ReviewsCluth Brake Valve

Freedom and Drain Cleaner

General's water jets are ideal for clearing soft stoppages and ice from clogged drain lines.
A removable 150 ft. Capacity hose Reel with Reel brake and swivel is mounted on a heavy-duty Frame with two 8 in. Semi-pneumatic Tires. Complete with tool box.
Standard safety features include a thermal relief valve to protect the pump from heat damage, along with a back flow check valve and inlet filter. An optional spray wand is available.

Features a 2.3 gallon (8.8 liter) capacity air operated fluid evacuator for large jobs.
Automatic shut-off valve prevents overfilling.
Can be used to extract a wide-range of fluid types from transmission fluid, coolant, brake fluid, gear to engine oil.
Reservoir is constructed of durable polyethylene and will not rust or corrode.
Kit comes with 5 feet of flexible hose, dipstick tubes and a universal brake-bleeding adapter.

Brand New Suspension and Brake Kit, with 2" Drop Spindles, for 1968-1972 GM A-Body Cars (Part # GMA6872X-K73) 003e This specific set features 2" Drop Spindles, Steering Arms, and Wilwood brakes with Drilled/Slotted Rotors and Black Calipers.
Includes: | Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMA6872X) | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078) | Southwest Speed 2" Drop Spindles (SWS Part # 103-9776) | Southwest Speed Steering Arms (SWS Part # 101-9652).
Wilwood Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part # 140-10996-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.

QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
Easier to use and less messy than an inconvenient hand pump.
EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
90 to 120 PSI (6-8 bar) air supply requirement.
25-ounce (0.75L) approximate refill container capacity.
Includes different adapter sizes to accurately fit your application.
CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.

General's water jets are ideal for clearing soft stoppages and ice from clogged drain lines.
A removable 150 ft. Capacity hose Reel with Reel brake and swivel is mounted on a heavy-duty Frame with two 8 in. Semi-pneumatic Tires. Complete with....
Standard safety features include a thermal relief valve to protect the pump from heat damage, along with a back flow check valve and inlet filter. An....

Clears most roller rockers and valvetrain components.
Will not fit 1986 & later Corvette aluminum heads or 1987 & later SB Chevy cast iron heads.
May interfere with some factory accessory brackets and power brake boosters.
Edelbrock 4263 Valve Cover, Elite II, SBC 262-400 V8, Tall Profile, Polished.

The MV6400 is intended for filling reservoirs with fluids such as engine coolant, motor oil, or wiper, automatic transmission, brake or power steering fluid. However, with the proper accessories it can safely be used to pressure bleed hydraulic brake or clutch systems, or refill or top-off sealed automatic transmissions..
An integrated manual pump dispenses fluid by pressurizing the 1.2 gallon (5 liter) reservoir and Includes a thumb-operated tilt valve that is conveniently located for manual pressure relief and doubles as a safety valve to prevent over pressurization..
Fluid is continually dispensed as long as there is pressure in the reservoir and freeing up the operator’s hands.
pumping is only required to build additional pressure..
The pump tube is sealed to prevent exposure to chemicals and cleans easily between fluid changes..
For convenience and speed, push-to-connect, quick-change-style couplers are used at both ends of the fluid dispensing hose..

This Air Dryers not only "dry" but they do collect and remove the most of the air system debris and contaminants in all forms, before they make it to the brake system.
Cleaner air means better performance and longer life to brake system.
Engineered and Designed to work under the most rough performance conditions.
Please make sure this is the right part that fits your Truck. Find the part number you are looking for and make sure of your choice.

【Function】The 10 pounds residual pressure is used to hold pressure against the springs in the drum.This allows the drum brake to engage faster and....
【Size】76x19mm / 2.99"x0.75". Made of Metal. Duty Automotive Grade Chrome Retainer and Black Thermoplastic Cap.
【Easy Install】Easy Install, no complicated steps and no complicated tools required..
【Fitment】Fit for the end of the valve has a pipe thread that accepts the common 3/8-24 inverted flare Male Fittings..
【Package Includes】1pcs residual pressure valve.