ReviewsClamp On Rod Holders For Boat

Ducurt Horizontal Fishing Rod Rack Holders Wall-mounted Fish Pole Holder for Garage & Boat 6-Rod Storage Racks -1 Pair Rod Holder Rod Holder

  • Horizontal 6-rod Racks: The fishing rod holders is 13.6 inch long and 2.5 inch wide, it can hold up to 6 fishing rods. The diameter of the EVA foam is about 0.4 inch, it can fit most of rod sizes, especially ideal for fresh water rods and ice fishing poles..
  • Space Saver: You can easily screw the fishing rod racks to your wall, ceiling, garage or your boat for space saving. Works good for you to keep your fishing rods off the floor and well organized..
  • Wall Mounted Fishing Rod Rack: Each pair fishing pole holders come with 4 quality screws for installation. Just drill one hole in the wall, then level the fishing pole rack in place and screw into the hole and put on the rod racks. The steps will take you about 10 minutes, convenient for both kids and adults..
  • Protective and Secure: Equipped with soft EVA foam assorted in the fishing pole holders, helps protect your valued fishing rods from scratching and keep them from falling down. The foam is elastic, more convenient for you to put on and take down your fishing poles..
  • Two Types Available: There are horizontal fishing rod holder an....
Check Stock

Pelican - Bass Raider 10E Angler Fishing Boat - 10.2 ft

  • Durable: Our patented RAM-X material is known for its high-impact resistance and will make your fishing boat last through time..
  • Comfortable: Navigate in comfort with two folding seats that can slide along the tracks so you can adjust your position on the boat. This comfortable seat also swivels 360 degrees so you can face any direction while you're fishing or reaching for equipment. Additional features include multiple storage compartments, drink holders and two vertical rod holders for your convenience..
  • Pre-Wired: The BASS RAIDER 10E fishing boat is pre-wired to easily connect an electric motor and/or a sonar with a 12 V electrical outlet..
  • High Capacity: This fishing boat holds a maximum weight capacity of 600 lb, ensuring plenty of room to bring someone along on your fishing trip and space for all your gear..
  • Safe: This boat is designed to provide excellent stability and balance when you're casting lines and reeling in fish. Our unique manufacturing process allows us to include additional flotation inside the hull of all of our fishing boats in order to meet or surpass ABYC standards..
  • Easy Transportation: Equipped with four robust carrying handles, it provides a good grip so that two people can easily transport this fishing boat..
Check Stock

Clark Fork River Montana Dry Creek to St. Regis: June

  • ...table: Navigate in comfort with two folding seats that can slide along the tracks so you can adjust your position on the boat. This comfortable seat also swivels 360 degrees so you can face any direction while you're fishing or reaching for equipment. Additional features include multiple storage compartments, drink holders and two vertical rod holders for your convenience..
  • Pre-Wired: The BASS RAIDER 10E fishing boat is pre-wired to easily connect an electric motor and/or a sonar with a 12 V electrical outlet..
  • High Capacity: This fishing boat holds a maximum weight capacity of 600 lb, ensuring plenty of room to bring someone along on your fishing trip and space for all your gear..
  • Safe: This boat is designed to provide excellent stability and balance when you're casting lines and reeling in fish. Our unique manufacturing process allows us to include additional flotation inside the hull of all of our fishing boats in order to meet or surpass ABYC standards..
Check Stock

NTYGAE Boat Fender Clips Adjustable Stainless Steel Bumpers Hangers Pontoon Boat Bumpers Square Rail Clips for Docking 2 Pack

  • 【Material】The pontoon fender clips are made of high-strength stainless steel, which can bear a weight of more than 35kg. The square rail clip uses....
  • 【Upgrade Hanger】The boat fender holders are suitable for 1/4 to 3/8 inch fender line, can clamp 1-1.37 inch square rail, is the best pontoon boat....
  • 【New Design】Designed by the United States, the height of the pontoon can be adjusted at will without causing the fender line to fall off, which is....
  • 【EASY TO USE】The boat fender holders are sliding adjustable in size and can be mounted on square rails with seats without worrying about being....
Check Stock

KEMIMOTO Boat Cup Holder Boat Storage Organizer Marine Seat Organizer for Fishing Boat Boat Seat Storage Caddy Fits 1.5 -2 Round Rod

  • Convenience: kemimoto boat cup holder provides a convenient place to keep beverages on the water. You don't have to worry about holding your drink or placing it where it might spill..
  • Efficiency: These boat caddy organizers help you stay organized and efficient while fishing. By providing designated places for items such as bait, hooks, and lures, you can quickly and easily find what you need without wasting time searching through cluttered tackle boxes..
  • Fits: This boat organizer custom clamp is specifically for 1.5"-2" round rod..
  • Durability: This boat seat tool holder is durable and can withstand exposure to the elements, such as water, sun, and dirt..
  • Package Include & Why Choose Us: The package includes 1 boat seat cup holder, 1 wrench, 1 connecting rod, 2* M6 screws, and a gasket. At kemimoto, we fully stand behind our boat seat tool holder. If you don't 100% love our boat cabin storage holder, please don't hesitate to contact us, and we will provide you with the best solution in time..
Check Stock

perception Pescador Pilot 12 | Sit on Top Fishing Kayak with Pedal Drive | Adjustable Lawn Chair Seat and Tackle Storage Areas | 12' | Sonic Camo

  • Pedal-driven performance at an unbelievable price - Made in USA.
  • Lawn chair style mesh seat with 2-level seat adjustment and breathable mesh for ultimate all-day comfort and no pain.
  • Pilot drive pedal system can be fully recessed into hull for zero draft.
  • Leak-proof one-piece construction with built-in buoyancy for added safety.
  • Large front and rear open storage for cooler, tackle, and other gear.
  • Gear tracks, fish finder consoles & 4 Rod holders for anglers.
  • Integrated accessory rails on each gunwale for fish finders, Rod holders and other accessories.
  • Perfect for lakes and ponds, slow moving rivers and streams and calm coastal waters.
  • Boat length: 12’5” – width: 33. 75”.
  • Boat weight: 85 lbs. – Max capacity 475 lbs..
Check Stock

Inflatable Boat Set 2-3 Person Thickened Fishing Boat Hard Inner Bottom Floor Boat with 3 Separate Air Chambers

  • ...e person. As a fishing boat, it is suitable for one person. MAX LOAD:700 lbs(The hull maxload:518 LBS + The inflatable bottom plate maxload:187 LBS)，Outside dimension：90‘’*50‘’，Inside dimension:63‘’*23‘’,Total weight:about 41 pound,Fishing have never been easier with the 2 built-in fishing rod holders.
  • SAFETY:Three separate air chambers, two on the hull and one on the bottom,if one of them is damaged,the other air chamber will not be affected,even if only one chamber is intact,it can still reach the shore safely..
  • MATERIAL：0.7mm thickened PVC clamping net material hull, strong and durable, not easy to deformation，The bottom plate added nylon wire，After inflating it, its hardness is close to that of the board，It is more stable when standing inside the boat, and the bottom plate also serves as a separate air chamber to provide additional buoyancy，If the inflatable boat breaks and leaks air,It can still stay afloat，One more layer of security for life..
  • In order to facilitate packaging folding, the air plug is in deflated state when leaving the factory, as the boat before inflatable must press ....
Check Stock

CLIO 4 Pcs Fishing Rod Holder Racks Portable Fishing Rod Stand-Off Tube Rod Pole Holder Bracket Support Black

  • 【High Quality】: Fishing Pole Racks made of Environmentally friendly ABS construction, durable and lightweight for freshwater and saltwater.
  • 【For Most Fishing Rods】: This fishing rod rack is About 10.6 x 2.0 in (27 x 5cm), single slotted holder designed to lock-in most fishing rods.
  • 【Screw and Nuts】: 4 x Rod Holders with 8 x Nuts & 16 x Screws for easy mounting on the deck of your boat ship or Yacht.
  • 【Useful Fishing Holder】: This Fishing rod holders ends the tedious task of holding the rod for long time.
  • 【Installation Nuts】: Come with the screw and nuts, the nut is the lock-nut, inside is the nylon ring damping in it, which can prevent the screw....
Check Stock

TeBaisea Plastic Fishing Rod Holders Fishing Rod Racks Socket Wall-Mounted for Boat Marine Fishing Box Kayak Boat Yacht Heavy-Duty Fishing Holder Tool Rack Assembly Rack 3 Tubes

  • 10.6" Rod holders with fishing reel slots,Slotted design, convenient to use with spinning wheel or fishing reel,Also holds fishing lures, a filet....
  • Suitable for clamp-on or embedded areas where installation is inconvenient,holds 1-3fishing poles upright for storage against a boat or garage wall.
  • Stainless steel mounting screws included,base on needs drilling for pilot holes, or a power screwdriver for installation.
  • High-strength nylon material, can be used in both fresh water and sea water, contains sun-proof and anti-aging ingredients, has a long service life,....
Check Stock

Original Leaning Post with Folding Foot Rest and Three Rod Holders - Universal Design for Center Console Fishing Boats - White with White Upholstery

  • ULTIMATE HELM SEATING REPLACEMENT - Experienced anglers know that a leaning post is the best helm seating option on a fishing boat. The Fishmaster Original leaning post allows you to sit or stand at the helm and make quick moves to your rods when you see a bite. It also supports a number of accessories that are helpful for fishing..
  • BUILT-IN ROD HOLDERS - Three integrated rod holders are welded along the back of the leaning post to keep your gear handy and ready for use. Each includes a plastic liner that prevents marring of your rod and reel..
  • FLIP-DOWN FOOTREST - For added comfort as you cruise down the waterway, the Original leaning post features a foot rest that can be flipped down for use and flipped up to provide additional space on the boat’s deck..
  • EASY ASSEMBLY AND INSTALLATION - To get you out on the water as quickly as possible, we’ve made the Original Leaning Post easy to install. We provide highly detailed, illustrated instruction manuals and assembly videos to show you just how simple the process can be..
  • LOVE IT OR RETURN IT! - We want you to have the best fishing experience possible. That is why we cover our leaning posts with an industry-leading 5-year warranty..
Check Stock

Tig Vision Inc Folding Footrest for Boat 28 Length

  • ULTIMATE HELM SEATING REPLACEMENT - Experienced anglers know that a leaning post is the best helm seating option on a fishing boat. The Fishmaster....
  • BUILT-IN ROD HOLDERS - Three integrated rod holders are welded along the back of the leaning post to keep your gear handy and ready for use. Each....
  • FLIP-DOWN FOOTREST - For added comfort as you cruise down the waterway, the Original leaning post features a foot rest that can be flipped down for....
  • EASY ASSEMBLY AND INSTALLATION - To get you out on the water as quickly as possible, we’ve made the Original Leaning Post easy to install. We....
  • LOVE IT OR RETURN IT! - We want you to have the best fishing experience possible. That is why we cover our leaning posts with an industry-leading....
Check Stock