ReviewsClamp on Flow Meter

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

Extech MA445 True RMS 400A AC/DC Clamp Meter with NCV

  • ▲Fast and Accurate AC / DC Ampere Clamp Meter : utomatic clamp multimeter, can measure AC / DC current, AC / DC voltage, resistance, capacitance, on-off, temperature, diode and frequency (Hz).
  • A perfect troubleshooting tool that will help you solve electrical problems in the car or at home quickly and safely.
  • ▲Contactless Voltage Detection : When AC voltage is detected, a visible LED lights up and emits a beep.
  • The multimeter's flashlight will only glow when the current is being tested.
  • ▲Overload Protection : Overload protection and double insulation protection prevent electric shocks and protect users from hazardous areas.
  • ▲Versatile and Easy to Read : a large, high-resolution LCD with large backlighting ensures better visibility in dark work areas.
  • ▲The "Return to Zero" Function : reduces data errors affected by the earth's magnetic field and helps you get more accurate measurements.
  • ▲Automatic Sleep Mode : After 30 minutes of inactivity, it automatically switches to sleep mode to save energy.
  • ▲Low Power Indicator : When the clamp meter is in a low battery state, the LCD display of the clamp meter will display a low battery symbol to remind you to replace the battery.
  • ▲Fixed with Free Additional Test Lead : free battery and test lead, ever....
Check Stock

Power Supply AC Adapter OEM Replacement for Xbox One S Slim Model NP15-120P1A PA-1131-13MX

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Voltage Tester, Auto Sleep Digital Clamp Meter Backlight Accurate Handheld Contactless for Current for Resistance(Red)

  • Multi Function: Clamp meter supports AC, DC span, resistance, AC frequency, AC voltage measurement, continuous measurement, with backlight..
  • Measuring Range: Clamp multimeter with open clamps, can measure AC current in conductors up to 26mm without interrupting the circuit..
  • LCD Digital Display: High accuracy digital clamp meter to measure accurately. With data hold, maximum readings, and large easy to read LCD screen..
  • Automatic Sleep: The digital clamp meter has a built in sleep mode. Automatically enters sleep mode after 15 minutes of inactivity to save energy..
  • Easy To Carry: Handheld clamp voltage tester, compact size and lightweight, easy to carry, ideal for travel. Help you easily solve electricity problems..
Check Stock

BTMETER AC/DC 1000A Clamp Multimeter, 4000 Counts Digital Clamp-on Meter with Data Logging Measure Amp Volt Ohm Capacitance Frequency Temperature Continuity, Electrical Tester 570T-APP

  • ⚡【DC AC Current Clamp Multimeter】This multifuctional clamp-on meter can accurately measures AC DC current with 400A/1000A ranges, 100mA/1A resolution；AC and DC Voltage to 1000V, Resistance to 60M ohms.
  • Temperarture -4~1832℉ (℃/℉ Optional), Test voltage 4V, can measure light-emitting diodes, and continuity test..
  • ⚡【Sensitive Hall Effect Clamp Sensor】Engineered with hall effect sensor to ensure high precision measurement on DC/AC amperage testing. Built with big jaw caliber size 1.77 inches (45mm), allows you non-contact measuring multiple wires at the same time. ❗Please separate the hot and neutral conductors or they will cancel each other out and give zero amp reading, just clamp on the LIVE line for accurate amperage testing❗.
  • ⚡【Electrical Data Logger】Get rid of hand-written notes or complicated maths. With this intelligent clamp amp meter, all electric measurements will be displayed on your phone or tablet, auto graph a trend chart, support to sharing out in Excel, TXT format. This clamp-on ammeter is reliable on remotely troubleshoot electrical problems in HVAC, household, commercial,....
Check Stock

Inrush Current Clamp Multimeter, BTMETER BT-570N TRMS 5999 Display Clamp-on Amp Meter for AC/DC Voltage Amperage Ohm Temperature Test

  • ✅TRUE RMS CLAMP ON MULTIMETER - 6000 Counts accurately measures AC DC current to 1000A , voltage , resistance, capacitance, frequency, duty cycle. Even more testing on Temperature (℃/℉), Inrush Current, Continuity test with buzzer, Diode test..
  • ✅BOTH AC/DC CLAMP-ON AMMETER - High resulotion, True RMS allows you get accurate measurement regardless of waveforms. Relative mode for Capacitance, DC Inrush, Zero out for lower amps measurement, data hold, max/min, auto power off, polarity and low battery indicator..
  • ✅SAFE AND EASY TO USE - Overload protection on all ranges. Use this clamp amp meter for unidentified wire testing, Contactless amperemeter test for amperage, Avoid electric shock without touching any wires..
  • ✅HIGH ACCURACY AMPERAGE METER - 0.1 amp resolution for AC DC Amps measurement for 200A, 1A amp resolution for 1000A. Ideal inrush clamp meter for troubleshoot electrical mechanical problem of cars motors boat HVAC household appliances safely and accurately..
  • ✅LARGE DIGITAL DISPLAY - Well built with backlit LCD for visibility in dimly light areas. Extensible t....
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

INGCO Clamp Meter 1000A True RMS 6000 Counts for AC Current AC/DC Voltage VFD LOZ NCV Capacitance Resistance Continuity Temperature DCM10004

  • The clamp meter can measure AC current, AC/DC voltage, capacitance, continuity, resistance, frequency or duty cycle, and temperature..
  • Automatic range turntable design and flashing light make it more convenient for you to operate the clamp meter. It switches off automatically without....
  • The orange backlight is on, and the buzzer sounds when resistance value 80V or current > 3A with....
  • Data hold function is designed for easy reading. VFD mode for higher accuracy readings.
  • WORRY-FREE ORDER. If you are not 100% satisfied with our clamp meter, we offer you 90 days refund or replacement. If you have any problem, please....
Check Stock

Tenma 72-7228 True RMS Compact Clamp Meter

  • 【Reliable Clamp Multimeter with True RMS】Accurate AC/DC voltage current, resistance, capacitance, frequency, temperature, diode, continuity test and non-contact AC voltage detection, the Clamp Meter is fully functional and easy to use for labs factories radio-technology and household..
  • 【Auto-Ranging with NVC】The meter will automatically select the appropriate auto range.
  • NCV detects the existence of AC voltage on conductors and cables in-wall, troubleshooting electrical problems in a safe and user-friendly way.
  • 【Clamp Measuring】Clamp jaw measures AC current up to 28mm without interrupting the circuit, which makes it much safer to use on mains cables and high current loads in vehicles.
  • 【Continuity Test & Overload Protection】 Designed to Safely and Accurately Confirm the Circuit Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire..
  • 【Features】high resolution, large backlit LCD screen and clamp light to improve visibility in dark place. Low battery display and automatic power off after 15 minutes inactivity. A soft zippered pouch included keeps everything neatly together and organized.
  • portable to carry and use. Widely used in your life..
Check Stock

Klein Tools CL120 Digital Clamp Meter Auto-Ranging 400 Amp AC AC/DC Voltage Resistance Continuity Non-Contact Voltage Tester Detection

  • Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance and continuity via test-leads.
  • Non-contact voltage tester integrated into the clamp jaw.
  • Backlit LCD for ease of viewing in low light.
  • Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands-free operation.
Check Stock

LTGEM Hard Case for Fluke 323/324/325/374FC-AMZN/374FC 600AC/DC Clamp Meter Clamp Multimeter AC-DC TRMS Mesh Pocket for Accessories.

  • PERFECT FIT: We've specifically designed the case to fit your Fluke 323 True-RMS Clamp Meter. OUTER DIMENSIONS: 9" L - 4" W - 3" H..
  • 100% SAFE: Hard quality EVA material is Semi-waterproof, Shockproof and Durable to protect your Clamp Meter from impacts and splashes..
  • TRAVEL PARTNER: This hard case for Clamp Meter is lightweight and compact to fit in your backpack, carry-on or luggage for improved traveling....
  • CONVENIENT DESIGN: Steady detachable hand strap for portability, Inner Mesh pocket design perfectly for accessories, Smooth but strong 360 degree....
Check Stock