ReviewsClamp Cylinder

Mallory 270 Distributor Cap (6Cyl, Mal)

  • Developed specifically for 6 cylinder Mallory distributors.
  • Delivers unrestricted spark energy flow, maximum energy transfer, and better performance.
  • Stress relieved immediately after molding to ensure dimensional stability.
Check Stock

Tru-Tech FD153T Distributor Cap

  • Developed specifically for 4 cylinder Mallory distributors.
  • Delivers unrestricted spark energy flow, maximum energy transfer, and better performance.
  • Stress relieved immediately after molding to ensure dimensional stability.
Check Stock

TDPRO Front 70/100-17 Wheel Tire and Rim With 15mm Bearing & Brake Disc Rotor & Hydraulic Disc Brake Caliper Master Cylinder & Rim Axle & Fork Shocker and Triple Clamp Handlebar Riser Set for Dirt Pit

  • The assembly comes with the 1.6x17 rim, 2.75-17 knobby tire, inner tube, wheel bearing.
  • 45mm top clamp and fork, 48mm bottom clamp and fork, fit 7/8'' 22mm handle bar.
  • Fork length: 735mm (from leg top to wheel axle centre), for 14" to 17" front wheels.
  • Suitable for 110cc 125cc 140cc Dirt Bike such as Thumpstar, Atomik, Pitpro, DHZ ect.
  • Package include: 1 x Tire + 1 x Rim + 1 x Inner tube + 1 x Brake Disc + 1 x Hydraulic Master Cylinder + 1 x Rim Axle + 2 x Fork Assembly +1 x Triple Clamp Handlebar Riser Set.
Check Stock

OBDMONSTER Ignition Timing Light, 12V Strobe Lamp Inductive Petrol Engine Timing Gun Automotive Tool for Car Motorcycle Marine

  • Ignition Timing Light: Design to re-timing your car's ignition to get the best performance that you can. Suitable for car, vehicle motorcycle, marine,all two-stroke and four-stroke gasoline engines, easily operate on 12V ignition systems.
  • Handle Pistol-type design:Ergonomically designed with comfortable press keys, great Press feeling and easy operation. And the high quality makes it be worn hardly..
  • Sensor Clips: The sensor clip is red and black to distinguish positive and negative poles, easy to use and more secure. It's sliding clamp-on inductive pick-up, for easy and safe hookup..
  • Advance Function: Capable of testing the ignition timing scale on the engine flywheel or belt pulley intuitively to adjust appropriately.Able to detect the automotive knock suppression control system and vacuum advance angle control system, change its advance angle with the speed change..
  • Attention: The power supply is 12V with red connecting to positive and black to negative. The high voltage wire induction clamp is clamped on the high voltage line of cylinder with the arrow on the induction clamp pointing to the direction of the spark plug for normal working..
Check Stock

Powermatic 719T Tilt Table Hollow Chisel Mortiser, 1HP, 115/230V (1791264K)

  • STURDY CAST IRON CONSTRUCTION: Precision-machined column and table..
  • GAS CYLINDER CONTROLLED RACK AND PINION SYSTEM: Smooth head raising and lowering..
  • TABLE AND FENCE TILTS: From 0 to 35° for angled mortises..
  • SWIVELING VISE CLAMP: Accommodates angled work pieces..
  • QUICK-ADJUST DEPTH STOP: For uniform mortise depths..
Check Stock

Orion Motor Tech Valve Spring Compressor | 10 Piece Spring Clamp Tool Kit with C Clamp, Collet Pusher Adapters, Extension Rods, and Lever for Car, Motorcycle, ATV, and Small Engine Repairs

  • 10-PIECE VALVE SPRING SET: This clamp set by Orion Motor Tech includes a wide C clamp, 3 extension rods (3" 4.4" & 4.4"), 5 collet adapters (16 19 23 25 & 30mm), and a 4-inch hand lever.
  • SAFE & SIMPLE OPERATION: Instructions guide simple use, selecting the best sizes for compressing the valve springs or dealing with cylinder heads safely during removal and installation from almost any automotive, motorcycle, or other small engine.
  • SOLID DURABLE CONSTRUCTION: Our C clamp and other parts are forged from carbon steel, heat treated and coated with black oxide to provide superior strength and corrosion resistance and withstand the stress of your compressed springs.
  • EASY STORAGE & TRANSPORT: The reinforced blow-molded case keeps everything organized, easy to carry, and just as convenient to stow away between jobs.
  • SATISFACTION GUARANTEED: Order knowing that Orion Motor Tech's usual strong warranty and friendly 24/7 customer service ensures these automotive tools and equipment will give you years of helpful service!.
Check Stock

12V Air Compressor Heavy Duty Tire Inflator Portable for Truck SUV RV Tires,70L/Min Double Cylinders Metal Car Air Pump 150PSI Sliver

  • 【FAST INFLATION】Air compressor is Heavy Duty Double cylinder design that inflating faster than single cylinder.Maximum pressure 150PSI, air flow....
  • 【STABILITY】Tire inflator use more stable motor effectively reduce the vibration and noise.And rubber feet to make sure the 12V air pump stays....
  • 【MULTI-PURPOSE】The portable air pump match 4 different nozzles and With battery clamp.That air compressor suitable for car, truck,bike, motor,....
  • 【RICH EQUIPMENT】Bag with reflective strip in addition to convenient storage, it can also serve as a warning in emergency.And the tire repair kit....
  • 【SERVICE】Please contact us ASAP if there are any problems.If the product has quality problems,we will provide a full refund or replacement for....
Check Stock

Fixing Sinking Office Chair Office Chair Cylinder Replacement to Prevent Sinking Adjustable Height Office Chair Gas Lift Cylinder Saver fix kit with A Wrench

  • Apply For - Fixing Sinking Office Chair is suitable for most office chairs that the diameter of chair gas lift cylinder is within 25-28mm ( 0.98-1.1....
  • Office Chair Fix Kit - Metal chair sinking clamp comes with a free hexagon wrench to tighten the screws for quick installation. Practical fix sinking....
  • High Quality- Office chair sinking stop is made of 304 Stainless Steel material, has strong load bearing capacity, not easy to break or crack....
  • Practical Function- Office chair cylinder replacement kit can fix a sinking office chair so that you can concentrate on working or learning. Moreover,....
  • Easy To Install- Install the Office chair saver just in several minutes. The chair will not sink even if you pull the gas handle. Attention: please....
Check Stock

Timing Light 12V Ignition Timing Light Automotive Strong Flash Timing Lights with Sliding Sensor Clip,Long Test Lead, Reverse Polarity Protection, Overload Protection for Car, Motorcycle Petrol Engine

  • ...able for automobiles, motorcycles, ATVs, RVs, boats and all two-stroke or four-stroke gasoline engines.It works on 12V ignition systems. Its speed is up to 1000rpm..
  • 【Why You Need Timing Lights】Under the long-term normal wear and tear of the engine, the timing belt and pulley are regularly replaced, and the cylinder pressure drops, so the ignition timing needs to be readjusted to improve engine performance and efficiency. Timing light automotive can be used to record timing changes due to ignition system failure or resetting timing when vehicle components are changed..
  • 【Strong Flash Timing Light with Sliding Sensor Clip&Long Test Lead】The special bulb used in timing light produces a very strong flash so that the timing marks on the engine can be viewed in bright light or even in sunlight, which is very convenient for you to adjust the ignition timing. The spark plug sensor clip is a sliding clip design for easy and safe hookup of the high voltage line of the No.1 cylinder. The test lead is 4.54FT long, which allows you to test the whole ignition system easily..
  • 【Durable Timing Light with Ergonomic Handle&Strong Bite Clips】The handle of the timing light is ergonomically designed, its handle shape and button are comfortable for easy opera....
Check Stock

Baileigh 40-Inch Sheet Metal Finger Brake (BB-4012F)

  • 40" BOX BRAKE: Bends up to 12-gauge mild steel (16-gauge stainless steel)..
  • FULLY-WELDED HEAVY STEEL FRAMEWORK: Minimizes flex and deformation..
  • HARDENED BENDING DIE: Ensures years of high-quality results..
  • SPRING-LOADED CYLINDER: Assists in lifting the apron, especially helpful when you’re bending at full capacity..
  • FOOT-CONTROLLED CLAMP: Leaves your hands free to position the sheet metal before clamping in place..
  • CREATE DIFFERENT SIZES: Includes 11 hardened fingers of varying widths that you can easily rearrange..
Check Stock

Tevlaphee Wheel Lock Clamp Anti Theft Trailer Wheel Lock Adjustable Tire Boot Lock Tire Claw Heavy Duty for Parking Car Truck RV SUV

  • ✪HIGH SECURITY PERFORMANCE: Tevlaphee anti-theft wheel lock clamp is made of heavy-duty iron, thus it is anti-prying and anti-cutting. The anti-rust coating makes the wheel lock rust-free and more durable. The copper lock cylinder enhances the security of the lock. The yellow appearance gives the lock a more visually deterrent effect, keeping thieves away and providing further protection for your car when it is parked..
  • ✪IMPROVED USER-FRIENDLY DESIGN: Through market research, testing and trial of the wheel lock clamp, we found that the steel spikes can affect customers’ operating experience. They are worried that spikes will the wheel during the installation process. Therefore, we remove the spikes for your convenience..
  • ✪SAFE AND COMFORTABLE USE: The foam wrapped handles offer more comfortable use. The rubber ring around the suction cup and the protective rubber stuck inside the clamp protect the tires from scratches..
  • ✪UNIVERSAL FIT: The claw mouth can be adjusted to 3.6’’-15.3’’. This locking device can perfectly fit a wide range of vehicles like trailers, cars, SUVs, ATVs, caravans, etc..
  • ✪SUPERIOR CUSTOMER SERVICE: Each lock set includes 1 wheel lock, 1 crank and 2 keys. If you are not satisfied with your purchase or if you have ....
Check Stock