ReviewsClamp On Current Transformer

Suraielec 120W Low Voltage Transformer with Photocell Sensor and Timer, 120V AC to 12V/15V AC, Landscape Lighting Transformer with 2 Independant Zones,Weatherproof for Pathway Lights, Step Light

  • 【Photocell Sensor & Countdown Timer】Landscape transformer with dusk to dawn sensor automatically turns low voltage pathway lights on at sunset, and off when sunrise. With countdown timer setting, you can illuminate spotlights and deck lighting auto on at dusk , then off at 4, 6, 10 hours interval as needed. Convenient and energy efficient for daily use..
  • 【2 Zones for Independent Control】Suraielec outdoor light transformer is equipped with two independently controlled outputs, allowing to setup 2 different landscape systems all controlled with a single transformer. That’s, you can set your front yard lighting stay lit till dawn while the backyard lights is set to be off 6 hours after sunset. Control home lighting separately..
  • 【Easy to Program & Memory Function】Easy to operate with a push of button, the outdoor low voltage transformer is designed with 3 lighting modes: manual on/off- auto on/off- on at sunset and off 4/6/10 hours later, choose any preferred mode by Zone button. Features memory function, transformer retains its last mode setting after power outage..
  • 【Multi-Tap Outputs & Overload Protection】120W landscaping transformer converts 120 volt current to a low voltage current ( Selectable 12V AC /15V AC), achieving a safe an....
Check Stock

24Volt Doorbell Transformer, C - Wire Adapter Thermostat, Compatible with Nest,Honeywell,and Ecobee Smart Wifi Thermostat, Nest Hello Ring Video Doorbell

  • HOME USE: Plug the transformer into your standard 110V /120V outlets and converts to 24 volt AC current..
  • SUPPORTED DEVICES: The 24v power adapter can not only power for popular smart thermostats such as Nest, Honeywell, Ecobee, Hive, Emerson Sensi, but also can convert to 24 volt AC current for other devices that require 24v current for operation..
  • TECHNICAL SPECIFICATIONS: Our battery backup input voltage is 120 V AC, 60 Hz.
  • EASY INSTALLATION :To prevent no power output, you must ensure that the terminals are stripped and securely clamp the screw terminals into the thermostat to maintain good contact，2 pin non-polarity wires to ensure easy and error free installation for installers of all skill levels and knowledge bases，If your wiring is complicated, please ask a professional electrician for help..
  • EXTRA LONG CABLE: 7M (23ft) long cable enables you to install the cable along the wall and connect to the electrical outlet inside or outside..
Check Stock

ZenStyle Arc Welding Machine DC Inverter 160AMP 120V/230V Dual Voltage IGBT Stick Arc Welder

  • ...e plugged into a 110V wall socket with household current instead of high voltage.
  • Its over-voltage protection, under voltage protection, over current protection, over load protection designs ensure you are safe when you use it.
  • 〖Ideal Choice〗The inverter welder switches AC power to DC then incorporate a stepdown transformer to produce the proper voltage and current, ideal for high frequency MMA welding.
  • It is a ideal welder for both of professional use and personal use because of its features and strong ability.
Check Stock

ACEIRMC 8pcs HX711 Weighing Sensor Dual-Channel 24 Bit Precision A/D Module Pressure Sensor for Arduino Raspberry Pi Microcontroller

  • Analog Current Meter Module. Transformer can only sense AC.
  • This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals..
  • 3-wire electronic block interface, input 5V - GND. S pin is the output analog voltage value..
  • You can use jumpers to select the parallel output of the output to adjust the range of analog values that are output..
  • On-board 3P and 4P connecting interface for current signal output can be easily connected with your MCU development board.
Check Stock

VOLT 300W LED Low Voltage Transformer (12V/15V)

  • LOW PROFILE MAGNETIC TRANSFORMER – To make this transformer slimmer, lighter and simpler to install, we eliminated unnecessary voltage taps. Just use the 12V and 15V taps. That's all you need for any medium-sized (up to 300W) LED landscape lighting system. No need to worry about voltage loss..
  • MODULAR TIMER WITH PHOTOCELL INCLUDED - Visible through the housing window, this timer can be set for simple dusk-to-dawn operation or set to turn off after a certain number of hours. The photocell is built into the timer..
  • EASY TO INSTALL - The clamp-type terminal blocks are impressively easy to use - taking seconds to connect - compared to many minutes of frustrating work for standard terminal blocks. Just insert the stripped wire and close the clamp! Accepts up to 10-gauge wire..
  • HIGH PERFORMANCE – This transformer's toroidal core allows for more reliable, efficient, cooler and quieter operation than comparable EI laminated types. It's also superior to electronic transformers, which may not be compatible with LED circuits, suffer from extensive voltage loss, and are subject to overheating and premature failure..
  • LIFETIME WARRANTY – With an industry-leading warranty, this Slim Line Transformer is designed for a lifetime of worry-free use - we guarantee it. ....
Check Stock

Autel MaxiSys MSOAK Oscilloscope Accessory: Work with MaxiFlash VCMI MSUltra MS919 & MP408, 65A&650A AC/DC Current Clamp, Coil On Plug Probe Included with Carrying Case Accessory Kit

  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】Autel MaxiSys MSOAK, compatible with the MaxiFlash VCMI included with the MSUltra and MS919, and the MP408 4-channel oscilloscope (sold separately), includes the 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil On Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs), within a blow-molded carrying case. To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash.
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】 Includes 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil on Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs).
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】The current clamp measures a maximum current of 65A with a frequency up to 20 KHz. It works with jaws that open to allow clamping around an electrical conductor. And the 650A AC/DC current clamp measures a maximum current of 650A with a frequency up to 400 KHz..
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】COP Probe can catch the ignition waveform of automobile engine easily. The ignition waveform is a window, through which we can see what happened in the engine combustion chambers. It determines whether the ignition plug needs to be replaced or clea....
Check Stock

Beleeb 20Amp Variable Transformer Auto AC Voltage Regulator Power Supply, 2000VA Max, 0~130 Volt Output

  • a variable AC input to a transformer input DC bridge rectifier to produce a variable output.
  • The adjustable voltage transformers does not convert AC to DC. It requires an AC input and the output is also AC. Also, the unit will not affect the cycle rate from the power company. If your power system is providing 60Hz, the Variac auto transformer will not change that, the ouput will be an undistorted 60Hz. This unit is rated up to 20 Amps or 2KVA Peak (16A Continous)..
  • Power: 2000VA,Input voltage: 110V, Input current: 18A, Output voltage: 0-130V, Rated output current: 15.38A (Continuous operation for 2 hours, 003c10A can work continuously.
  • This variable transformer is the perfect speed controller. The speed is infinitely variable, and because a transformer doesn't chop up the AC waveform like electronic speed controllers do, there's no noise, humming, etc..
  • If you're planning on using this as an "industrial" or bench-top supply with heavy loads, I'd recommend examining the brushes and adjusting the spring pressure on the windings. This can improve performance by reducing brush-contact sparking. Otherwise, this device is ready to work right out of the box..
Check Stock

Doorbell Transformer Compatible with Ring Video Doorbell Pro 16v 30va Hardwired Door Chime Transformer

  • 【Doorbell Transformer】: Apply to multiple doorbell transformers, compatible with Ring Video Doorbell Pro, Nest Hello Video Doorbell, etc..
  • Note: The above brands are only used to demonstrate compatibility.
  • 【Ring Doorbell Transformer】: Input 120V AC，60Hz, Output 16V AC，30VA for residential, commercialand industrial low voltage power supply. Power single or multiple doorbells, compatible with Ring Video Doorbell Pro, Nest Hello Video Doorbell, ZmodoWiFi Doorbell, SkyBell,etc.
  • 【Ring Transformer】: Eco-friendlyzinc plating technology , no pollution. Convenience of Installation: Free quick connector included. Turn OFF Power before installation. Open up the connector to 90°angle, insert 120V power cord and transformer’s input cord at both ends, clamp the transformer, screw down the output part to doorbell cord..
Check Stock

24Volt Power Adapter/Transformer,C-Wire Adapter Thermostat，Compatible with Honeywell,Ecobee,Nest and Sensi Smart WiFi Thermostat Pro(25Foot /7.6M Cable)

  • HOME USE: Plug the transformer into your standard 120V outlets and converts to 24volt AC current..
  • SUPPORTED DEVICES: The 24v power adapter can not only power for popular smart thermostats such as Nest, Honeywell, Ecobee, Hive, Emerson Sensi, but also can convert to 24 volt AC current for other devices that require 24v current for operation..
  • TECHNICAL SPECIFICATIONS: input voltage is 120 V AC, 60 Hz.
  • INSTALLATION :To prevent no power output, you must ensure that the terminals are stripped and securely clamp the screw terminals into the thermostat to maintain good contact，2pin non-polarity wires to ensure easy and error free installation for installers of all skill levels and knowledge bases,If your wiring is complicated, please ask a professional electrician for help..
  • EXTRA LONG CABLE: 7.6M (25ft) long cable enables you to install the cable along the wall and connect to the electrical outlet inside or outside.For Nest E connected this adapter to C and R pins (R also having the HVAC’s Red line connected),For Nest Learning Thermostat,3rd generation connected adapter to the Cand RC pins.
Check Stock

Doorbell Transformer Compatible with Ring Video Doorbell Pro 16v 30va Hardwired Door Chime Transformer 1 Pack

  • 16V 30 VA doorbell transformer: 16-volt, 30 VA low voltage hardwired door chime transformer.
  • Handy use: power single or multiple door chimes in one home with ease, replace the old and under powered doorbell transformer for better performance.
  • Easy installation: screw down or threaded clamp to electrical box, safe handling.
  • Wide application: universal using for many doorbell transformer, compatible with Ring Video Doorbell Pro, Nest Hello Video Doorbell, etc..
  • Note: the brand above is only for demonstrating compatibility.
Check Stock

Doorbell Transformer, 16v 30va Compatible with Ring Video Doorbell Pro, Nest Hello Doorbell Hardwired Door Chime Transformer

  • 16 V 30 VA doorbell transformer: 16-volt, 30 VA low voltage hardwired door chime transformer.
  • Handy use: power single or multiple door chimes in one home with ease, replace the old and under powered doorbell transformer for better performance.
  • Easy installation: screw down or threaded clamp to electrical box, safe handling.
  • Wide application: universal using for many doorbell transformer, compatible with Ring Video Doorbell Pro, Nest Hello Video Doorbell, etc..
  • Note: the brand above is only for demonstrating compatibility.
Check Stock