ReviewsClamp Bellows Flexible Coupling

NBK MWBS-28-10-14 Bellows Flexible Coupling, High Precision Welding, Bore Diameters 10 and 14 mm, Stainless Steel SUS304

  • The crest and root of the bellows are bonded by special high precision welding.
  • Thin metal plate molded with high precision allows higher misalignment to be accepted.
  • Even if there is misalignment, the constant revolution is performed.
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

Huco 321.07.1414.Z Size 07 Flex-Ni Bellows Coupling, Electroplated Nickel With Aluminum Hubs, Inch, 0.118\ Bore A, 0.118\ Bore B, 0.28\ OD, 0.55\ Length, 362.85 in-lbs Max Torque

  • Bellows coupling for use in instrumentation, medical equipment, sensitive high precision drives, and other high precision positioning applications requiring high torsional stiffness and torsional integrity.
  • Aluminum alloy hubs with clear anodized finish for corrosion resistance.
  • Nickel-electroplated bellows for corrosion resistance.
  • Single piece coupling for increased service life over couplings with moving parts.
  • Operating temperatures range from -58 to 248 degrees F (-50 to 120 degrees C).
Check Stock

Kegco Basic Kegerator Draft Beer Conversion Kit - BCK-NT

  • ... The shank comes fitted with a tail piece for connecting to 3/16″ I.D. beer line..
  • 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINE: This brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16″ I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out..
  • 5 FEET OF CLEAR BEER LINE WITH HEXNUT ASSEMBLY: This clear 5/16″ I.D. thermoplastic vinyl beer hose reliably meets all of the demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out. Included is 1 plastic snap clamp with a reusable design and a coupling assembly of 1 stepless clamp, 1 3/16″ hose nipple/tail piece, and hex nut coupling nut..
  • INCLUDES METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length..
Check Stock

UANOFCN 1998 and Up Exhaust Y-Pipe Kit Replaces 807166A1 Hose Bellows 32-14358T 32-44348T for Mercruiser

  • We ship from the USA, it is fast and guaranteed..
  • Replaces 807166A1 Water Shutters / Flappers 32-14358 , 32-14358T , 32-14358001 , 18-2746 Lower Exhaust Bellows , Tube , Hose，Clamp.
  • Also Replaces 32-44348 , 32-44348T , 32-44348001 , 18-2748 Upper Exhaust Bellows , Tube , Hose，Clamp.
  • Note: These will not work on V6 engines that came with the one piece manifolds ( use 807166A2 it has a flat tip ) , or early V8 with the round pin....
  • 100% Brand New With High Quality.Cooperated with local workshop, quality is guaranteed..
Check Stock

Superior Pump 99621 Lay-Flat Discharge Hose Kit, 1-1/2-Inch by 25-foot

  • 25-Foot discharge kit for use with most sump and utility pumps.
  • 1-1/2-Inch by 25-foot reinforced PVC lay-flat hose.
  • Hose kit also includes: (1) 1-1/4" FTP x 1-1/4" FTP or 1-1/2" MPT coupling, 1-1/4" MPT x 1-1/2" BARB adapter and one stainless steel hose clamp.
  • Includes all components: Hose, Hose Clamp, Coupling, Barb Adapter - for quick, easy installation.
Check Stock

REGNHLIF Zinc and Brass Male Clamp Coupling,Fits 3/4" or 5/8" Garden Hose Repair Fitting

  • End Male Hose Connector/Replacement/Mender For 5/8 inch or 3/4 inch hoses.
  • Brass Male Coupling, Zinc clamp and stainless steel screws.
  • Easy to use and reliable,Work perfectly with any standard garden hose.
  • Made with precision process, no leaking and durable, reusable and easy to install.
  • Package include:1 Pack Hose Connector Kit (1 Male coupling + 1 clamp + 2 screws).
Check Stock

uxcell 3mm to 1/8 inch Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 3mm to 1/8 inch, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold....
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock