ReviewsClock Movement Kit

12888 High Torque Quartz Clock Movement Replacement Parts with 350 mm / 13.78 Inch Long Spade Hands

  • Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Center of hole hand size: hour hand is approx. 174 mm (6.85 inch).
  • Minute hand is approx. 350 mm (13.78 inch).
  • Second caps is approx. 7 mm (0.28 inch)..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

High Torque I Shaft Hands Quartz DIY Wall Clock Movement Mechanism with 9.1 Inch Long Spade Hand Battery Operated Repair Parts Replacement, 1/2 in Max Dial Thickness, 9/10 in Total Length

  • ✔️ High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ✔️Accurate time-keepingmotor:Size- total shaft length is 23 mm (9/ 10 inches), thread length is 15.4mm (3/ 5 inches).
  • suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches)thickness clock panel.
  • Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • ✔️Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long.
  • The minute hand is about 230 mm/ 9.1 inches in length..
  • ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements..
  • ✔️ Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, a....
Check Stock

High Torque I Shaft Hands Quartz DIY Wall Clock Movement Mechanism with 9.1 Inch Long Spade Hand Battery Operated Repair Parts Replacement, 3/10 in Max Dial Thickness, 4/5 in Total Length

  • ✔️ High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ✔️Accurate time-keeping motor:Size-total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inches).
  • suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel.
  • Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • ✔️Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long.
  • The minute hand is about 230 mm/ 9.1 inches in length..
  • ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements..
  • ✔️ Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and....
Check Stock

2 Pieces Quartz Clock Movement Mechanisms Non Ticking Clock Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement (13 mm)

  • Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits.
  • There are various styles to choose which is very suitable for different styles of clock frames.
  • Size: the total shaft length is approx. 13 mm/ 0.5 inch, and the thread length is approx. 6 mm/ 0.24 inch.
  • The clock movement mechanism are suitable for 1 - 3 mm/ 0.04 - 0.12 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter, when you install this clock movement kit, please check the sizes.
  • Quality material: the movement is made of ABS material, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant, sturdy for a long time to use, providing you with nice use and decorative effect.
  • Clock design: the design of the clock hands are simple and stylish which have a various styles.
  • The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment.
  • Widely applicable: these clock repair replacement parts are suitable for cross-stitch, 3 dimensional embroidery, craft clocks, frame-less wall clocks, especially for DIY quartz wall clock to replace for using.
Check Stock

WXLAA Quartz Clock Movement with Hands for Mechanism Clock Repair Replacement Noctilucence Shaft Length 12mm (9/20 Inch) Thread Length 5mm(1/5 Inch)#2

  • 【COMPLETE KIT】:High torque shaft clock with metal hook,perfect for repairing, replacing or making a clock,applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.
  • 【CLOCK MECHANISM SIZE】 : total shaft length is approx. 12 mm (9/20" inches), thread length is 5 mm (1/5" inches), suitable for 1- 2mm (1/ 25 - 2/25 inches) thickness clock panel.
  • 【DECORATIVE CLOCK HANDS】: we offer a variety of different options, perfect for your clock creations.
  • get to pick out the style and length of the hands that look best with your clock at no additional charge,making your own customized clock.
  • 【ACCURATE TIME-KEEPING】: high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • equipped with sweeping motion, no ticking.
  • powered by a AA battery (not included package).
  • 【EASY TO INSTALL】: when you install this clock movement kit, please keep the hour hand and minute hand parallel,We offers high quality service within 24 hours, so please feel free to contact US，You will receive --1*Clock movement，1*Second hand，1*Minute hand，1*Hour hand，1*Brass washer，1*Brass nut.
Check Stock

TIKROUND Youngtown 12888 High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Gold 1 Set)

  • Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long.
  • The minute hand is about 305 mm/ 12 inches in length..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

7 Pcs Clock Movement Mechanism Clock Hands High Torque Long Shaft Clock Movement Replacement with 5 Different Pairs of Hands DIY Clock Repair Parts Replacement

  • Compatible Mechanism: Good for repairing, replacing or making a clock by yourself. Repair Hands Clock Motor movement can match to diverse clocks,such....
  • Decorative Clock Hands: Movement Hands Clock Motor suit for DIY clock , other clock creations.
  • get to pick out the hands that look best with your....
  • Total Shaft Length: 13 mm ( 0.51 inches), thread length: 6 mm (0.24 inches), suitable for 1-3 mm (0.04 - 0.12 inches) thickness clock panel..
  • Package included:1 x Quartz clock movement+1 x Second close nut+1 x Minute hand+1 x Hour hand+1 X Plastic washer+1 X Brass washer+1 X Brass nut.
  • Wide Application: Quartz Repair Mechanism Kit fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially....
Check Stock

ABONG Crossingham Wooden Gear Wall Clock Kit Pendulum Wall Clock Kit Mechanical Wooden Clock Model Wooden Clock Puzzle DIY Wood Clock Vintage Clock Wood Wall Décor Working Gear Clock

  • ...re a working wood clock, while keeping all the features of a traditional rotating gear clock..
  • This laser cut model kit features 99 Precision laser cut parts, carbon fiber axles for high strength, accuracy, and low friction, alignment pins, and high strength pendulum cord..
  • Make your own clock with a mechanical clock movement that is driven by counterweight and keeps time with a pendulum. The result is a wooden wall clock with a 12 hour run time and an easy rewind mechanism. It is accurate to within minutes per day and includes an easy time set feature..
  • The genuine moving gear wall clock kit makes for attractive wood wall décor. The finished DIY clock kit has a steampunk clock look. This pendulum clock is one of several mechanical clock kits for do it yourself woodworkers that we manufacture!.
  • This vintage clock kit includes a full dial train with accurate hour and minute hands. Build a wood wall clock kit that includes all the parts instead of starting from wooden gear clock plans. This weight driven clock is the best wood clock kit to build if you want to build a DIY clock kit with numbers for the first time..
  • This model kit for adults is made from a North American manufactured sustainable wood product (Fibrex). Model kits using this material accept g....
Check Stock

RoWood 3D Puzzles for Adults, Wooden Owl Clock Mechnical Gear Model Kits Gift for Adults & Teens (161 PCS)

  • UNIQUE MODEL KIT: This owl clock mechanical gears wooden model kit is a 3D wood puzzle and the final product is a real working clock, pretty cool. Bought to give as a puzzle, ended up on the shelf for a clock. Win-Win..
  • FUNCTIONAL & STYLISH: Super attractive clock, a real clock driven by accurate quartz battery movement, the clock keeps accurate time and silent. Request 1x AA battery..
  • EASY SELF-ASSEMBLY: The instructions of this DIY owl clock 3d puzzle craft kit are in English with pictures to aid in the construction, everything in the 3d wooden owl clock kit is clearly marked and labeled so that assembly is as enjoyable as possible. If you meet any problems during the assembly, pls feel free to let us know..
  • FUN MODEL TO BUILD: Challenging and fun enough for adults or teens but not too complicated, all the pieces of the geargits clock model fit well and just a bit of critical thinking needed..
  • PERFECT GIFT: Create unforgettable times of working together on this mechanical geargits owl clock 3d wooden puzzle model kit between you and your kids. A super awesome bond, great family ties. Wonderful gifts for Adults, Teens, family, friends or yourself at any occasions like birthday or anniversary..
Check Stock

5 Pieces Clock Movement Mechanism Clock Hands Quartz High Torque Long Shaft Clock Movement Replacement with 5 Pairs of Hands Clock Repair Parts Replacement Clock Movement Kits (20 mm/ 0.8 Inches)

  • DIY clock repair kit: you will get 5 pieces of high torque long shaft clock movements with 5 different pairs of clock hands, these replacement parts suit well to different styles of clock frame, which are good for repairing, replacing or making a clock by yourself.
  • Size details: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches.
  • Jump second movement is suitable for 9 - 13 mm/ 0.35 - 0.51 inches thickness of clock panel.
  • Please note that small parts are included, keep away from children under 3 years old.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability.
  • Equipped with sweeping motion and no ticking, it will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and they are specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this clock kit comes with 5 pairs of clock hands in different styles and length for your options, so it is great for clock creations and repairs while providing a decorative effect.
Check Stock

2 Pair Hands Quartz Clock Movement DIY Wall Clock Movement Mechanism Clock Repair Parts Replacement (Shaft Length 9/10 Inch/ 23 mm, Color Set 1)

  • Package and install: come with specially designed with blister cardboard box and instructions, convenient to carry.
  • When you install this clock movement kit, please keep the hour hand and minute hand parallel.
  • Clock mechanism size: total shaft length is 23 mm (9/ 10 inches), thread length is 15.4 mm (3/ 5 inches).
  • Jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel.
  • Clock hands kit: package includes 2 pieces of minute hands and 2 pieces of hour hands, 1 second hand and 1 second caps, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame.
  • Hole center to the tip hand size: the hour hands are approx. 80 mm/ 3.1 inch and 59 mm/ 2.3 inches respectively, minute hands are approx. 110 mm/ 4.3 inches and 86 mm/ 3.4 inches, the second hand is approx. 100 mm/ 3.9 inches, second caps is approx. 7 mm/ 0.28 inches.
  • Range of use: suitable for repairing, replacing or making a clock.
  • Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..
Check Stock