ReviewsClearance Gauge

SYCOOVEN Bicycle Derailleur Hanger Alignment Gauge Ranging Tool Portable for MTB and Road Bike Repair

✔✔Durable Material: The bike ranging tool is made of Aluminum Alloy, Stainless Steel and features a high temperature resistance. Strong and durable, lightweight..
✔✔Application: The bicycle derailleur hanger alignment gauge is used to correct the rear lifting lug and to check the transmission shifting problem simply and accurately. Especially after positioning the shifting system, the result can be known immediately..
✔✔Design: The bicycle alignment tool can 360 degree rotation, telescopic measurement, free to adjust the length, more convenient and quick..
✔✔More Accurate: Improved clearance and reach to work on more frame/derailleur hanger combos.Including low clearance thru axle derailleur hangers. Updated with tighter tolerances for improved accuracy..
✔✔Fit: It Adjusts to fit 26/27.5/29/700C wheels. Suitable for most of bicycles..

Cut an 85mm (3 3/8″) hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge..
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable..
It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it..
It shows current speed and odometer(cannot be reset), no trip meter. If you also need trip meter, pls. search for ASIN B07KPHDFDB, B07KPHC1ML or B07KPG7XT3.
9-32VDC(12VDC/24VDC) Working Voltage, Red Backlight, 1 year Warranty.

Our trailer light with box made by 14 gauge heavy duty steel.Built to last and withstand rugged environments..
Come with 2 pack 6" oval red LED marker lights, and 2 pack 2" round led trailer clearance lights.3/4 hole on side for trailer light wires..
Angled side clearance lights mount design for better side light visualization from both side and rear..
Tail Light Guard Box for Trailers, Utility Trucks etc. and Can be mounted to the side, top or bottom of your trailer..

Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge..
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable..
It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it..
It shows current speed and odometer(cannot be reset), no trip meter. If you also need trip meter, pls. search for ASIN B07KPHDFDB, B07KPHC1ML or B07KPG7XT3.
Red Backlight, 12VDC/24VDC Working Voltage, 1 year Warranty, 100% waterproof and anti-fogging protection.

Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole and screw down..
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
It shows Current Speed, TRIP/COG(choose one), ODO(cannot be reset). If you need other color faceplate, pls. search for ASIN B07DXNGL24 and B07DXYSJX9.
Backlight: Red Green Blue White Yellow Orange Purple Light Green or automatic.
9-32VDC(12VDC/24VDC) Working Voltage,1 year Warranty, 100% Waterproof and anti-fogging protection.

【High efficiency performance】: It is equipped with 2-1/2" input pressure gauge for proper leakage test setup and accurate results. Available with....
【Professional leakage detect function】: This cylinder leak tester checks the amount of leakage in an engine cylinder and helps determine the....
【Universal application】: Ideal for testing trucks and car models where clearance is minimal. Suitable for any petrol engine with 10, 12 or 14mm....
【Complete set】: This set of leakage tester includes pressure gauge, cylinder leakage gauge, spark plug adapter, quick connect/disconnect hose and....
【Local shipping】This item will be shipped from USA warehouse, and the delivery time only needs about 4-7 days.

Verify guide bar length to ensure proper fitment.
Skip sequence design provides greater clearance for better chip flow - the larger the wood being cut and the longer the bar used, the more important good chip flow becomes.
Lubritec keeps your saw chain and guide Bar Oiled, for less friction and longer life.
Expanded Top-Plate filing indicators and depth gauge filing idicators area make accurate sharpening easier. Reshaped cutter powers through timber with speed, efficiency and precision.
Blued Cutters deliver high-quality protection against corrosion and the exclusive OCS-01 steel delivers greater durability.

Innovative wire stripper with self-adjusting mechanism is ideal for copper and aluminum cables from 10-24 AWG.
Specially designed and precisely machined teeth grabs, holds, pulls and removes outer jacket in a simple one-handed motion..
Thumb wheel micro-adjusts jaw tension and clearance for perfect stripping on smaller gauge wires beyond 20 AWG.
Adjustable gauge/stopper controls the length of core wire from 1/4 to 3/4”.
High-frequency heat treated blades makes clean cuts on wires from 10-24 AWG.
Built-in crimper crimps 10-22 AWG insulated, 4-22 AWG non-insulated and 7-8 mm auto ignited terminals.
8 Inch spring-loaded, flat-sided handle provides maximum comfort and leverage.

For 12 Gauge Remington 870 and 870DM Shotguns, Features a 3. 5" and Under Chamber Clearance.
Removable 4-Capacity Shot Shell Carrier Included.
Scalloped Full Length Pica tinny Top Rail with Access to Bead Sight Left Intact.
Durable 6061-T6 Matte Black Anodized Aluminum Construction.

For 12 Gauge Mossberg 590 and 500 Shotguns. Not Compatible with Mag-Fed 590M, Features a 3.5” and Under Chamber Clearance.
Removable 4-Capacity Shot Shell Carrier Included.
Scalloped FullLength Picatinny Top Rail with Access to Bead Sight Left Intact.
Durable 6061-T6 Matte Black Anodized Aluminum Construction.