ReviewsClamping System

Segway Ninebot Phone Mount, Adjustable Electric Scooter eMoped Bicycle Handlebar Phone Holder, Fits All iPhone's, 12, 11, X, iPhone 8, All Samsung Galaxy, Holds Any Phone 4-6.5 inches Cellphone

  • Suitable to ALL Sizes of Phones: The clamping width range of the phone mount is 58–90 mm which can be adapted to most mobile phones with 4–6.5-inch screens. Holds iPhone 12, 11, X, iPhone XR, iPhone 8, 7 Plus. Samsung Galaxy S7, Galaxy S9, OnePlus 3..
  • Applicable to Multiple Vehicle Series: The phone mount is applicable to kcikscooters, bicycles, electric motorcycles with 18 to 36mm handlebar diameter. Such as electric scooter ES series, Max series, F series, Ninebot eMoped..
  • Easy to Install: It can be installed by one-handed screwing without using a wrench. Please find more installation steps in the below user manual and kindly note that before installation, please make sure the vehicle is off and parking on the kickstand..
  • 600,000 Vibration Tests on Adjusting Knob: The knob-clamping system adopts stainless steel screw with fine teeth and double wires, making the clamping tighter. Passing 600,000 vibration tests, the phone will be clamped firmly during fast riding..
  • Humanized Design: There are three inside facets covered by non-slip soft rubber pads to protect the phone from scratches. For the convenience of users, the lower side clamping part is designed to avoid the phone buttons, charging port, and earphone port..
Check Stock

Steel Force PFS300 2.5 Amp 6000-12,000 OPM 9×4.5 inch Sheet Sander with Super Large Sanding Base and Variable Speed

  • ALUMINUM BASE PLATE – Tacklife orbital finish sander features precision-machined aluminum sanding plates, far superior to other plastic base plates, which develops even sanding and long-lasting durability. Hook and loop pad for easier and quicker sandpaper changes..
  • RELIABLE & FAST CLAMPING SYSTEM – The sander provides a reliable clamping and pad design that accepts multiple sanding sheets including stick-on paper. If you adhere a piece of cloth to the sanding base, you will get a polisher..
Check Stock

T Track Hold Down Clamps Woodworking T Slot Clamp 20mm Dog Hole Clamp Quick Acting Aluminum Alloy

  • Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
  • Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....
Check Stock

Wolff Twice as Sharp Pro Scissor Sharpener

  • Sharpens Fabric, Industrial and Grooming Shears Quickly and Easily. Comes with Training Video and Manual..
  • Free Floating Arm System & Sealed Bearings Provide Years of Maintenance Free Use.
  • Honing Wheel Makes Scissors 2 to 6 Times Sharper.
  • Clamping System Adjusts from 0 to 55 Degrees to Match Angles Consistently.
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • ...mposite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching, as a golf club vise, and more. For mid-torque bench vise clamping applications see or SH60 grey medium density vise pads..
  • PROTECTIVE SURFACE – While incredibly tough, our 4″ vise soft jaws specially textured surface won’t mar, scratch or discolor delicate surfaces. Tested safe for clamping on cerakote, chrome, aluminum, wood, plastic, painted surfaces, and more..
  • AWARD WINNING DESIGN – Winner of the 2022 Pro Tool Innovation Award for Clamping Accessories..
Check Stock

HHIP 2301-3016 S16T-TNER3 Internal Threading and Grooving Tool Holder

  • Excellent all-purpose system for threading and grooving.
  • Very strong insert design and wide insert selection and range.
  • Clamping system draws the insert consistently back into the pocket for superior repeatability.
Check Stock

Roadformer 5" Exhaust Clamp Narrow Band Stainless Steel (2 Pack)

  • This 5" exhaust clamp is made in Stainless Steel. Used to joint 5 inch OD pipe slip fit into ID pipe for connection. Two pieces included in a single pack.
  • Pre-attached hardware for fast, easy and accurate installation, Roadformer Clamp technology provides simple, effective way to maintain and repair your exhaust system.
  • Grade 10.9 bolts provided superior capability of clamping and sealing. This narrow band clamp does create over a ton of clamping force without crushing pipes, resulting in strong and serviceable joint. The working torque is in the range of 40-50 ft-lbs.
  • Our innovation Reaction Block Technology provides a full 360-degree equal distribution of stretching force, prohibiting pipe distortion, durable installation without damage to pipe ends.
  • Roadformer Clamps set industry standard in premium quality and affordable price. Roadformer private labeled products do means Quality, Trust and Responsibility.
Check Stock

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

  • ...mance in the exhaust systems, and high quality in durability and reliability..
  • PERFECT SEALING CAPABILITY - These butt joint exhaust band clamps have been adopted high-strength fastening parts, providing the real leakage-free sealing capability. It is perfect for 2.5 inches exhaust pipes or mufflers..
  • 360 DEGREE FULL CLAMPING - Designed with an entire 360-degree full clamping area, the stainless steel exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system..
  • WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
  • MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to contact us, and we will make sure to provide the best service..
Check Stock

Jorgensen Cabinet Master 24-inch 90° Parallel Jaw Bar Clamp, 2-pack…

  • Tips: The jaws are not parallel when opened, they are preset by an inclination of +/-0.5°, when you tight up and clamp the items, the clamps will be parallel..
  • Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using this clamp..
  • Deep 3-3/4 inch jaw depth for optimized pressure distribution. Secure locking system prevents jaws from slipping. Features ergonomic designed 2 component molded soft grip handle..
  • Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading..
  • This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure..
Check Stock

Diamondhead USA Front Combat Sight Diamond with Tritium Black

  • Flips up quickly and smoothly for rapid deployment.
  • Folds down fast with the push of a button.
  • Proprietary deployment system ensures sight stays up securely & remains zeroed in combat situations.
  • Mil. Spec. Type III hard coat anodized 6061 T6 aircraft aluminum, finished in Black or Flat Dark Earth (FDE).
  • Easy installation with proprietary clamping system, providing secure attachment to all Mil. Std. 1913 Picatinny Rails.
Check Stock

IRWIN QUICK-GRIP C Clamp, 4-Inch (225104)

  • Clamp features a double-rolled thread for faster clamping and increased durability.
  • C-clamp has a larger swivel pad to reduce marring on work surfaces and increase stability.
  • Larger handle for greater clamping pressure with less effort and reduced hand fatigue.
Check Stock