ReviewsClaw Puller

EEIEER Weed Puller Adjustable, 40’’ Stand-up Manual Weeders with 4 Claws, Efficient Weeding Tool for Lawn Yard Garden Patio

【Efficient Weeding Helper in Yard】The weeder puller allows you to remove weeds when standing, saving you from bending knees and back pain. With the weeding tool, you don't need to pull weeds by your hands or use harsh chemicals to harm your soil. Weeding is so easy with our stand-up weeder！.
【Upgraded 4-Claws Design】EEIEER standing weed puller is designed with 2 long stainless steel claws and 2 sharp serrated prongs, the 4 special claws will firmly grasp various weeds without breaking the roots, making it easier to remove weeds permanently no matter what kind of soil they grow on..
【Considerate Adjustable Weed Puller】Our 39.4‘’（1m）stand up weeding tool is suitable for most people's height, and the handle component are adjustable from 0~90°. You can choose a most comfortable angle to work. And the adjustable folding foot plate is also suitable for the slope, which is labor saving and time-saving..
【Durable & Practical】The weed removal tool is made of premium material and treated with black coat, which is durable and anti-rust. The plastic handle on the head is lighter and also provides a more comfortable feel. This weed puller combines durability and practicality, which can assure minimum fatigue..

Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
These tools make the job simple and prevent damage to your bearings when pulling.
Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
For removal only, not intended for installation.
FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
Sizes permanently laser-etched on tool for easy identification.
Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.

Check Stock

STARWORK 20 oz Hammer with Comfort Grip, Nailing Hammer Steel Head Steel Handle, AntiVibe, Rip Claw

【Features】20 oz bi-color, black paint finished one-piece claw hammer for a wide variety of uses. Rip claw head for prying and pulling nails and more, flat hammerhead delivers powerful strikes..
【Ergonomic Grip】Vibration reduction TPR ergonomic grip for user comfort and high performance..
【Premium Material】Forged from one piece steel for strength and durability..
【Nail Puller】Magnetic nail starter for rapid nail driving, perfect for one-hand operation..
【Easy to Use】Construction, home improvement, general repairs and maintenance, woodworking, art hanging, and more..

Check Stock

Parts-Diyer Dent Puller w/Slide Hammer Set Replacement for Automotive Auto Body Truck Repair Tool Heavy Duty

EASY DENT FIX: The paintless dent repair kit quickly fixes dents on most vehicles without needing specialty tools.
Innovative slide hammer with dent removal kit makes dent pulling easy and effective.
HELPFUL ATTACHMENTS: The dent puller paintless dent repair set comes with versatile attachments to help pull dents in hard-to-reach places.
Car dent removal tool set allows you to pull dents on doors, bumpers, hoods, and more.
HIGH-QUALITY MATERIAL: The dent repair puller set is made from high-quality steel that resists rust and corrosion.
Materials in universal dent remover tool set won’t bend or break.
Slide hammer dent puller set is made for heavy-duty use.
TRANSPORTABLE: Paintless dent repair tools come in a sturdy, blow mold case for added protection and transportability.
Dent remover for cars set is perfect for the mechanic or serious DIYer.
INCLUDED: The set comes with 12 lb. slide hammer, slide hammer shaft, slide hammer handle, slide hammer adapter, deep hook, short hook, door edge tool, claw, straight driver, hook and chain, sheet metal screw and holder, and nose piece with screw.

Check Stock

Chogem Garden Hand Weeder, Dandelion Digger Weeding Removal Tool Ergonomic Handle Weed Puller with Hanging String for Gardening Lawn Farmland Yard (Yellow)

3.14” Longer Claws: Unlike weed pullers with 2.75” claws, upgraded 3.14” longer claws of this weed puller is perfect for picking out entire longer taproot,fibrous root and grass roots without breaking them off.
No Snap and No Slip: Steel 4-claw design works for larger, thinner, skinny weeds and smallish roots without snapping or slipping. Ideal weeding tool for getting rid of unwanted dandelion, wild onion,crabgrass,creepy charlie,thistles,young mulberry trees etc..
Unbreakable Steel Construction: Weed puller with unbreakable steel head and handle works on all soil types especially after a good rain or watering as well as last a lifetime. NOT for hard soil.
11.8-71” Adjustable Steel Handle: You can customize the length of the handle by adding more poles. Longer durable handle of this standing up weeder picker fits people of different height, saving their back and yard without crawling on their hands and knees.
Warranty: Each stand up weeding tool comes with 12-Month warranty, any issue when receiving or using this weeder puller, please message us for replacements or refunds.

Check Stock

Weed Puller and Patio Paver Weeding Tool Set - Two Classic, Heavy Duty, Stainless Steel Weeding Tools with Beautiful Wooden Handles - by Truly Garden

3.14” Longer Claws: Unlike weed pullers with 2.75” claws, upgraded 3.14” longer claws of this weed puller is perfect for picking out entire longer taproot,fibrous root and grass roots without breaking them off.
No Snap and No Slip: Steel 4-claw design works for larger, thinner, skinny weeds and smallish roots without snapping or slipping. Ideal weeding tool for getting rid of unwanted dandelion, wild onion,crabgrass,creepy charlie,thistles,young mulberry trees etc..
Unbreakable Steel Construction: Weed puller with unbreakable steel head and handle works on all soil types especially after a good rain or watering as well as last a lifetime. NOT for hard soil.
11.8-71” Adjustable Steel Handle: You can customize the length of the handle by adding more poles. Longer durable handle of this standing up weeder picker fits people of different height, saving their back and yard without crawling on their hands and knees.
Warranty: Each stand up weeding tool comes with 12-Month warranty, any issue when receiving or using this weeder puller, please message us for replacements or refunds.

Check Stock

Trim Puller, Huazu Tile Removal Tool Heavy Duty Pry Bar Molding Removal Tool for Removing Wood Floor, Baseboard, Tiles, Nail Pulling and More, Built In Nail Puller and Socket Wrench

WIDE PRY BLADE: The trim puller has a wider pry blade compared with traditional tools, and has a 15 degree wedged center for good leverage, which can improve the removal efficiency and disperse the force to avoid damage to the wall, trim and bottom plate..
DESIGN HIGHLIGHT: The sharpening of the cutting edge makes it easier to be embedded in the gap, reducing the damage to the wall and veneer caused by repeated use. The trim removal tool can also be used as a scraper. The nail puller, bottle opener and socket wrench make the trimmer adapted to its work better..
DURABLE AND HIGH QUALITY MATERIAL: The trim puller tool is made of durable stainless steel, with excellent corrosion resistance and wear resistance. It will hold up well to repeated whacking and not easy to deform or crack under long-term heavy blows..
MULTI-FUNCTION: The heavy duty pry bar is very suitable for disassembling baseboards and molds. It is an ideal choice for disassembling baseboards, door casings, bottom plates, tiles, decorative panels quickly and safely. It can complete all the work of a wrecking bar, flat pry bar and claw..

Check Stock

Crescent - 24\ Adjustable Pry Bar (DB24-07)

Adjustable jaws slide and clamp to fit onto objects for straightening and prying..
Large claw on head adjusts for best leverage when pulling nails..

Check Stock

Fence Fencing Pliers 10-1/2-Inch Multi Purpose Heavy Duty Tool MIT Brand 93566

Drop Forged Heat Treated Steel Construction.
Cushioned Full-Length Non-Slip Handle Grips.
Seven Pliers in one: Two Wire Splicing Channels, Milled Hammer Face, Staple Puller Claw, Twin Wire Cutters, and a Gripping Jaw.

Check Stock

Wailicop Garden Hand Weeder Grip Weeding Scratch - Stainless Steel Manual Weed Puller Bend-Proof Gardening Tool Remove Dandelions Thistles and Other Weeds

ERGONIMIC DESIGN &WEED THE GARDEN SAVE YOUR BACK：Weed Puller Constantly bending over to pull weeds can leave your back in agony. Save time and your....
POINTED 3 CLAW DESIGN SUITABLE FOR DIFFERENT SOIL TYPES: Stand Up Weeder with Three 2.75” Steel teeth are long enough to efficiently remove grass....
ALL-IN-ONE TOOL： Why invest in half a dozen different tools for gardening when you can tackle them all with the step and twist garden/lawn weeder?....
HIGH STRENGTH FOOT PEDAL DESIGN：Striking the perfect balance between usability and durability, this manual weed removing tool is built with a....
[100% CUSTOMER SATISFACTION, 3 Years Service] If there is anything you are not satisfied, or any problem with using our weed puller, If the stand up....

Check Stock

Zenith 10" Self-Prying Bar

...ned with a lighter weight and compact size, making it perfect for working in cramped spaces where there might not be enough room for a larger tool.
THE ULTIMATE SALVAGE, WRECKING AND DEMOLITION MULI-TOOL! The Self Prying Pry Bar functions as a best version of the Trim Puller as it does all the work of a flat pry bar, wrecking bar or claw and is great for smaller DIY projects by safely removing baseboards, crown molding, door casings, chair railing, decorative panel and even nailed or glued countertop.
LIFT IT, SEPARATE IT, DESTROY IT OR SAVE IT FAST! The unique self-prying action utilizes the strength of the closed center wedge to easily separate anything with reduced effort to allow for PRECISION SALVAGE when high value materials are involved.
INTEGRATED NAIL PULLER: The Pry Bar has 2 integrated precision nail removers, one located in the 90 angled face and the other in the tail making it Ideal for repair and remodel projects.
COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This pry bar is capped off with an EDPM handle that feels comfortable in the hand while offering exceptional....

Check Stock