ReviewsCladding Plate

FiberCablesDirect - 3M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dx Yellow Zip-Cord PVC ofnr lc-lc

  • Fiber Patch Cable Details: 3 Meter (9.84 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) – 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
  • Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..
Check Stock

FiberCablesDirect - 0.5M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 0.5 Meter (1.64ft) | Length Options: 0.5M-300M | 1g 10g sfp+ 10gbase lc/lc dplx Yellow PVC ofnr lc-lc

  • Fiber Patch Cable Details: 0.5 Meter (1.64 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) - 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
  • Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..
Check Stock

FiberCablesDirect - 1M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dplx yellow zip-cord pvc ofnr lc-lc

  • Fiber Patch Cable Details: 1 Meter (3.28 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) - 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, sfp data services supported. ISO / IEC 24702.
  • Durable Commercial Grade Construction, Cost Effective and Built to Last | 100% Lifetime Warranty On All Products Purchased From Fiber Cables Direct..
Check Stock

For Chevy Avalanche 1500/2500 2002 03 04 05 2006 Quarter Panel Driver and Passenger Side | Pair | Front | Lower Section | With Side Body Cladding

  • Manufacturer Part Number: 672-57L, 672-57R.
  • LH QUARTER PANEL FRONT SECTION LOWER Compatible with Chevy AVALANCHE (WITH SIDE BODY CLADDING) 02-06 | RH QUARTER PANEL FRONT SECTION LOWER Compatible with Chevy AVALANCHE (WITH SIDE BODY CLADDING) 02-06.
Check Stock

Stehlen 733469493525 Advance Series Aluminum LED Bull Bar v2 - Matte Black/Brush Aluminum Skid Plate for 1999-2007 Silverado Sierra / 2002-2006 Avalanche / 2000-2006 Suburban Tahoe Yukon 1500

  • Application: For 1999-2006 Chevy Silverado 1500 Models, 2007 Chevy Silverado 1500 Classic Body Models, 2002-2006 Chevy Avalanche 1500 ( Models With & Without Cladding ), 2000-2006 Chevy Suburban 1500 Models, 2000-2006 Chevy Tahoe 1500 1/2 Ton Models, 1999-2006 GMC Sierra 1500 Models, 2007 GMC Sierra 1500 Classic Body Models, 2000-2006 GMC Yukon / Yukon XL 1500 Models ( Attention Note: Will Not Fit HD Heavyduty / Denali Models ).
  • Matte ( Satin Black ) With Stainless Skid Plate, Black Fine Shimmering Finish.
  • Advance Series LED Bull Bar. Angular, Bold & Edgy Design. Made of Light Weight Aluminum with Durable Construction. Built In LED Light Bar.
  • Built-In LED Light Bar: Straight Light Bar with 1 Row of LEDs. High Intensity LEDs Super Bright Offroad Style. Comes with Light Bar Switch Control.
  • Provide Front Bumper & Grille Protection / Brush Guarding For Off-Road Use.
Check Stock

SC Fiber Attenuator Male/Female Singlemode 20DB | SC/UPC Male to SC/UPC Female Fixed Single-Mode Attenuator | FiberCablesDirect | sc m/f sm attenuator 20Db

  • SC-SC UPC Male/Female fixed attenuator for singlemode applications to prevent over saturating an optical receiver when the optical power is too high. Using an attenuator ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • Core / Cladding: 9/125µm - Singlemode attenuator has a 9 micron diameter fiber core and a 125 micron diameter cladding.
  • Mode Type: Singlemode 9/125um Attenuator.
Check Stock

Legend 3 Ply Stainless Steel Cookware Set | 12 Piece Best Tri Ply Pots and Pans Set | Professional Quality Clad Pan & Pot Cook Sets All Kitchen Surface Induction & Oven Safe | PFOA PTFE & PFOS Free

  • STAINLESS STEEL PROFESSIONAL GRADE COOKWARE SET: Legend Cookware stainless steel pots and pans set combines the epitome in rapid heating, heat....
  • GENUINE MULTIPLY CLADDING TECHNOLOGY: Our signature MultiPly cladding technology produces the highest-performing 3 ply cookware set in your kitchen.....
  • DISHWASHER & OVEN SAFE: This 430 stainless steel cookware set gives you a real sense of strength as it offers long-term use to achieve healthy and....
  • THE PACKAGE INCLUDES: The 14-piece stainless steel pan set includes an 8-quart stockpot with lid.
  • LIFE-LONG WARRANTY: While Legend Cookware stainless steel cookware sets for home & kitchen are intended to last a lifetime, our promise lasts even....
Check Stock

DALSTRONG Pitmaster BBQ & Meat Knife - 6.5 inch - Shogun Series ELITE - Forked Tip & Bottle Opener - Japanese AUS-10V Super Steel - G10 Handle - w/Sheath

  • ... Pitmaster knife is the perfect barbecue sidekick, featuring a forked-tip for flipping meat directly on the grill and transferring foods from grill to plate. Built-in bottle opener..
  • Precision forged from a single piece of ultra premium Japanese high-carbon AUS-10V steel with 67-alternating layers of SUS410 Damascus cladding for stain-resistance and durability. Precise cryogenic tempering with liquid nitrogen increases the steel's crystalline structure, enhancing strength, flexibility and hardness..
  • Engineered to Perfection: The curved blade is engineered to create leverage and complete cuts in a single motion, without sawing. The knife is expertly crafted to slice through flesh, break through cartilage and trim fat from beef, pork, poultry, fish and other meats..
  • Dalstrong Power: Improving this blade further are the rock-hollow divots, which minimize adhesion, prevent stuck on food and reduce friction for a more seamless cutting experience. Featuring a beautiful, ergonomic and ambidextrous G10 Garolite handle with mosaic and engraving. The triple riveted design with full tang ensures superior strength and durability..
  • See why over seventy-five thousand professional chefs and home cooks love and trust the DALSTRONG DIFFERENCE. 100% SATISFACTION OR MONEY ....
Check Stock

Mophorn AI-9 Fiber Fusion Splicer with 5 Seconds Splicing Time Melting 15 Seconds Heating 7800mah Fusion Splicer Machine Optical Fiber Cleaver Kit for Optical Fiber & Cable Projects

  • 【3 IN 1 FIBER HOLDER】- SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable. Applicable Fibers:SM(G.652&G.657).
  • NZDS(G.655). Splice Loss: 0.025dB (SM), 0.01dB(MM) 0.04dB (DS/NZDS). Coating Diameter:100-1000μm, Cladding Diameter:80-150μm..
  • 【5” TFT DISPLAY】- It adopts 5-inch 800x480 high-resolution screen, and the operation graphics are simple and intuitive which ups to 300 times focus amplification. Once splicing times reach from 48000-60000 times, free to change a new machine.
  • 【BUILT-IN POWER METER & VFL】- Using the latest core alignment technology with auto-focus and six motors. It is more precise and less splicing loss than cladding alignment technology. Effectively measure connection loss,verify continuity and help assess fiber link transmission quality..
  • 【7800MAH LITHIUM BATTERY】- 7800 mAh high-capacity lithium battery, charging time ≤ 3.5 hours,continuous splicing and heating about 200 times..
  • 【USED BROADLY】- This Intelligent and convenient machine can be connected to mobile app, and supports ten languages: English, French, Russia, Italian, Portuguese, polish, Spanish, Thai, Arabic. It is especially suitable for optical fiber and cable projects, maintenance scientific research, railwa....
Check Stock

SPYMINNPOO 4 in 1 ESC 45A Electronic Speed Controller 2-6s ESC with Connecting Cables Fit for Unmanned RC Drone and for FPV Traversing Machine

  • Main Control Chip: EMF8BB21F16G main control chip, operating frequency up to 48MHz, 3 in 1 IC driver, imported high quality high frequency ceramic capacitor. High end PCB production process, pads are metalized edge cladding, so that you can avoid pads falling off when using. 3 ounces copper thick, six layers plate, greatly reduces heat, resulting in higher efficiency.
  • High Performance 45A ESC: Integrated with 4pcs high performance 45A ESC, double hole spacing design. With such a high degree of integration, the volume is only general size with the traversing machine, and the installation and wiring will become very simple. This incredible size and volume is specially designed for the racing class traverser.
  • Multiple Functions: Using BLHeli‑S firmware, powerful performance, support a variety of ways to set the ESC parameters, or upgrade the ESC firmware (such as through the throttle signal cable, using other development boards, or using cleanflight or Betaflight firmware to set or upgrade the ESC).
  • Anti Interference and Quick Response: Support not only ordinary PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra high speed throttle signal, but also the latest dshot 150, 300, 600 digital throttle for anti interference and quick response. Input an....
Check Stock

25 x Plastic Green 1mm Thick Window & Glazing Packers

  • Ideal for dry lining, cladding, flooring, glazing and frame fixing..
Check Stock