ReviewsClamp on Gas Flow Meters

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

...are x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..

Check Stock

LZQ-7 Flowmeter 2-20LPM Acrylic Air Gas Flowmeter with Control Valve for Measuring Controlling Gas Flow

This gas meter is connected to hose to measure unidirectional gas flow.
Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
It is simple to use, and has 8mm barbs for convenient connection to hoses.
Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, , compressed air, argon.
Mainly used for detecting the flow, control flow and can be used in industry.

Check Stock

Balacoo Shut Off Clip - 24pcs Siphon Hose Flow Control Clamp Shut Off Plastic Tubing Clip with Gear

The hose clamp is widely used in analytical instruments, laboratories, pharmaceutical industry, chemical industry, gardening and other fields..
Adjustment pipe clamps can all be done with one hand. Very convenient..
6 position tube lock: multiple gears can control the flow rate..
The Tube Clamps Kit is suitable for garden micro-spray and other fields that need hose flow control and stop flow..
The Shut Off Hose Clamp is mainly used to clamp the hoses to regulate the flow or cut off the hoses..

Check Stock

Gas Flowmeter, LZQ-7 Flowmeter 1-10LPM Flow Meter with Control Valve for Oxygen Air Gas

INSTRUCTIONS -- This gas meter is connected to hose to measure unidirectional gas flow.
MADE OF HIGH QUALITY ACRYLIC -- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
IT IS SIMPLE TO USE -- It is simple to use, and has 8mm barbs for convenient connection to hoses.
MEASURABLE GAS -- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon.
MAINLY USED FOR -- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.

Check Stock

JohnDow Industries JDI-FST15 15-Gallon Gravity Fed Steel Portable Fuel Station Gas Can Red

FAST & EFFICIENT TO Fill: The 8ft kink free hose of the gas caddy ensures maximum flow and the tank is filled at the fastest speed.Wide diameter neck provides a larger opening for fill, without spilling or waste of fuel. And ergonomic hand crank, labor-saving and improve efficiency..
SAFE: Friction will cause static electricity in the process. The design of anti-static grounding clamp,it can prevent accidental static discharges and eliminate static electricity , so its safe to use. The fuel caddy is deal for storage of gasoline and diesel..
MOVABLE & EASY TO USE: Wheel and Hand pusher design for easier mobility and transportation. The design of easy to read vent/fuel level gauge makes it convenient for you to observe the remaining oil in the. Reversible rotary hand pump can suck the fuel remains in the kink free hose back to the fuel tank ,convenient and waste free..
LARGE CAPACITY: 30 gallon large capacity fuel storage space design. The fuel transfer tank is ideal for gas powered lawn and garden tools, automobiles, ATVs and a wide range of fuel powered pieces of equipment..
STURDY & DURABLE: The gas tank is made of high quality material. Heavy-duty iron tank is sturdy and durable,not easy to deform.Therefore, it has a long service life..

Check Stock

Argon Co2 Gas Flow Meter Scale Tester Measure Flowmeter for Mig Tig Welder Welding 1PK

Suitable for the Nozzle Caliber range of 4 - 30mm.
Flowmeter tester scaled from 0 - 25 litres per minute in one litre graduations, used for testing the gas flow at the Mig or Tig torch.
Simply place the tester over the Mig or Tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases..
Designed to check gas flow on Tig or Mig torches..

Check Stock

Electric Drill Pump for Water Gasoline Oil Diesels Fluid Transfer Pump Mini Hand Self-Priming Quick Pumping Speed

High quality drill pump- Fine workmanship, plastic, durable and has a long service life..
Feature- Large flow, stable performance and high efficiency, easy installation..
Quick- Pumping speed is fast, can pump 20-30 L water per minute(depends on the rpm of drill)..
Convenient to use and store- Install all the drill chucks, you can use the electric drill to get the pump, easy and convenient to use. Compact and light weight design, portable and easy to store..
Flow speed- The recommended speed is 1500-3500 rpm. The pump head and flow are related to the speed. The higher the speed, the higher the head and flow. 1500 rpm, the pump head is about 1.5 meters, the flow is about 15L per minute. 3000 rpm, the pump head is about 3 meters, and the flow rate is about 30L per minute..

Check Stock

RDS MFG INC 72118 Transfer Tank 90Gal

...ispense or siphon fuels with ease, making pumping and refilling efficient by reversing the cranking direction. You can fill gas storage tanks faster without working up a sweat while safely transferring fuel..
Transport Effortlessly & Easy to Use: The anti-static ground clamp can prevent static discharges and eliminate static electricity. An accurate fill gauge lets you quickly determine your fuel level at a glance, reducing the risk of overflows. Heavy-duty 8" wheels and 2" wheels transport your caddy through the toughest terrains with ease. Filler neck with gas cap, handy tube holder, and leveraging push handle are also equipped..
Speedy & Convenient Refueling: The 9.8 ft kink-free hose with nozzle ensures maximum flow and the fastest speed. The wide diameter neck provides a larger opening for refueling without spilling or wasting fuel. And a hose hanger is provided for your hose's easy storage..
Highly Robust Steel Tank: Made of durable 201 stainless steel material, this gas tank with pump is capable of handling changing weather conditions, and is resistant to UV radiation and dents. This high-quali....

Check Stock

Type K Pipe Clamp Temperature Lead Probe HVAC Pipes Jaw Clip Plumbing Clamp

Good for Multimeters, clamp Meters and thermometers that accept a type K temperature probe..
This K-type probe pipe clamp's operation temperature: -40~200℃..
Probe connection type: K-Type pipe clamp..
A good K type pipe clamp accessories for temperature measurement..
Lead thermocouple clip,Suitable for industrial temperature measurement..

Check Stock

HighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator

▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580..
▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder..
▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc..
▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 50 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank..
▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc..

Check Stock

Golden Flame 18\ x 6\ (Natural Gas) Fire Pit and Fireplace H-Burner (304 Series SS) w/Connection kit

18" (Hi-Flow) Natural Gas SS Fireplace H-Burner (Size: 18" W x 6" D).
Extra Thick 304-Series Stainless Steel (42% Thicker than most major Brands).
Holes are Machine Drilled and not punched. (Punched holes can cause a loud whistle).
Includes * Whistle Free * Connection Kit w/Brass Fittings and Damper C-Clamp.
Rated BTU's: 90,000 10 Year Warranty (Twice as long as other major Brands).

Check Stock