ReviewsClass 2 Power Supply

Hyper Tough HT Charge 20V Max Fast Dual Charger

  • World Wide Input Voltage 100-240VAC 50/60Hz OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 Days Refund. 24 Months Exchange..
  • UpBright New Global 9V AC / DC Adapter Compatible with Hyper Tough AQ85000G 8-Volt Max 8V Lithium-Ion 8VDC Li-Ion 8 VDC Rechargeable Battery HyperTough Cordless Rotary Tool 9VDC 500mA 9.0V 0.5A DC9V 500 mA 9 V 9.0 VDC Switching Class 2 Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU.
  • Compatible with: EOBAR Power Model: EBS0050A-0900500AU EBS0050A0900500AU 9V 500mA Class 2 Power Supply.
  • !!!Note: Rechargeable batteries don't last forever, the average battery last 1 to 3 years. If the battery is old/dead, it will not accept a charge. But not charger's problem. If you're not sure whether battery or charger is dead or not. You must have a volt meter in order to tell whether or not a charger is working..
Check Stock

SFB-1500D - Sundown Audio Monoblock 1750w RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Sundown Audio SIA-2500D Monoblock 2500W RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Sundown Audio SFB-3000D 3000W RMS Class D Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Rockville DBM25 1400 Watt 2 Channel Marine/Boat Amplifier Amp W/Silicone Covers

  • Rockville DBM25 1500 Watt Class-AB 2-channel Marine amplifier with terminal covers.
  • Rockville DBM25 1500 Watt Class-AB 2-channel Marine amplifier with terminal covers. Cea Compliant Power Ratings:. 2 Ohm: 185 Watts x 2 Channel. 4 Ohm: 125 Watts x 2 Channel..
  • Peak Power ratings:. 2 Ohm: 750 Watts x 2 Channel. 4 Ohm: 500 Watts x 2 Channel. 4 Ohm Bridged: 1500 watts x 1 Channel. Fully adjustable 12Db/ Octave Crossover with differential circuitry..
  • Minimum THD at rated power: 90 dB. Frequency response: 10 Hz - 50 KHz. Damping factor: 003e100 @ 100Hz. (2) 25 amp ATC fuses. Painted conformal coating PCB board (uses 2577 waterproof glue)..
  • Stainless Steel end panels are rustproof. All screws and mounting hardware are stainless steel and rustproof. Bottom panel is aluminum and rustproof. High-speed MOSFET power supply. Studio-grade BIPOLAR Output stage transistors..
Check Stock

FiiO AM3 Balanced Output Headphone Amplifier Module for X7 Portable High-Resolution Audio Player, Titanium

  • ...ayer. Not only are "H" type heat dissipation and VC liquid cooling technologies adopted, the bluetooth mp3 player M17's 151g unibody aluminum alloy frame also effectively transfers heat out of the device. Finally, the cooling fan stand also further makes sure heat is rapidly transported away..
  • [Desktop-quality power supply]: The M17 desktop mp3 player contains two power supplies – a battery power supply and a power supply powered by external DC power. The battery power supply allows you to use the M17 lossless mp3 player in situations where there is no access to a power outlet. Under DC power supply, voltage in the analog circuit is increased by 35% up to 11.5V compared to under battery power supply.
  • and the battery is kept healthy since it is not used in this mode..
  • [Desktop-grade gain]: Under battery power, there are 4 gain levels: low, medium, high, and headphone mode. When under DC mode, the enhanced over-ear headphone mode gain is unlocked, with a truly desktop level of amplification gain. In balanced output, gain can get as high as 16dB – allowing the M17 audio player to easily drive most headphones..
  • [A true smartphone-like experience]: Android 10 OS open to install 3rd party apps.
  • Bluetooth 5.0 with support for aptX Adaptive, supports u....
Check Stock

Performance Teknique ICBM-892 2 Channel Amplifier 1200W MAX

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

Sundown Audio Salt Series Monoblock Digital Class-D Amplifier (Salt-2 2000W Rms)

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Soundstream MR1.2000D Rubicon Nano 2000W Class D Monoblock Marine Amplifier

  • Rubicon Nano 2000W Class D Monoblock Marine amplifier.
  • High Efficiency Class D Full Range Amplifiers.
  • Hybrid Aluminum Alloy Heatsink for Optimum Dissipation.
  • 2-ohm Stereo & 4-ohm Bridged Class D Full Range.
  • MOSFET Power Supply w/ Audiophile Grade IRTM Transistors.
Check Stock

Orion Cobalt Monoblock Amplifier – Class D Amplifier 1000W RMS 2000W Max, Car Electronics Car Audio Stereo Subwoofer 1 Ohm Stable Bass Boost MOSFET Full Range Amplifier for Car Speakers Sub Amp

  • ...ntinuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively.
  • Low/High Level Inputs – The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Features – The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift.
  • Power – This Class D 2000 watt Amplifier has a power rating distribution as followed 2000 X 1 MAX @ 1 OHM. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
Check Stock

JacobsParts AFILTER-B 2-Channel RCA Stereo Ground Loop Isolator

  • 1100 W MAX Bridged Power @ 4 Ohm x 2 Channels.
  • Full-Range, Class A / B Topology, MOSFET Power Supply.
  • Low and High Level Inputs, Variable Filter, Variable Bass Boost.
Check Stock