ReviewsClamping Cylinder

Mostbest Head Stud Replacement Kit for SBC Cylinder Head Stud Set # 1525-Stud/ 279.1001

  • ❤️This kit has 14 long studs, 4 medium length, and 16 short studs..
  • ❤️ This listing is for the sbc head stud kit. We have used this kit on all of our sbc engine buildups, and the fitment is perfect. You will receive every stud needed to install both cylinder heads on your engine..
  • ❤️These head studs are made from aircraft quality 8740 high tensile strength chrome moly steel. They are twice as strong (190,000 psi steel alloy) as the stock head bolts. Kit that comes complete with 12 point hex nuts and washers. Very similar or rather identical in design and function to the ARP kits..
  • ❤️Studs make head installation a lot easier as the studs align the head and hold the head gasket in place.
  • ❤️ They clamp much better since the stud is loosely threaded into the block and the clamping torque is generated at the stud-nut interface rather than the block-bolt interface.
Check Stock

Valve Cover Gasket Camshaft Adjuster Eccentric Shaft Actuator Seal Oil Filter Adapter Housing Oil Cooler Valvetronic Gaskets Compatible with BMW E60 E82 E90 E91 E61 E70 N51 N52 Engine Seal Kit

  • Our Engine Gasket meet or exceed the original equipment specifications providing the finest sealing products available.
  • Cylinder Engine gaskets made of premium molded rubber are designed for engines..
  • Oil resistant, high temperature resistant, corrosion resistant.
  • The rubber deforms to provide even clamping along the entire valve cover, while grommets and other design features prevent overtightened..
Check Stock

Engine Valve Cover Gasket Compatible with 05-17 Ford Escape Focus Fusion Ranger Transit 04-13 Mazda 3 5 6 B2300 CX-7 MX-5 Tribute 05-11 Mercury Mariner Milan L4 2.0L 2.3L 2.5L Cover Seal

  • Our Engine Gasket meet or exceed the original equipment specifications providing the finest sealing products available.
  • Cylinder Engine gaskets made of premium molded rubber are designed for engines..
  • Oil resistant, high temperature resistant, corrosion resistant, engine oil stop leak.
  • The rubber deforms to provide even clamping along the entire valve cover, while grommets and other design features prevent overtightened..
Check Stock

IRWIN QUICK-GRIP C Clamp, 4-Inch (225104)

  • Clamp features a double-rolled thread for faster clamping and increased durability.
  • C-clamp has a larger swivel pad to reduce marring on work surfaces and increase stability.
  • Larger handle for greater clamping pressure with less effort and reduced hand fatigue.
Check Stock

DEJUN Pneumatic Tapping Machine 360° Multi-directions Pneumatic Air Tapper Universal Flexible Arm Drilling Threading Machine M3-M12 Tap Collets

  • High Configuration - strong power pneumatic motor, 400rpm/min.
  • oil-water separator separates the oil and water from the air to ensure the normal operation.
  • the folding arm can rotate 360°on the workbench and tap vertically, 1000mm working radius..
  • Premium Quality - the pneumatic tapping machine adopts high strength, aluminum alloy, strong hardness, high efficiency, stable performance, simplified operation..
  • Overload Protection - our pneumatic air tapper has the clamping cylinder with overload protection device, when the tapping torque exceeds the rated torque, the adjustable safety clutch is separated to avoid tap damage..
  • Applicable Materials - can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials..
  • Applicable Fields - suitable for all machinery manufacturing industries, mold/plastic/printing machinery, packaging machinery factories, engineering machinery, automobile and motorcycle parts, aviation engines, rolling stock and other general machinery industries..
Check Stock

Bessey One Hand Trigger Clamps Medium EZR-SET

  • Set of 2 Track Clamps 6" Capacity Throat Depth 2 3/8" for use on track saw guides, 100 lb force.
  • Quick clamping, smooth operating, consistent clamping force for track saw quides & general clamping /spreading.
  • 4 5/8" to 12 1/8" spreading capacity, simple push button for reversing fixed jaw for change to spreading, no tools needed.
  • V-Grooved, non marring pressure pads included.
  • "Step Over" design jaw allows clamping over obstructions, includes ergonomic comfortable soft grips for easy clamping.
Check Stock

Bessey DUO65-8 24-Inch DuoKlamp One Hand Clamp/Spreader

  • Just turn the knob to change from clamping to spreading while using only one hand.
  • Large flat clamping jaws with soft pads allows clamping sensitive surfaces, right angles and both rounded and pointed work pieces.
  • 24" capacity with 800 lbs of clamping and spreading force.
  • Innovative pump lever allows effort free clamping or spreading.
  • Quick release of jaws with the push of a buttonDescriptionJMCDUO65-8 Features: -DUOKLAMP. -UNSPC CODE: 27112100. -Clamps Clamps mro plant maintenance clamp. -3 1/4IN x 24IN ONE-HANDED. Product Type: -Clamps..
Check Stock

Pneumatic Tapping Machine DEJUN 360° Multi-directions Pneumatic Air Tapper Universal Flexible Arm Drilling Threading Machine M3-M12 Tap Collets with Taps

  • Premium Quality - the pneumatic tapping machine, not electric but only air powered, adopts high strength, aluminum alloy, strong hardness, high efficiency, stable performance, simplified operation..
  • Overload Protection - our pneumatic air tapper has the clamping cylinder with overload protection device, when the tapping torque exceeds the rated torque, the adjustable safety clutch is separated to avoid tap damage..
  • High Configuration - strong power pneumatic motor, 400rpm/min.
  • oil-water separator separates the oil and water from the air to ensure the normal operation.
  • the folding arm can rotate 360°on the workbench and tap vertically, 1000mm working radius..
  • Applicable Fields - suitable for all machinery manufacturing industries, mold/plastic/printing machinery, packaging machinery factories, engineering machinery, automobile and motorcycle parts, aviation engines, rolling stock and other general machinery industries..
  • Applicable Materials - can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials..
Check Stock

INTBUYING Pneumatic Air Tapping & Drilling Threading Machine Air Drill Tapper Flexible Arm (M3-M12 Tap Collets Vertical)

  • Tapping Ability of Pneumatic Tapping Machine: steel/aluminum: M3-M12, stainless steel: M3-M8, Range of Rotation: 400rpm(stepless speed regulation), Working radius:39.37"(1.0m),Working pressure:0.6-0.8Mpa.
  • Pneumatic Tapping Machine: Avoid the limitations of manual tapping, time-saving and labor-saving, no damage to thread, and the tap is not easy to break. Wide range of activities, heavy workpiece do not need to be moved.Smaller gas pressure and gas (5-8Kg / cm2), large torque output..
  • Premium Quality: M3-M12 Pneumatic Air Tapper adopts high strength aluminum alloy, smooth running, low noise, stable performance, simplified operation. Clamping cylinder with overload protection device can avoid tap damage.
  • Applicable Materials: M3-M12 Air Tapper can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials..
  • Heavier work matter does not need positioning device or mobile, installed plus universal head can easily get.Rapid fast positioning and high cutting speed, increased production capacity..
Check Stock

BESSEY KRE3550 PAIR 50' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 50" KRE3550 clamps: 50" of clamping capacity, a 3-3/4" throat depth, a 10" to 52-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock