ReviewsClutch Slave Cylinder Kit

269 Motorsports Tick Performance Adjustable Clutch Master Cylinder Kit for 97-04 Corvette C5 & Z06 TAMCKYB

  • Tick Performance Adjustable Clutch Master Cylinder Kit for 97-04 Corvette C5 and Z06.
  • Custom Tilton Adjustable Master Cylinder.
  • Unrestricted and Heat-Wrapped Clutch Hydraulic Line.
  • Includes All Necessary Hardware and Easy to Understand Instructions.
  • Flows More Fluid Than Any Other Master Cylinder Available.
Check Stock

Raybestos BH380406 Professional Grade Hydraulic Brake Hose

  • Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
  • This hose meets federal standards to ensure performance and safety, while providing longer hose life.
  • It utilizes premium fittings to ensure a good hydraulic seal.
  • Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
Check Stock

Raybestos BH381116 Professional Grade Hydraulic Brake Hose

  • Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
  • This hose meets federal standards to ensure performance and safety, while providing longer hose life.
  • It utilizes premium fittings to ensure a good hydraulic seal.
  • Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
Check Stock

MAS CC649014 Clutch Master and Slave Cylinder Assembly Compatible with Select Ford Models

  • Direct replacement - reverse-engineered from original clutch master and slave cylinder on specific vehicles.
  • Durable components - contains high-quality EPDM rubber components for compatibility with brake fluid.
  • Performance assured - pre-filled and pre-bled fluid line ensures immediate performance.
  • Reliable design - engineered in North America and backed by long history of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

1990-1995 GM NV4500 5 Spd Rebuild Kit, BK308WS

  • Kit Includes High Quality Bearings, Seals, Gaskets, & Synchronizer Rings.
  • Compatible with 1990-1995 Chevy w/ External Clutch Slave.
  • Whatever It Takes Transmissions products are engineered to meet or exceed OEM specifications and are manufactured using high quality components..
  • Whatever It Takes Transmission Parts is an Industry Leader in Transmission Parts Delivering Superior Service and High-Quality Products..
Check Stock

DONSP1986 PK80 Motor Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc.
  • better adjusting Clutch a little before riding.
  • PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set with AF80 connecting rod.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

Thorstone Brake Bleeder Kit with Hand Held Vacuum Pump Tester | 16pcs Brake Clutch Bleeder Tool with Adapters for Car Kitchen Uses | One-Man Brake Bleeding System Apply to Bike, Motorcycle, Car, Truck

  • 2-IN-1 TOOL SET - This one-man manual brake bleeding kit enables you to bleed brakes, test vacuum readings through the pressure gauge, and pump out oil, power steering fluids, and many other fluid types. Can be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. To flush old brake fluid and air, and guide the new fluid to fill the brake system..
  • VACUUM SYSTEM TESTER - A manual pump with vacuum gauge could be widely used in testing vehicle vacuum system/household kitchen vacuum sealer to seal food jar, ball jar and vacuum bag. Test and diagnose a wide variety of parts and common systems on your bike motorcycle truck pickup or any other vehicle. Equipped with vacuum gauge, convenient readout of pressure, pressure range: 0-30inHg, 0-760mmHg..
  • HIGH DURABILITY & SEALING - Pressure-proof stalinite which is stronger than normal material. The metal parts are made of alloy and copper, with strong corrosion-proof performance. Our tubes are made from premium PVC for high resilience, heat resistance, and maximum sealing performance. Brake bleeding of each wheel takes less than 5 minutes with great ease..
  • COMPLETE ACCESSORIES - Include vacuum pump with gauge, 4.5oz reservoir jar, 3 transparent hoses, 6 adapters, 2 connectors and a blow mold ca....
Check Stock

CDHPOWER PK80 Motor Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already.
  • better adjusting Clutch a little before riding.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
  • Easier to use and less messy than an inconvenient hand pump.
  • EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

Schaeffler LuK LMC354 Clutch Master Cylinder OEM Clutch Release Replacement Parts

  • OEM Clutch Release Repair Kits: Our clutch sets suit a huge variety of vehicles, including Cars, Trucks, SUVs, Vans, Motorcycles, & Scooters, & ATVs &....
  • Replacement Clutch Cylinder: As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. Each....
  • Clutch Master Cylinder: As an important component of modern clutch systems, the release system, the connection between pedal and clutch, has a....
  • LuK Hydraulic Components: Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. Each....
  • Size and Other Details: These clutch replacement parts can be used for various models of Car, Truck, SUV & Van, Motorcycles & Scooters as well as ATVs....
Check Stock