ReviewsClamps For Exhaust

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....

Check Stock

Dual 2.5" Exhaust Pipes Fits 1999 - 2008 Chevy Gmc Silverado Sierra 1500 2500

(2) LH / RH Exhaust Pipes 2.5 (2 1/2) " O.D.
(6) Exhaust Clamps 2.5 " (2 1/2)", (4) Hangers.

Check Stock

BLACKHORSE-RACING 1.75 1 3/4 Accuseal Clamp Butt Joint Narrow Band Exhaust Seal Clamp

-- Size: Minimum Diameter: 1 3/4" (1.75").
-- Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized....
-- Seal exhaust band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique....
-- Save Time and Effort: Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is....

Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.

Check Stock

Coffman’s Shorty Slip-On Exhaust for Kawasaki Ninja 400 Z400 2018-2021 Sportbike with Blue Tip

【Fitment】：Slip on Muffler Exhaust For ninja 400 Z400 2018 2019 2020.
【Great Sound Quality With Removable Baffle】: This ninja 400 exhaust muffler sounds great. You’ll also love the excellent sound quality this....
【Stainless steel & Aluminum Body】: As for the looks, the ninja 400 exhaust system has a carbon fiber finish, which makes it look really nice. The....
【Extremely Easy to Install】: Installing the exhaust on you z400 bike is also relatively easy as you just need to slip it right on and then install....
【Complete Accessories 】: The ninja 400 muffler exhaust come with complete accessories include DB killer, springs and hooks, stable clamps, mid....

Check Stock

KIMISS 304 Stainless Steel V-band Clamp, Universal Car 5" Turbo Exhaust V-Band Flange Clamp Kit

【Premium Quality】Made with high strength stainless steel for maximum durability.It is not easy to rust and has strong resistance，so don't worry about changing the product all the time, it will last a long time.Guarantee will not let you down..
【Precise design】Easy to install and remove without damage. Depending on the design, this type of clamp is less prone to leaks, and is a good way to secure parts together without the use of welds..
【Perfect Compatibility】Perfectly universal fit for car turbo exhaust system,easy to use.so don't worry about not matching your model,it will suit your car very well..
【Cost-effective】These Walker band-style exhaust clamps give you a 360 degree seal that won't leak he clamps come with pre-attached hardware and high quality bolts for high strength and temperature durability,the value is higher than other product ..
【Great For Racers and Tuners】This V-band clamp is great for racers and tuners, these clamps make it easy to remove parts to gain access to vital components easily..

Check Stock

VIVOHOME 4 Inch 25 Feet Aluminum Flexible Dryer Vent Hose Air Ducting Non-Insulated with 2 Stainless Steel Clamps for HVAC Ventilation and Exhaust Pack of 1

IDEAL CONNECTOR - Used in exhaust fan applications to move and transport air, which increases airflow and eases connections between spaces.
It's compatible with front-mounted and top-loading dryers/fans.
ADVANCED STRUCTURE - Made of heavy-duty aluminum foil laminated and PET for durability.
3-layer design with flame-retardant coating, which is resistant to corrosion and temperature variations.
It only takes up little space when not in use due to the flexible length of inline fan.
EASY INSTALLATION - Super flexible and super simple to set-up.
With 2 bonus metal screw clamps, it can be easily slid right onto the duct fans, exhaust vents, carbon filters or light reflectors, and firmly fixed on the joints.
The attached clamps can help you connect the vent more closely.
Please wear gloves to avoid being injured during assembly.
DUCTING PARAMETERS - 4" in diameter, 25 ft long when fully extended and can be folded down to 13.5".
Thermal endurance ranges from -22 to 266 F (-30 to 107 C).
WIDE APPLICATIONS - Commercial and residential air duct solutions.
Widely used in HVAC applications, bathroom venting, stove exhaust, dryer ventilation, kitchen cooking exhaust, planting room or greenhouse air circulation, etc.

Check Stock

Vent Systems 5\ inch to 4\ inch Duct Reducer Adapter Connector Fitting Pipe Increaser Reducer Cone for HVAC Ventilation Systems, ABS Plastic PVC pipe 125 to 100 mm

6" by 8' DUCTING WITH FLEXIBLE SHAPE: This flexible duct is 6 Inches in Diameter and 8 Feet Long. It comes with 2 Duct Clamps Incuded in The Box.
3-LAYER TOUGH: Keep your ventilation system free of rips and pin holes. This ducting is built with a layer of Heat Reflective Fire-Retardant Aluminum, Covered with PET for additional endurance and Steel Wire Helix to preserve the Ducts shape.
FLEXIBLE AND EASY TO USE: Our 6 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector. We include a pair of 6 Inch Clamps to make the installation a breeze.
6" DIAMETER WITH ADJUSTABLE LENGTH: This Ventilation Duct is 6 Inches in diameter and comes in one 8 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife.
VARIETY OF APPLICATIONS: Our Ducting Is suitable for any Heating Ventilation & Air Conditioning (HVAC) Purposes. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other applications you have in mind.

Check Stock

Exhaust Clamps Band Clamp 5" Lap Joint - Stainless Steel Lap Joint Exhaust Band Clamp With 1 Block 2Pcs For 5" Od To 5" Id Exhaust Pipe, Muffler, Elbow And Exhaust Tubing Connection(2 Pack)

HIGH QUALITY ---- Our 5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water..
Universal fitment.Joins Joins 5" OD Pipe to 5" ID Pipe, made of 304 stainless steel. Besides, we also provide 4 different sizes to fulfill your needs. You would better measure before pruchase..
These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
Easy to install:Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service..
NOTE: Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !.

Check Stock

Floshine 8PCS DIY Stainless Steel 3 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 3.0 Inch Exhaust System…

DIY Exhaust System–Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
High-quality–Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
Products in the kit– 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
Easy to installation–Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
Fitment–Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 3.0 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.

Check Stock

TerraBloom 6 Inch Aluminum Flex Duct - 8 FT Long, Flexible Ducting with 2 Clamps, 3 Layer HVAC Ventilation Air Hose - Great for Dryer, Grow Tent, Green Houses, Household HVAC Venting

6" by 8' DUCTING WITH FLEXIBLE SHAPE: This flexible duct is 6 Inches in Diameter and 8 Feet Long. It comes with 2 Duct Clamps Incuded in The Box.
3-LAYER TOUGH: Keep your ventilation system free of rips and pin holes. This ducting is built with a layer of Heat Reflective Fire-Retardant Aluminum, Covered with PET for additional endurance and Steel Wire Helix to preserve the Ducts shape.
FLEXIBLE AND EASY TO USE: Our 6 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector. We include a pair of 6 Inch Clamps to make the installation a breeze.
6" DIAMETER WITH ADJUSTABLE LENGTH: This Ventilation Duct is 6 Inches in diameter and comes in one 8 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife.
VARIETY OF APPLICATIONS: Our Ducting Is suitable for any Heating Ventilation & Air Conditioning (HVAC) Purposes. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other applications you have in mind.

Check Stock