ReviewsCmz16gx3m2a1600c10s

HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion....
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not....
Check Stock

Spicer 30637 Spindle Nut Retainer

  • Chevrolet c10 panel 1967, c10 pickup 1972-67, c10 suburban 1972-67, c20 panel 1967, c20 pickup 1972-64, c20 suburban 1972-64, c30 1986-75, c30 pickup 1974, c3500 1998-88, express 2500 2013-03, express 3500 2001-96, g10 van 1972-68.
Check Stock

Spicer 706046X Pinion Bearing Kit

  • Differential pinion bearing kit (cup/cone) - Dana 44.
  • Chevrolet c10 panel 1967, c10 pickup 1972-67, c10 suburban 1972-67, c20 panel 1967, c20 pickup 1972-64, c20 suburban 1972-64, express 2500 2013-03, g10 van 1972-68, g30 1991-75, g30 van 1974-73, k10 pickup 1972-67.
Check Stock

3V 1Amp Power Adapter Supply 100-240 AC to DC 3Volt 1000mA 2.1mm X 5.5mm Plug 3V 1A AC/DC Power Supply Transformer

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion....
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not....
Check Stock

HFS (R) 200Pcs M2 M2.5 M3 M4 Slotted Spring Pin Assortment Kit, 304 Stainless Steel

  • [MATERIAL]: The product is made of 304 stainless steel, corrosion-resistant, durable, rust proof, high tensile strength..
  • [SIZE]: 15PCS M2*6mm(0.236''),15PCS M2*8mm(0.315''),15PCS M2*10mm(0.394''),15PCS M2*12mm(0.472''),15PCS M2.5*6mm(0.236''),15PCS M2.5*8mm(0.315''),15PCS M2.5*10mm(0.394''),15PCS M2.5*12mm(0.472''),10PCS M3*6mm(0.236''),10PCS M3*8mm(0.315''),10PCS M3*10mm(0.394''),10PCS M3*12mm(0.472''),10PCS M4*8mm(0.315''),10PCS M4*10mm(0.394''),10PCS M4*12mm(0.472''),10PCS M4*16mm(0.63'').
  • [EXQUISITE PACKAGING]: The product is equipped with a translucent storage box. The inside of the storage box is evenly divided into multiple storage tanks, which are used to store products of different sizes for easy identification and use.
  • [HIGH PERFORMANCE]: The product is axially slotted and chamfered at both ends to strengthen the positioning, connection and fixation of parts.
  • [WIDE APPLICATION]: It is suitable for various working environment, widely used in automobile, machinery, garage, workshop and power equipment, which can save you a lot of time and money..
Check Stock

La Cumbia De Los Tornillos Y Tuercas

  • √ [Larger Quantity: 1260 Pieces, Various M2 M3 M4 Screws with Nuts and Flat Washers Meet All Demands] Nice set screw assortment kit. M2: Bolts are in 7 lengths: 4mm, 6mm, 8mm, 12mm, 16mm, 20mm, 25mm. Each length 20 x bolts.
  • 140 x M2 Washers. M3: Bolt length: 4mm, 8mm, 12mm, 16mm, 18mm, 20mm, 30mm. Each length 20 x bolts.
  • 140 x M3 Washers. M4: Bolt length: 6mm, 8mm, 10mm, 14mm, 18mm, 20mm, 30mm. Each length 20 x bolts.
  • √ [21 Sizes More Choices, Custom 7 Lengths for 1 Model, Screws Assortment Accord with Standardized Metric System] Different size of M2 M3 M4 screws and nuts total 1260pcs. The average error is less than 0.01mm..
  • √ [High Quality 12.9 Grade Alloy Steel. More Than 20 Years of Experience in Fastener Tool Production] Nice Screws assortment, durable nuts and bolts. Extraordinary Technology & Professional & Durability..
  • √ [Please Note: Add a Little Anti-Rust Oil To The Product, In Order To Be More Durable] It's Anti-Rust Oil, Not Rust. Each screw is packed separately in a transparent bag, and then put in the box to avoid confusion. Storage: Assorted screws all are stored in one storage bin box, easy and convenient for storing and carrying, in case of missing or ....
Check Stock

GPIO Status LED Terminal Block Breakout Board for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • GPIO status LED and power 5V / 3.3V indication..
  • GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
  • Support for Raspberry Pi A+, 3A+, B+, 2B, 3B, 3B+, 4B.
  • Terminal block pitch 3.5mm, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm..
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi module).
Check Stock

Timing Belt Kit Water Pump w/Gaskets Tensioner Fits 1996-2000 For Honda Civic 1.6L SOHC D16Y5 D16Y7 D16Y8 16 Valve

  • Timing Belt Kit Water Pump w/ Gaskets Tensioner Fits 1996-2000 For Honda Civic 1.6L SOHC D16Y5 D16Y7 D16Y8 16 Valve.
  • Includes timing belt, and tensioner pulleys to replace the full timing system.
  • Made and test to fit and meet the specifications of the OE parts being replaced.
  • Premium quality tensioner and idler pulleys help to assure correct tension and operation.
  • Part Number:TBK224, WP4029, 41048, TSW224, 14510P2A003, 5410XS，TS26224, ITM224, 135-1390, AW9352, 19200-P2A-A02,14400-P28-004,14520-P2A-305,19200-P2A-A01,TCKWP224,WP224K1B, TB224LK2, WPH-011V, 1351390.
Check Stock

RuoFeng Black Cylindrical Head Hexagon Screw Nut Bolt Set Carbon Steel M2 M3 M4 M5 Cup Head Socket Cap Screws Box 1060pcs with 4 Small Spanners

  • [Nut & Bolt Assortment Sets] 1060Pcs Screw And Nuts Includes M2*8/M2*12/M2*16/M2*20, Each 45Pcs. M3*8/M3*12/M3*16/M3*20, Each 20Pcs. M4*8/M4*12/M4*16/M4*20, Each 10Pcs. M5*8/M5*12/M5*16/M5*20, Each 10 Pcs. M4/M5 Nuts And Washers, Each 45Pcs. M2 Nuts And Washers, Each 185Pcs. M3 Nuts And Washers, Each 85 Pcs. We Also Provide Four Free Relevant Wrenchs In Our Sets.
  • [Widely Used] Bolts Nuts And Washer Assortment Kit Are Widely Used And Suitable for Professionals, Repairmen, etc. When You're Mad About The Missing Bolt, It's The Right Choice for You. The Kit Can Be Widely Used in All Kinds of Precision Machinery Industry, Instruments, Electronic Products, Household Appliances, Locks, Lamps, Toys, etc. There Are Many Different Sizes of Kits, Which Can Greatly Meet Your Different Needs.
  • [Nuts And Bolts Organizers And Storage] All The Hex Screws, Nuts And Washers Will Be Packed in A Strong Plastic Box, Which Can be Used as A Storage Box. It's A Good Choice to Put It in The Drawer Or Storage Room at Home. It Has Complete Functions And Is Easy to Use. It's Very Convenient to Take It Out for Use, Saving Time And Effort.
  • [Product Process] Oxidation Blackening Process, Fine Workmanship, Smooth Surface, Deep Thread, Uniform Force, Not Easy to Slip or Loose, Stron....
Check Stock

999038 999026 NEW Japanese Carbon Brushes compatible with Hitachi C12LDH P50SA HU12M 18 x 13 x 7mm

  • FBA.Dimension : 18 x 13 x 7mm. Original Code :999038 999026. Product Type : Replacement (Aftermarket). Condition : New. Material: Japanese TOYO TANSO Carbon.Item locationg:USA.Made In China..
  • Compatible with: Hitachi Saw: C10FCE C10FCH C12 C12FDH C12FSA C12LC C12LCH C12LDH C12LSH C12RSH C6NT C7BD C7BD2 C7BMR C7SB C7SB2 C7YA C8 C8U C8V C9 C9BA2 C9BU2 C9SA2 C9U C9U2 CC12SA CC14SA CC14SB CS28B CS35B CS280A CS350B..
  • Compatible with: Hitachi Angle: GP13 G18 G18DF G18SC G18SD G23SA G23SB FY-40B.Polisher: SAH -180 SR15 SR15M. Sander / grinder: S18Y SB11 SB110..
  • Compatible with: Hitachi Hammer drill / drill: BM60M BM60Y BLU4 BM35T1 IE45MR IE50SA IE50SA1 IE50SB IE55 DU-PN2 H55SA H55SB H55SC. Planing: P20SD P40 P50 P50K P50SA PDE -180 PG21SA..
  • Compatible with: Hitachi Crosscut and miter saw: CC12SA-M CC16 CC16M HU12 HU14 HU12M HU14M. Nibblers / Scissors: CN45SA CN60SA..
Check Stock

AYAM (Ayam) Coconut Milk Powder (50gX3 bags ON)

  • Ingredients: coconut, maltodextrin, casein Na.
  • Product size (height x depth x width): 158.0mmX35.
Check Stock