ReviewsClutch Salve Cylinder

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
  • Easier to use and less messy than an inconvenient hand pump.
  • EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

5Pcs Banjo Bolt, M10x1.25 Banjo Bolt Hard Iron Motorcycle Banjo Screws for Brake Caliper Master Cylinder

  • 【Non-slip Design】-- Comes with 5pcs Brake Banjo Bolts & 10 Washer. Neat threads, not easy to slip, safer to use.
  • 【Durable & Sturdy】-- Made of high quality iron material, our banjo bolt washer is durable and sturdy, providing you with long use term.
  • 【For Most Motorcycles】-- Our m10x1.25 banjo bolt fits for most motorcycles brake caliper, brake clutch master/slave cylinder and radiates energy hose.
  • 【Specifications】-- Condition: 100% brand new, Material: iron, Color: army green, Size: shown as picture, Quantity: 5pcs bolts + 10 washers, Package Weight: approx.100g, Fitment: for brake caliper, brake clutch master/slave cylinder and radiates energy hose.
  • 【2 Sizes】-- 2 standard size banjo fitting M10 x 1.25mm and M10 x 1.0mm for your option.
Check Stock

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

  • 【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
  • 【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
  • 【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
  • aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
  • crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
  • lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....
Check Stock

CNC Aluminum 7/8' (22mm) Universal Motorcycle Dual Hydraulic Brake Clutch Master Cylinder Reservoir Lever Fit 50cc-300cc Sport Bike Street Bike Scooter (1 Pair, Red)

  • ★Universal Applications - Fit on most brand 50cc. to 300 cc. Sport bike/Street bike/Scooter with 7/8" (22mm) Standard Handle bars..
  • ★High Quality - Levers are made of CNN 6061 Aluminum Alloy and anodized in the same color as the cap of the brake fluid reservoir, two-finger short levers with 6-position adjusters..
  • ★Fitment - Suits for Honda, for Kawasaki, for Yamaha, for Suzuki, For Ducati etc..
  • ★Features - 12.7mm piston bore size universal standard 7/8" (22mm) dual hydraulic front brake master cylinder & clutch perch with adjustable levers and fluid reservoir full kit..
  • ★You'll Get - 1 Pair Of Hydraulic Brake Master Cylinder & Clutch Lever.
Check Stock

AMS Automotive Clutch Slave Cylinder S0523

  • Direct replacement - this clutch slave cylinder is built to match the original clutch slave in specific vehicles.
  • Precise design - reverse-engineered from original equipment to fit seamlessly and function reliably.
  • Durable materials - includes high-grade rubber components for compatibility with standard brake fluid.
  • Trustworthy value - backed by team of engineers and quality control experts in the United States.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

X-PRO 150cc Short Case Air cooled w/Automatic Transmission Electric Start GY6 Scooter Engine

  • Engine Type: Single Cylinder, 4-Stroke, 2-Valve Short Case 150cc GY6 CVT Auto Scooter Engine Use 743-20-30 Belt, Air cooled, CVT, 4 Stroke, auto clutch, electric start..
  • GY6 150cc Engine, Automatic Transmission, electric start..
  • This engine assembly comes with Intake Pipe, Drive Sprocket, Sprocket cover & Spark Plug, but doesn't come with Carburetor, Battery, CDI, Voltage Regulator, Ignition Coil etc. Best of all, it comes with High quality aluminum cylinder head and iron cylinder body..
Check Stock

CDHPOWER PK80 Motor Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already.
  • better adjusting Clutch a little before riding.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

ProVision PV2 Flexible Fiberscope / Inspection Scope w/ 36 In Non-Obedient Cable

  • 【Scope of application】Cylinder honing tools are suitable for degreasing engine cylinders with diameters from 3/4 in to 2‑1 / 2 in and 1‑1 / 4 in to 3‑1 / 2 in. The manufacturer's part number is 88233.
  • 【Excellent performance】This tool can be used to remove carbon deposits and hot glaze in the cylinder bore. This special tool can be used for small-bore cylinders, such as motorcycles, brakes, and clutch cylinders, ideal for removing rust deposits in old renovations..
  • 【High quality】The cylinder honing three jaws are made of high-quality iron materials, high strength, high hardness, rust and resistance, not easy to wear and not easy to age, and are made of special technology to enhance their stability and performance to ensure excellent durability and long service life ..
  • 【Ergonomics design】The engine cylinder grindstone adopts ergonomics design, which can be comfortably held, effortless to use, easy to operate, labor-saving, and high-efficiency, bringing you a lot of convenience. Flexible shaft, easy to use, and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole..
  • 【Use steps】Spray lubricant on the stone or cylinder hole. Set the whetstone on the drill bit, insert the engine whets....
Check Stock

DONSP1986 PK80 Motor Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc.
  • better adjusting Clutch a little before riding.
  • PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set with AF80 connecting rod.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

Lawn Mower Parts A056000452 / A056000450 Shoe Assy Clutch for Echo Fits T282 B450 B530 + (Free Two E-Books)

  • Fits the Following: · B450-->Clutch, Piston.
  • If you have any questions about this item or model, serial number, please ask question to us @@We strive to provide the best service. We value our customers. Also we will send you an ebooks within 48 hours after the purchase. First еbook - Professional Lawn Care For Your Home…By You and Second ebook - Mowing and Trimming Safety..
Check Stock

Aromi Solid Perfume | Earthy, Fruity Fragrance - Vegan & Cruelty-free, Portable, Affordable Women’s Gift Idea, 0.5 oz, (Hipster)

  • Hipster solid perfume is an earthy, fruity blend of patchouli, vanilla, caramel, peach, apricot, passion fruit, mandarin, honey, & bergamot.
  • Multi-purpose - each solid perfume is designed to work as a cuticle cream, hand salve, skin moisturizer, or hair balm to smooth flyaway hairs..
  • Travel-friendly & portable perfume - Aromi solid perfumes can go in a purse, clutch, backpack, tote, or carry on suitcase..
  • Vegan and Cruelty-free Solid Perfume - no animal ingredients or animal testing!.
Check Stock