ReviewsClamping Plate

jxgzyy 5 Inch Bench Vise Swivel Base Table Top Clamp with 360 Swivel Locking Base Cast Iron Workshop Bench Vise for Crafting Woodworking

Heavy Duty Casting: The durable Workshop Bench Vise is made of cast iron structure with blue power coated , resistant to corrosion ，rust and easy to clean . Designed for durable use ..
360 Degree Swivel Base ：360 dergree swivel base design , perfect for clamping from any angles. You can adjust to the angle that suitable for your work ..
Grooved Jaw ：The grooved jaws design provides additional friction and grip your workpiece firmly .Provide you with anti-slip performance and stable clamping ..
Easy to install : With slots in base plate ,you can mounted it on your workbench quickly within few minutes ..
Wide Applications: This bench vise is designed for home, workshop, professional use, general purpose and light work, ideal for woodworking, cutting ，drilling, gluing, metalworking ....

Check Stock

SUNMON Quadcast Mic Stand with Boom Arm Clamps For HyperX Quadcast Microphone

【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Assembly clip】 - suitable for mic arm desk mount and wall-mounted installation, Adapt to different use environments. It can be used as desktop microphone holder clamp, architect lamp clamp, magnifier lamp clamp, camera holder clamp..
【Wide range of application】 - the bracket socket is suitable for most support pipes of 11-13mm. It is installed on a horizontal table with a maximum clamping thickness of 2.75"/7cm. It is installed on a vertical side plate and the maximum clamping thickness is 1.57"/ 4cm..
【Compatibility】 - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note: Not Included Mic Stand and HyperX Quadcast Microphone..
【Refused to break】 - heavy metal desk clamp, professional desktop stress structure effectively remove the stress generated when pushing and pulling the mic desk arm, reducing the possibility of desk clamps breaking..

Check Stock

Bessey PC-34DR Pipe Clamp, Traditional, 2-1/2 in.

Features a unique base that supports the work piece and allows the clamp handle to clear the top of the work surface.
Four plate clutch for high clamping pressure, quick release.

Check Stock

MIZUGIWA One Piece High Profile Scope Mount for Picatinny Weaver Rail 1″ Dia

One Piece Scope Mount with Integral two 1″ Rings.
Fits all scopes with a one inch body tube.
Full Length Locking Plate to Guarantee Easy Installation and Secure Fit..

Check Stock

Conquer Bicycle Wall Mount Repair Stand Bicycle Rack - Rotating Head

Locking 360 ° roating head adjusts clamp to any angle, clamp top tube or seatpost.
Sturdy steel construction, mounting flange has 5 holes (hardware not included).
Quick release clamp with spaces for gear/brake cables, allows for clamping of tubes from 30mm to 75mm.
Repair stand angle can be adjusted at wall plate.
Quickly detaches from wall when not in use.

Check Stock

Adoles 35mm Concealed Door Hinge Jig， Accurate Locking Cabinet Hinge Jig， Aluminum Alloy Material Comes With Clamping Device For Easy Carrying And Use.

【Premium Aluminum Alloy Material】The 35mm concealed hinge jig is made of high-quality aluminum alloy material, This is a set of guide tools for installing concealed hinges very accurate..
【Adjustable Double Cleat Design】Adjustable double clamping plate for accurate positioning, clamping 15-25mm thickness of wood panels, convenient for fast multi-angle drilling, and installation of cabinet door hinges..
【Focus On Practicality】Suitable for most 35mm cabinet hinge jig clamps, with an adjustable opening depth of 10-15mm and adjustable drilling edge distance of 3-7mm..
【Upgrade Three Bearing Drill Sleeve】Upper, middle, and lower 3 bearing drill sleeve, the total height of drill sleeve 2cm, the small swinging amplitude of drill bit for accurate hole opening..
【Perfect Choice】Easy to use with any drill, you don’t have to be a well-equipped woodworker to install these hinges. Perfect for any handyman who needs hinges made..

Check Stock

VideoSecu Side Clamping Bookshelf Speaker Wall Mount - Sturdy Steel Gripping Bracket (one Pair) 3LH

Easy Install, 360 degrees pan and 10 degrees up or down tilts adjustable.
Heavy duty steel construction with wall plate cover. Standard mounting hardware and user manual included.

Check Stock

JessEm 02120 Mast-R-Lift II Router Lift with Top Plate and 10-Piece Insert Ring Kit with Caddy for Router Plates and Lift Systems (2 Items)

Bundle Includes: JessEm 02120 Mast-R-Lift II Router Lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
Built-In Locking Mechanism: Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations.
Compatibility: With a standard top plate, Mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system.
Sturdy Construction: Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off.
Lift Shafts: The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.

Check Stock

16pcs Saw Blade Bushing Set Saw Blade Adapter Ring, Angle grinder inner aperture conversion gasket，1 Inch to 20 mm, 1 Inch to 5/8 Inch, 7/8 Inch to 5/8 Inch, 20 mmto 5/8 Inch,4 per Model

Main specifications:003cbr003e 1" - 20mm ,003cbr003e 1" - 5/8" ,003cbr003e 7/8" - 5/8" ,003cbr003e 20mm - 5/8" 003cbr003e..
Washer thickness: about 1.2-1.3mm, the washer should be the same thickness as the saw board of the saw blade, or a little thinner for more stability..
For saw blade clamping plate and electric saw clamping, the hole is larger, so we need to use washers to reduce the diameter! Saw blade reducing ring, inner hole switching ring, saw blade inner hole switching reducing ring, it is convenient to use with saw blade splint, electric grinder and electric saw..

Check Stock

VideoSecu 2 Heavy Duty PA DJ Club Adjustable Height Satellite Speaker Stand Mount - Extends 26.5 to 47 i.e Bose Harmon Kardon JBL KEF Klipsch Sony Yamaha Pioneer and Others 1B7

Height adjustable from 26.5 inch to 47 inch (673mm - 1193mm).
Side clamping top plate can adjust width from 5.5 to 11 inches (140mm-279mm). For width adjustment, #3 Phillips bit is recommended..
The top plate can pan 180 degrees and tilt +/-10 degrees for level adjustment.
Adjustable screw-in rubber feet keep unit level on carpet or hard floor.
Concealed wire management, Stability ensured.

Check Stock

UTEBIT 50mm Arca Swiss Quick Release Plate Aluminum QR Clamp Adapter Set with 3/8'&1/4' Screw Hole and Built-in Bubble Level Compatible for Manfrotto DSLR Camera Tripod Ball Head Monopod

【Arca-Swiss quick release plate】Straight-grain knobs (non-apron design, no idling). Compared with ordinary quick release boards, it is more slip resistant and anti-dropping. Compatible with Arca-Swiss standard quick release plate of Manfrotto be free. ※Clamping range: 40-45mm.
【Build In Bubble Level】There are three levels of level included (both sides of the quick release plate & the side of the locking knob), to help you perceive your position more accurately..
【Corrosion resistance & anti-skid】 The quick release plate is made of high-strength aluminum alloy material, which has undergone anodized surface treatment, which is corrosion-resistant and wear-resistant.
it has a non-slip function, which can well protect the camera. ※L-shaped inner hexagonal small wrench is included. The design is simple and light. Both ends of the (wrench) can be used..
【With ruler & 3/8 to 1/4 screw】you can use the attached 1/4 screw to directly connect to a tripod/monopod for indoor and outdoor photography..
【Size & Product List】1xMount:7.6x5cm,1xQuck release plate:3.7x5cm,1xHexagon wrench. Please look carefully that the size suits yours..

Check Stock