ReviewsClassic Joystick Controllers

2 x Silicone Analog Joystick Thumbstcks Thumb Stick Grips Caps Cover for PS4 PS4 Pro Slim PS3 Xbox One Xbox 360 PS2 Nintendo Switch Pro Controller

  • Protect you joystick from dust and scratches..
  • Silicone thumb stick grip cap cover for PS2 / PS3 / PS4 / Xbox 360 / Xbox one / Wii Controllers.
  • Package include: 2 Pcs silicone controllers thumb stick.
  • Silicone Joystick Thumbsticks Grip Caps for Dualshock 4 PS4 Pro Slim Controller for XBox One X S.
Check Stock

ElecGear 4X Replacement Joystick (EL2 FU 10K) for PS4 / PS3 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module for Playstation

  • [EL2 FU 10K for PS4/PS3 Controller] – 4x replacement analog joystick was found in some PS4 DualShock 4 came with PlayStation 4 Pro, and some PS3 controllers also use this version. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10KΩ trimmer potentiometers in orange.
  • [Compatibility] – The 14 prongs were positioned as the same as ALPS edition. Technically, the whole unit is interchangeable with EL1 ALPS 10K used in PS4 controllers, and other brands like ‘Scuf’ and ‘Razer Raiju Ultimate’ with ALPS joysticks inside. However, the trim pot resistor alone is not interchangeable with ALPS edition.
  • [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting.
  • [When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no react....
Check Stock

8Pcs Analog Thumb Grip Stick Cover, Dualsense Wireless Controllers Game Remote Joystick Cap, Non-Slip Silicone Handle Protection Cover for PS5/PS4/Xbox one/360/Nintendo Switch PRO (Black Spider-Man)

  • Protect you joystick from dust and scratches..
  • Silicone thumb stick grip cap cover for PS2 / PS3 / PS4 / Xbox 360 / Xbox one / Wii Controllers.
  • Package include: 2 Pcs silicone controllers thumb stick.
  • Silicone Joystick Thumbsticks Grip Caps for Dualshock 4 PS4 Pro Slim Controller for XBox One X S.
Check Stock

Replacement Joystick for Nintendo 64 Controller

  • Joystick that replaces broken thumbpads in original N64 controllers.
  • Compatible with NTSC and PAL controllers.
  • Philips screwdriver needed for installation (Screwdriver sold separately)..
Check Stock

Redesigned Replacement Joystick for Nintendo 64 Controller Repair N64 Thumbstick Pad

  • Top-quality replacement Nintendo 64 part.
  • Redesigned to resemble Game Cube's joystick and durability.
  • Compatible with all original genuine Nintendo 64 controllers.
  • Compatible with both NTSC & PAL controllers.
Check Stock

JoFong 7 Pin Classic NES Controller for NES 8-Bit (1985 Version) Entertainment System Console, Plug and Play Wired Video Gamepad Joystick - 2 Pack, Note Not for NES Classic (2016)

  • 【Applicability and Precautions】: The third-party replacement controller, not the original NES 8-bit controller, is suitable for the 1985 version of the NES 8-bit entertainment system console controller, not compatible with NES Classic (2016). Before buying the game Gamepad Joystick, please check if it matches your console..
  • 【7-pin plug and length】: JoFong 7-pin plug controller handle joystick. The cable length is about 1.50M/4.9FT, which provides a comfortable distance during use, and the right size brings a better gaming experience..
  • 【Plug and Play】: Plug and play, no need to install drivers or patches. Play your favorite vintage games with a classic retro feel..
  • 【Upgrade handle】: Take full advantage of the upgraded version's 11 function input keys and smooth transmission function to take your game to the next level. With the TURBO button and the simple TURBO button, the buttons are more responsive, easier and more accurate to control the game. 2 wired game controllers allow you to enjoy gaming time with your friends at the same time..
  • 【Quality Service】: Our products provide 1 year warranty service. If you have any questions, please feel free to contact us, we will reply you within 24 hours..
Check Stock

Atari 7800 2600 Joysitck Controller Control Pad Commodore 64 Wood Grain

  • Compatible with other Atari joystick compatible consoles and computers where (B) and (A) are both fire button 1.
  • Custom designed brand new circuit boards - NOT a modified Nintendo controller.
  • More comfortable than the original OEM controllers and comes with 10 foot cord.
  • See my other controllers for Colecovision, MSX, Commodore, Sega and Amiga.
Check Stock

KIWITATA Classic N64 Controller, kiwitatá Retro N64 Wired Remote Game Pad Joystick Controller Compatible N64 System Video Console Grey

  • ...omputer,if you want to use it on Switch, you need to self-prepare an N64 adapter for switch.
  • Tight and accurate analog control, the controller features 10 function buttons (including Left and Right shoulder functions and Z-trigger). Based on ergonomic and designed to fit your hands nicely, easier to grip than other controllers..
  • Rumble Pak & Memory Card Feature: Compatible with most of game memory cards. you can use a memory card and transfer to an SD card..
  • The cord is approx. 1.7 meters (6ft), including a push-on connector and easy to use. Use a N64 Controller Extension Cord Cables, you can play across the room. The joystick is removeable and replaceable, please contact the seller support if you need a replacement of the new joystick..
  • Third party controller, not original N64 controller, not USB version controller.The best gift for your families or friends, that will bring back those childhood memories when you are playing classic games. 60 days no reason to return and One Year worry-free warranty service..
Check Stock

2 Atari Keyboard Controllers for 2600 7800 Cx50

  • Designed for Atari 7800 (2) button games and compatible with Atari 2600 (1) button games.
  • Compatible with other Atari joystick compatible consoles and computers where (B) and (A) are both fire button 1.
  • Custom designed brand new circuit boards - NOT a modified Nintendo controller.
  • More comfortable than the original OEM controllers and comes with 10 foot cord.
  • See my other controllers for Colecovision, MSX, Commodore, Sega and Amiga.
Check Stock

N64 Controller Extension Cable, N64 Extension Cord Compatible with Nintendo 64 N64 Controller Gamepad - 6Ft / 4Pack

  • ♥NOTE - The controllers are third party controller, not original N64 controller. But it works as well as the original..
  • ♥Upgraded Joystick - Unlike the original N64 controller, using a new technology design that gives more precise and more convenient operation experience. Furthermore made by stronger material to thicken it, it is not easy to be broken..
  • ♥Ergonomic Design - Classic N64 controller, It has ten function control buttons and is distributed in an "M" shape. With improved ergonomic design,designed to please your hand with a comfortable feeling when holding it..
  • ♥Enjoy Games - You can play most of N64 games very well, such as Mario Party game, Pokémon Snap, Smash Bros, Kirby, Glover or any other N64 games in the 90’s, the cord is approx. 6ft, perfect alternative for kids to play with..
  • ♥LIFETIME WARRANTY: If you have any concerns with the N64 controllers after-sale, just contact us! We will ALWAYS replace a faulty product or refund your purchase within 30 days..
Check Stock

Avisiri 2 Player Arcade Joystick DIY Kit 2 x 8 Way Joystick + 20x Chrome LED Arcade Buttons Game Kit for PC Raspberry Pi Video Games (Red-Blue Kits)

  • Package include: 1pcs Black JLF-TP-8YT Ball Handle Joystick and 8pcs black sanwa OBSF-30 push button. (If need other colors please send us message.).
  • Perfect for XBOX360/PS3/PS2 Controllers and Arcade machine which demand the highest quality parts..
  • High quality Japan-made joystick, Suitable for control panels made of steel or plastic to a max. of 5mm thick.
  • Original Japan-made button. Snap-in installation, easy to replace existing parts and use.Each Sanwa button contains a non-clicking micro switch..
  • Ideal to replace arcade / home console joystick for fighting style games and any joystick heavy games.
Check Stock