiving fiber optic equipment..
Core / Cladding: 9/125µm - Singlemode attenuator has a 9 micron diameter fiber core and a 125 micron diameter cladding.
Mode Type: Singlemode 9/125um Attenuator.

Check Stock

WeldingCity 10-pcs Titanium TIG Welding Rods ERTi-1 (Grade-1) 1/16' x 36' | Pack of 10-pcs

PRODUCT: package of 10-pcs and 1-lb -premium quality ERTi-1 (Grade-1) Titanium TIG welding rods with available diameters 0.035", 0.045", 1/16", 3/32" and 1/8".
acid-pickled surface to fully remove contaminants.
APPLICATIONS: where ductility is paramount, such as explosive cladding, loose linings, expanded metal, and deep drawing applications..
PACKAGE: 10-pcs and 1-lb of ERTi-1 Titanium TIG welding rods. With volume discount. Buy More Save More!.
U.S. BASED welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

Legend 3 Ply Stainless Steel Cookware Set | 12 Piece Best Tri Ply Pots and Pans Set | Professional Quality Clad Pan & Pot Cook Sets All Kitchen Surface Induction & Oven Safe | PFOA PTFE & PFOS Free

STAINLESS STEEL PROFESSIONAL GRADE COOKWARE SET: Legend Cookware stainless steel pots and pans set combines the epitome in rapid heating, heat....
GENUINE MULTIPLY CLADDING TECHNOLOGY: Our signature MultiPly cladding technology produces the highest-performing 3 ply cookware set in your kitchen.....
DISHWASHER & OVEN SAFE: This 430 stainless steel cookware set gives you a real sense of strength as it offers long-term use to achieve healthy and....
THE PACKAGE INCLUDES: The 14-piece stainless steel pan set includes an 8-quart stockpot with lid.
LIFE-LONG WARRANTY: While Legend Cookware stainless steel cookware sets for home & kitchen are intended to last a lifetime, our promise lasts even....

Check Stock

Legend 5 Ply 14 pc All Stainless Steel Heavy Pots & Pans Set | Professional Quality Cookware 5ply Clad Home Cooking & Commercial Kitchen Surface Induction Oven Safe | Non-Teflon PFOA PTFE & PFOS Fre

...bber. To maintain luster, polish with water and a mild acid, like vinegar or lemon juice. Dishwasher safe, but to maintain the visibility of interior measurement lines, handwashing is best. Stainless steel requires no special handling, unlike cast iron, pure copperware, enameled and nonstick clad cookware..
MULTIPLY CLADDING TECHNOLOGY. MultiPly cladding technology produces the highest-performing 5 ply stainless steel cookware set in your kitchen. Each layer of premium metal serves a purpose: 304 stainless steel for safe, easy-clean cooking.
and 430 stainless steel for performance on all cooktops. Heat distribution to handles may occur over long periods of high temperature cooking. Make sure to use a potholder when grasping handles..
VERSATILE IN AND OUTSIDE THE HOME. The 5 Ply Stainless Steel Cookware can be used with any kitchen setup: electric, gas, glass, or induction. It can go from stovetop to oven, for true one-pot meal cooking. You can even take it along for cookfire camping or tailgate grilling. Includes: 8-quart stockpot.

Check Stock

Mophorn AI-9 Fiber Fusion Splicer with 5 Seconds Splicing Time Melting 15 Seconds Heating 7800mah Fusion Splicer Machine Optical Fiber Cleaver Kit for Optical Fiber & Cable Projects

【3 IN 1 FIBER HOLDER】- SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable. Applicable Fibers:SM(G.652&G.657).
NZDS(G.655). Splice Loss: 0.025dB (SM), 0.01dB(MM) 0.04dB (DS/NZDS). Coating Diameter：100-1000μm, Cladding Diameter：80-150μm..
【5” TFT DISPLAY】- It adopts 5-inch 800x480 high-resolution screen, and the operation graphics are simple and intuitive which ups to 300 times focus amplification. Once splicing times reach from 48000-60000 times, free to change a new machine.
【BUILT-IN POWER METER & VFL】- Using the latest core alignment technology with auto-focus and six motors. It is more precise and less splicing loss than cladding alignment technology. Effectively measure connection loss,verify continuity and help assess fiber link transmission quality..
【7800MAH LITHIUM BATTERY】- 7800 mAh high-capacity lithium battery, charging time ≤ 3.5 hours,continuous splicing and heating about 200 times..
【USED BROADLY】- This Intelligent and convenient machine can be connected to mobile app, and supports ten languages: English, French, Russia, Italian, Portuguese, polish, Spanish, Thai, Arabic. It is especially suitable for optical fiber and cable projects, maintenance scientific research, railwa....

Check Stock