ReviewsClamp on Exhaust Tips

Roadformer 2.5 Butt Joint Exhaust Band Clamp - Aluminized Steel for 2.5 OD Exhaust Pipe Muffler Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 2.5" butt joint exhaust clamp is made in high quality standard, this band clamp is used for 2.5" OD to 2.5" OD exhaust....
  • REAL SEALING CAPABILITY - Roadformer 2.5" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached....
  • DURALITY & RELIABILITY - exhaust clamp band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior....
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and....
Check Stock

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Roadformer 3' Butt Joint Exhaust Band Clamp - Aluminized Steel for 3' OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 3" butt joint exhaust clamp is made in high quality standard. This band clamp is used for 3" OD exhaust ends connection.
  • REAL SEALING CAPABILITY – Roadformer 3" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
  • Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
  • Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
  • EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Black Exhaust tip - Fit 1.75 to 2.5 Inch Exhaust Tail Pipe Diameter- Black Coated Stainless Steel - Car Muffler Tips

  • Please measure your own pipe and bumper cutout, and compare to this product fitment size..
  • This exhaust tips fit pipes measuring between 1.75 and 2.5 inches in diameter..
  • Size : / Length 6'' / width 3'' / Inlet Diameter 2 3/4'' / Outlet Diameter 3''.
  • This muffler tips are made by high quality stainless steel with black coating..
  • Clamp-on and bolt-on installation : They are attached to the tailpipe by clamps or screws..
Check Stock

LTI 2.75 inch Butt Joint Exhaust Band Clamp 304 Stainless Steel for 2.75 OD to 2.75 OD Exhaust Pipe Connection 2.75 Inch

  • LTI 3" Length exhaust clamp is Made in Full 304 Stainless Steel Over 100 hours salt spray test to ensure the great performance in anti-corrosion.
  • Universal fitment Butt Joins 2.75" OD Pipe to 2.75" OD Pipe, we also provide many different sizes to fulfill your needs. Full clamping area to create....
  • The butt joint clamps are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back....
  • No welding design makes lap joint clamp fast, easy and accurate installation. it is removable and reusable, easy to install without welding.
  • LTI provide 12 months warranty from the date of purchased. We value your shopping experience and strive to offer a high-quality product and service.....
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Black Exhaust tip - Fit 2.5 to 3 Inch Exhaust Tail Pipe Diameter- Black Coated Stainless Steel - Car Muffler Tips

  • Please measure your own pipe and bumper cutout, and compare to this product fitment size..
  • This exhaust tips fit pipes measuring between 2.5 and 3 inches in diameter..
  • Size : / Length 7 '' / width 4.5'' / Inlet Diameter 3 3/8 '' / Outlet Diameter 4.5''.
  • This muffler tips are made by high quality stainless steel with black coating..
  • Clamp-on installation : They are attached to the tailpipe by clamps and screws (Included)..
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock